Introduction
Congratulations on the purchase of your new CHAUVET par lighting system. We
are confident you will enjoy many trouble free hours with this unit. To assist with the
care and use of the product we have prepared this short guide.
System Components
The PAR-38 SYSTEM comes complete with 4-Par 38 black cans, 4-150w bulbs,
1-Lightweight stand, 1-4 channel multi-function controller, 1-Foot switch, and 4-
Colored gels.
Operation
Multi-Function Controller/Foot Switch-
The unit has been designed to hold a maximum 2,400 watts. Unit features 4 chan-
nels with one AC outlet per channel. Simply plug par cans into the AC outlets on
the front. Unit will chase to music via the built in microphone and automatically
advance through the built in 16 chase patterns. Indicator lights on top of unit
will flash according to pattern. Adjust sound sensitivity via knob on front of unit.
Controllers may be linked for added versatility via CH-DIN10 linking cable (sold
seperately). Utilize Foot Switch to control the functions. Functions include All On,
Chasing, and Blackout
System Includes:
4 Black Par 38 Cans
4 150w bulbs
1 Multi-Function
Controller
1 Foot Switch
4 Color Gels
Lightweight Stand- WARNING: DO NOT OVERTIGHTEN KNOBS OR SCREWS
Loosen leg extension knob and pull outwards on legs to widest position for opti-
mum stability. Tighten leg extension knob. Tighten set screw with supplied allen
wrench.
Loosen lower pole extension knob and pull pole upwards to fully extend lower
pole. Tighten pole extension knob. Tighten set screw with supplied allen wrench.
Loosen lighting bar knob. Snap lighting bar into upper pole extension.
Using supplied mounting screws, secure par cans to lighting bar. Take care to
balance weight evenly.
Loosen upper pole extension knob and raise pole to desired height. Stand
extends a maximum of 9ft.
Installation/Mounting
This unit has been designed to be set on a flat level surface. Failure to do so
could cause serious injury.
Cleaning
The body of the unit should be cleaned with a soft damp cloth.
Maintenance & Servicing
Work on internal parts should be carried out by a qualified technician. Removal
of any covers other than the lamp replacement access or the fuseholder is con-
sidered a breach of warranty and will not be covered under any such agreement
unless authorized first by CHAUVET.
