Chiayo Stage Man User manual

Professional Wireless Portable Amplifier
ISO 9001:2008
GREEN PRODUCT
World Genius Convention
Silver Medal
Operation manual

-1-
Congratulations and thank you for purchasing this all-in-one portable sound system. To ensure
a trouble-free operation, please read the manual thoroughly to fully understand its controls and
functions.
STAGE MAN can be optionally installed with wireless receiver/transmitter/MP3 recorder
player/Bluetooth receiver modules, as well as CD player, DVD player and digital recorder
player. The wireless receiver/transmitter module is UHF band and plus PLL synthesized type
with 16 or 100 preset frequencies.
Configuration
STAGE MAN may come equipped with the following:
1. AC power cord
2. 1~4 wireless receiver/transmitter/MP3 recorder player/Bluetooth receiver modules
3. 1~4 transmitters, either handheld or bodypack transmitter (except version with no module
installed).
4. 1 CD player, DVD player and digital recorder player.
Optional accessories
1. Weather proof dust cover.
2. Tripod stand
3. Passive speaker
4. Wired microphone
5. One/two- unit trolley
Remark
Manufacturer reserves the rights to change the above combinations without prior notice.

ISO 9001 / ISO 14001 / OHSAS 18001
-2-
Parts and functions on STAGE MAN control panel
1. Mic/Line #1 volume control
2. Mic/Line level switch #1
3. Min/Line input #1
4. Mic/Line #2 volume control
5. Mic/Line level switch #2
6. Min/Line input #2
7. Line in volume control
8. Line in (3.5mm)
9. Reverb control
10.Master volume control
11.Treble control
12.Bass control
13.Aux output
14.External speaker output
15.Master Limiter indicator
16.Battery indicator
17.Charging indicator
18.Fuse
19.DC in (30-32V/4A)
20.Power on/off
Parts and functions on STAGE SPEAKER control panel
1. Audio input

-3-
Starting to operate STAGE MAN
First of all, please charge for at least 4~6 hours because the built-in rechargeable battery might
have been discharged naturally due to long shipment and storage time, even though it has
been fully charged in the factory prior to the shipment.
To operate this portable sound unit, please switch on the main POWER switch. However, if the
battery indicator stops at 40%, it means the battery is getting weak and instant recharging is
necessary.
The main POWER switch does NOT switch on the other devices since each of them has
individual Power/Volume control. To operate those, you have to switch them on accordingly.
Operating the wired microphone/LINE audio input
1. Connect the signal cable, XLR of 6.3mm, of the microphone or audio device to the INPUT
1(2) jack.
2. Set the INPUT 1(2) volume to minimum before turning on the amplifier.
3. Depending on different audio sources, the MIC mode of the switch (○
2, ○ 5) is for wired
microphone and the LINE is for music level.
Music audio input
1. STAGE MAN accepts one 3.5mm unbalanced audio input.
2. Set the LINE volume to minimum before turning on the amplifier.
Limiter Function
There’s an interior anti-overload circuit to protect the amplifier from being damaged due to over
volume output, this design will automatically lower the output when it goes over the limit.
Various audio outputs
Aux out: This 6.3mm jack is used as audio output connection to another active amplifier.
Speaker out: This 6.3mm jack is used as audio output connection to another passive amplifier.
Recharging the battery
STAGE MAN uses either two lead-acid batteries or one lithium battery. The battery power is
leveled from 40%, 60%, 80% and FULL. If the LED stays at 40%, the battery might not be
sustainable for long operation. During recharging the indicator LED will flash RED until the
battery power is full, at which the LED stays GREEN. However, if there is no battery inside or
the battery has problem, the charging LED will stays YELLOW.
Operating the wireless modules
STAGE MAN can be optionally installed with wireless receiver/transmitter/MP3 recorder
player/Bluetooth receiver modules, as well as CD player, DVD player and digital recorder
player. Please refer to individual instructions in the following.

ISO 9001 / ISO 14001 / OHSAS 18001
-4-
SDR-5116M/SDR-5100M IrDA receiver modules
1 2 3 4
5 6 7 8
1. Channel indicator
2. Diversity A/B indicator
3. Audio signal indicator
4. IR sensor area (SDR-5100M IrDA)
5. Channel Selector
6. IRDA synchronization button (SDR-5100M IrDA)
7. Squelch control
8. Power switch/volume control
First turn on the Power of the main unit. Then turn on the individual power of the receiver module.
Select a desired channel by pressing the ▲or ▼button and the corresponding channel on the
Transmitter.
Squelch (SQ) setting
When a channel is in use and undesired interference signal is received, turn the SQ in clockwise
direction to make the receiver less sensitive and thus less susceptible to interference. If this still
does not solve the problem, it means this frequency is not applicable at current position. Please
switch over to the next channel.
Channel synchronizing of the receiver and microphone (SDR-5100M IrDA)
1.Limit the distance between the receiver and transmitter within 30cm.
2.Align both infrared areas
3.To change the receiver’s channel, please press the synchronizing button of the microphone.
The microphone's LED will grow to imply synchronizing signal transmitted and the receiver's
channel LED will flash then change to new channel. If the channel LED shows "EC", it means
the receiver and microphone don't have the same frequency band and synchronization isn't
doable.
4.To change the microphones channel, please press the SYNC button of the receiver. The
channel LED will flash to transmit synchronizing signal to the microphone. If its LED shows
"EC", it means the receiver and microphone don't have the same frequency band and
synchronization isn't doable.
RP-5016M transmitter module
1 2
3 4 5 6 7 8
1. Channel indicator

-5-
2. Antenna socket(TNC type)
3. Channel selectors: Press ▲(up)▼(down) to increase/decrease channel number. Please
select a non-interfering frequency channel to those used in the receiver modules.
4. Power on/off
5. Unit GAIN control: This controls the GAIN level of interior audio sources.
6. 3.5mm audio input jack
7. AUX IN GAIN control: This controls the GAIN level of external audio input.
8. Output power setting: LOW(left) for Low output power and HI(right) for high output power. Low
output power will reduce the RF transmission distance and High output power will extend the
possible RF transmission distance.n time than Low output power since it requires more power
for longer RF transmission.
DP-500M MP3 module
1 2 3 4 8
9 10 5 11 6 7 12
1. LCD display
2. Press to return to previous track, press and hold to fast reverse.
3. Press to play/pause
4. Press to go to next track, press and hold to fast forward.
5. Press to return to previous folder.
6. Press to change play modes, press and hold to switch repeat modes.
7. Press to go to next folder.
8. IR sensor area
9. USB 2.0 input
10. USB/SD indicator: The LED flashes during play and extinguishes
when stop.
11. SD card input
12. Power switch/volume control
To use the USB/SD digital player, simply plug your USB/SD card into
the port after the player is turned on. To prevent any possible damage to the USB/SD card,
always detach it after the player has been shut off.
Operating functions on the panel and the remote
Operating function
On the panel
On the remote
Play/pause
Press II
Skip forward
Press 
Press I
Fast forward
Press and hold 
Press and hold I
Skip backward
Press 
Press I

ISO 9001 / ISO 14001 / OHSAS 18001
-6-
※Remarks:
1. Changes of tracks, EQ and play modes will only be saved 5 seconds after the setting.
2. If the SD or USB are not detected, please try by inserting it again.
3. The player reboots to read whichever is last inserted.
4. This player can read MP3 files only. Other formats such as WMA and WAV aren't supported .
The USB and SD card must be FAT/FAT32 formatted.
DPR-500M MP3 recorder player module
1 2 3 4 8
9 10 5 11 6 7 12
1. LCD display.
2. Press to return to previous track, press and hold to fast reverse.
3. Press to play/pause.
4. Press to go to next track, press and hold to fast forward.
5. Press to record.
6. Press to switch repeat modes.
7. Press to stop playing or recording.
8. IR sensor area
9. USB 2.0 input
10. USB/SD indicator: The LED flashes green during playing and
red during recording. It lights red if there is no track to play,
lighting green when playing or recording stops.
11. SD card input
12. Power switch/volume control
Operating functions on the panel and the remote
Fast backward
Press and hold 
Press and hold I
Next folder
Press 
-
Previous folder
Press 
-
Track select (button #0-9)
-
input track number, then
press II
Repeat mode switch
(ALL/RANDOM/SINGLE/FLDER)
Press and hold MODE
Press MODE
EQ mode switch
(POP/ROCK/JAZZ/CLASSIC/COUNTRY/NORMAL)
Press MODE
Press EQ
Operating function
On the panel
On the remote
Play/pause
Press II
Record
Press●to record and ■to
stop.
Press REC to record and ■to
stop.

-7-
※Extra attention to recording
1. Recordable only when USB/SD is detected.
2. Record files will be stored in the RECORD folder of USB/SD.
3. The files will be named as FILE_001, FILE_002, FILE_003…etc.
4. The name of a deleted track won’t be applied to its next one.
5. Recordable until FILE_999 appears with LCD displaying Num Full.
6. LCD displays USB FULL or SD FULL when insufficient memory left.
7. LCD displays SD LOK if the SD is locked.
8. Don’t remove the USB/SD during the recording process in case the interrupted track might be
damaged.
BT-500M Bluetooth receiver module
1 2 3
1. SCAN LED
2. LOCK LED
3. Power/volume control
Matching instruction
1. Turn on BT-500M and both SCAN and LOCK LEDs will flash alternatively.
2. Activate Bluetooth on your device and search new external Bluetooth devices.
3. Find and connect to “Bluetooth Speaker” that appears on your option list.
4. Once connection is made, the LOCK LED will flash green.
Skip forward
Press I
PressI
Fast forward
Press and hold I
Press and hold I
Skip backward
Press I
Press I
Fast backward
Press and hold I
Press and hold I
Next folder
-
Press 
Previous folder
-
Press 
Track select (button #0-9)
-
input track number,
then press II
USB/SD switch
-
Press USB/SD
Repeat mode switch
(ALL/RANDOM/SINGLE/FLDER)
PressMODE
Press MODE
Volume control
-
Press or
A-B section play
-
Press A-B to start, again to play
section and again to stop
Delete tracks
-
Press DEL to delete track and
again to confirm your delete
Mute
press MUTE to mute/recover

ISO 9001 / ISO 14001 / OHSAS 18001
-8-
Operating the CD player
Parts and functions
1 2 3 4 5 11
6 7 8 9 10
1. LCD display
2. Play/pause
3. Stop
4. Rev-Skip-Cue
5. Eject
6. CD/USB selector
7. Repeat
8. Folder skip
9. IR led
10. USB input
11. Power/volume control
Keys
Functions
Panel
Remote
PLAY/PAUSE
When this key is pushed during CD stop, play will start after track
search.
When this key is pushed during CD is playing, it will be changed to
pause.
When this key is pushed during CD is pausing, it will be changed to
play.
V
V
STOP
When CD is not stop, if this key is pushed then CD will stop.
V
V
FUNC
When press this key will change between CD and USB mode.
V
V
UP/CUE
In stop mode:
Change the starting play track (file) during stop mode, cyclic to the first
track, if it is in the last track.
In program entry mode:
Change to the next track(file) for program select .
In play mode, pause mode, program play mode, random play mode:
Single pressed, skip the playing track (file) to next track (file) for normal
play/pause mode, to next program index track(file) for program
play/pause mode, to next random track(file) for random play /pause
mode.
Continue pressed, fast forward during play/pause when pressed more
than 0.7sec.
V
V
DONW/REV
In stop mode:
Change the starting play track (file) during stop mode, cyclic to the last
track, if it is in the first track.
In program Entry mode:
Change to the previous track (file) for program select.
In play mode, pause mode, program play mode:
Single pressed, skip the playing track (file) to precious track (file) for
normal play/pause mode, to previous program index track (file) for
program play/pause mode.
Continue pressed, fast reverse during play/pause when pressed more
than 0.7sec.
V
V
FOLDER-UP
In stop mode:
Skip the starting play folder to next folder during stop mode, cyclic to
the first folder if it is in the last folder.
In program entry mode:
Change the file for program select to next folder’s first file, cyclic to the
first folder if it is in the last folder.
In normal play mode:
Skip the playing file to the next folder’s first file.
V
V

-9-
FOLDER-DOWN
In stop mode:
Skip the starting play folder to previous folder during stop mode, cyclic
to the last folder if it is in the first folder.
In program entry mode:
Change the file for program select to previous folder’s first file, cyclic to
the last folder if it is in the first folder.
In normal play mode:
Skip the playing file to the previous folder’s first file.
V
V
REPEAT
In mp3 mode and in USB mode .
If this key is pushed, PLAY mode is changed cyclically shown below.
PLAY ALL RANDOM→REPEAT TRACK→REPEAT
FOLDER→REPEAT ALL→RANDOM REPEAT→PLAY ALL
IN CD mode If this key is pushed, PLAY mode is changed cyclically
shown below.
PLAY ALL RANDOM→REPEAT TRACK→REPEAT ALL→RANDOM
REPEAT→PLAY ALL.
V
EJECT
When this key is pushed, door is moved out.
V
V
PROG
Set to programming mode.
When programming mode, “stop” key is pushed then program is all
cleared.
V
MUTE
When this key is pushed during CD is playing, the set will mute the
output. Pushing again can recovery the output.
V
POWER
Power SW of the set.
V
V
ESP
In CDDA mode, Press ”ESP” key, The ESP display lighted and the set
is in electronic anti-shock state. The electronic anti-shock time is about
40 seconds. Press “ESP” key again, cancel the ESP function.
V
ID3
When this key is pressed , the“ID3”in the LCD display will flash, and the
ID3 TAG is displayed pressing this key again will cancel the ID3
function
V
0~10
You can use these keys to select the track you want directly.
V
VOL.-
When this key is pushed, the volume will decrease by 1dB per step, the
min. volume is 0dB.
V
V
VOL.+
When this key is pushed, the volume will increase by 1dB per step, the
max. volume is 30dB.
V
V
Caution: This player does not accept 8-cm diameter CD. User is advised to have the USB 2.0
formatted in “FAT”or “FAT 32”. The built-in USB 2.0 player can not be able to read the MP3 files
stored in your USB if it is not formatted by either “FAT”or “FAT-32”. To avoid damage to the
USB, remember to detach it only after switching off the player.