Child Craft Abbott F01916 User manual

1
AB20145C
AB20145_G1
Dressing Table
Foundations®Worldwide, Inc.
5216 Portside Dr, Medina OH 44256 USA • PH: 1 330.722.5033 • FAX: [phone]
www.childcraftbaby.com
Abbott Dressing Table
ASSEMBLY ASSISTANCE
IMPORTANT: retain for future reference read
carefully.
Foundations strives for the highest quality in our
products but occasionally a missing part or problem
can occur during assembly.
If any parts are missing or broken or you need
assistance with assembly, DO NOT return the
product to your dealer. Go to our website at
www.childcraftbaby.com or call Foundations
for assistance at 1-877-716-2757 (U.S. Only) or
1-330-722-5033 (Monday through Friday, 9:00
a.m.– 4:00 p.m. Eastern Time). Please have the
model number and manufacture date available
when you call or write us at:
Foundations, 5216 Portside Dr. Medina OH 44256
Read all instructions BEFORE assembly and USE of product.
KEEP INSTRUCTIONS FOR FUTURE USE .
FOR CUSTOMER SERVICE CALL
1-877-716-2757
(outside of U.S. 330-722-5033). DO NOT CALL
RETAILER OR RESELLER FOR SERVICE
AS THEY ARE NOT AUTHORIZED TO
RESOLVE ANY SERVICE ISSUES.
FOR WARRANTY AND FEDERAL SAFETY
STANDARD COMPLIANCE CERTIFICATES,
PLEASE VISIT OUR WEBSITE AT
www.foundations.com
Record the information for your product here:
Model number:
Manufacture date:
PO number:
Models Covered: F01916
• Adult assembly required.
• Read all instructions BEFORE assembly and USE
of product.
• Unpack carton, remove packing materials,
including poly bag. Identify and check all parts.
ASSEMBLY INSTRUCTIONS

2
A. Front Assembly
B. Top Shelf Rail - Left
C. Top Shelf rail - Right
D. Middle / Bottom Shelf Rail
E. Top Shelf
F. Lower Shelf
G. Mattress Assembly
H. Dowel Pin 10mm x 40mm
I. Allen Head Bolt 6mm x 30mm
J. Allen Head Bolt 6mm x 20mm
K. Hex Nut 6mm
L. Nylon Washer
M. Allen Wrench 4mm
N. Male/Female Belt Sections
P. Anti Tip Kit
Hardware Package
AB20145_G3
H
I
J
K
L
M
N
P
Dressing Table Parts
PARTS LIST
Part Description Part Number Quantity
23100341
23100349
23100359
23100354
23100356
23100358
21100106
11200323
11200397
11200349
11200350
11300009
11200070
11100002
11200910
2
1
1
4
1
2
1
4
12
2
2
2
1
1
1
PREPARATION
Carefully remove and lay out all hardware and parts.
Check quantities and match the parts list.
Construct Dressing Table on an even at oor.
Note: during the assembly process whenever
using screws or bolts, Check each with the parts list
by letter and size identication. Place each screw
or bolt on the diagram of the item which is sketched
actual size. Be sure to use the proper size specied
in the assembly directions. If any parts are missing
or broken or you need assistance with assembly
DO NOT return your product to the dealer.
Please identify the Dressing Table by the model
number identication stamped on the inside face of
the assembly when you call or write to
Foundations. Make note of all identification
numbers and include this information with your
request.
DO NOT Substitute Parts!
AB20145_G2
A x 2
D x 4
B
C
EF
G

3
STEP 1
STEP 2
AB20145_G4
A
I
B
H
D
AB20145_G5
A
C
D
I
H

4
STEP 3
STEP 4
AB20145_G6
E
F
F
A
AB20145_G7
A
H
I