Chef-Master HEA794 User manual

Chefmaster Warming Tray
Instruction Manual
Model
HEA794 - Aluminum 570x305x40mm Warming Tray
HEA795 - Aluminum 670x505x40mm Warming Tray
HEA796 - Aluminum 1070x330x40mm Warming Tray
HEA797 –Plastic Warming Tray

2
Thank you for purchasing your Chefmaster Warming Tray. To make full
use of the product please read this manual carefully before using the
product and keep it safe for future reference.
Safety Tips
If you find any damage when the product is unpacked, contact your
Chefmaster supplier within 24 hours of receipt of goods
Always position on a flat stable surface
Repairs should always be carried out by a qualified technician
Do not use this product outside
Do not carry when hot
Always switch off and unplug the unit before cleaning
Move by holding the product by the base
Ensure the base of the container is clean before using
If the glass is cracked disconnect from the power supply and contact
your Chefmaster distributor
Always store flat and do no store products on top of it
If the power cord becomes damaged it must be replaced by a qualified
technician
This product is not designed to be used by persons with reduced
physical or mental capabilities, lack of experience or knowledge, unless
they are given suitable supervision, this includes children.
Pack Contents
1 x Chefmaster Warming Tray
Before Use
Remove all packaging including all protective plastic, from your
Chefmaster Warming Tray
Position on a flat surface
Wipe the warming tray with a damp soft cloth before first use
Plug your Chefmaster Warming Tray into the mains
The warming tray will now be ready to turn on

3
Operation
Ensure the warming tray is plugged in and the power is on
Select the heat setting you require
When the tray is warming to the desired temperature the red light will be
on
Once the desired temperature has been reached the red light will go off
Place containers on the warming tray
Cleaning & Maintenance
Before cleaning disconnect the warming tray from the electricity supply.
Once the tray has cooled wipe with a damp soft cloth
When finished cleaning, wipe dry
DO NOT submerge the warming tray in water or use water sprays to
clean it
Always clean your Chefmaster Warming Tray daily
Troubleshooting
Fault
Possible Cause
Solution
Warming tray not working
The unit is not switched
on
The plug or lead are
damaged
The fuse has blown
Internal wiring fault
Check the unit is plugged in
and switched on
Contact your Chefmaster
distributor
Replace the fuse
Contact your Chefmaster
distributor
Transportation and Storage
Please handle your warming tray with care to prevent any damage to the unit
and internal parts. The warming tray should be stored somewhere which is
ventilated and has non-corrosive gas.
Do not store any flammable objects near the equipment.
Technical Information
HEA794 –Aluminum 570x305x40mm Warming Tray
Voltage ~230v 50/60Hz
Power 160watt
Weight 3.5kg

4
HEA795 –Aluminum 670x505x40mm Warming Tray
Voltage ~230v 50/60Hz
Power 300watt
Weight 5.9kg
HEA796 –Aluminum 1070x330x40mm Warming Tray
Voltage ~230v 50/60Hz
Power 300watt
Weight 6.5kg
HEA797 –Plastic 510x305x40mm Warming Tray
Voltage ~230v 50/60Hz
Power 200watt
Weight 2.5kg
Chefmaster Warming Tray is supplied with a 3 pin plug and lead with a
13 amp fuse
Appliance must be earthed
If in doubt contact a qualified electrician or your Chefmaster distributor
Disposal
Under WEEE regulations this product must not be disposed of as household
waste. To prevent damage to the environment and humans this product must
be disposed of in an approved and environmentally friendly recycling process.
For more information on how to dispose of this correctly please contact your
Chefmaster distributor or local authority responsible for waste disposal.
Compliance
All Chefmaster parts and products have under gone a stringent testing process
to ensure that comply with all European standards and specifications.
All Chefmaster products carry the CE approval symbol.