User Manual
Read and understand all instructions before using this
appliance. CAUTION! HOT SURFACE! HIGH TEMPERATURE!
Warnings
•Do not use this product outside.
This appliance must be placed on a level surface.
Do not leave this appliance unattended while it is in use.
Never immerse the appliance in water.
Do not operate the kettle while it is empty.
Do not overfill the appliance with water.
Never move or carry the kettle when it is “ON” or if it is full of hot liquids.
Do not attempt to repair or replace the power cord if it becomes damaged. Contact a
qualified service agent.
Be careful not to touch any hot surfaces. Make sure the power cord does not come in
contact with any hot surfaces.
Always switch off and disconnect the power supply to the appliance when not in use.
This product is not designed to be used by persons with reduced physical or menta
capabilities, lack of experience or knowledge, unless they are given suitable
supervision, this includes children.
Operation
Carefully unpack the soup kettle warmer and inspect it for
damage.
Add 0.6 liters of water to the kettle before placing the soup kettle insert into the warmer.
Never over-fill with water. Under no circumstances should the inner container float
even when empty. If the container floats, remove any excess water immediately.
Turn the warmer on. The indicator light will glow, showing that the unit is on. Adjust the
temperature control dial to the correct setting:
a: Settings 8-12 are designed for initial warm-up
b: Normal control settings range from1-8