Childcare My Little Cloud User manual

MY LITTLE CLOUD
Swing Rocker Model # 037700-333
IMPORTANT:
RETAIN FOR FUTURE REFERENCE, READ CAREFULLY

32
Due to variations in the style and design of our products, the photographs and illustrations
shown in this instruction manual are generic, therefore product fabrics, colour and
design may vary from images shown. CNP Brands reserves the right to alter product
specications without notice as a result of our ongoing policy of product improvement.
Contents
Assembly contents list
Assembly / Operating instructions
How to care for your 2 in 1 Swing Rocker.
Congratulations on your purchase of the
Childcare 2 in 1 Swing Rocker.
This product has been designed and developed with
safety, comfort and functionality in mind. Please take
the time to read this manual carefully before using
this product and keep it in a safe place for future
reference.
Before assembling this swing, read and understand the instructions.
Incorrect assembly may make the swing unsafe. Do not use this swing
if any part is broken, torn or missing. Keep instructions in a safe place
for future reference.
Safety Precautions
Make sure all the locking equipment is installed well before using the cradle swing.
Do not use the cradle swing on an rough surface to avoid any injury to the infant.
Discontinue use of cradle swing when infant attempts to climb out.
Discontinue use of cradle swing when infant can roll over.
Never use the toy-bar to carry the cradle swing.
Age range suitability: 0 - 6mths/9kgs.
This cradle swing does not replace a cot or a bed. Should your child need to sleep, then it should
be placed in a suitable cot or bed.
Do not use accessories or replacement parts other than those approved by the manufacturer.
WARNING :FOLLOW THE MANUFACTURER’S
INSTRUCTIONS.
NEVER LEAVE THE CHILD UNATTENDED.
IT IS DANGEROUS TO USE THE RECLINED CRADLE ON AN
ELEVATED SURFACE (E.G A TABLE).
THIS PRODUCT IS NOT INTENDED FOR PROLONGED
PERIODS OF SLEEPING.
ALWAYS USE THE RESTRAINT SYSTEM.
DO NOT USE THIS PRODUCT ONCE YOUR CHILD CAN SIT
UP UNAIDED OR WEIGHS MORE THAN 9KG.
TO AVOID INJURY ENSURE THAT CHILDREN ARE KEPT
AWAY WHEN UNFOLDING AND FOLDING THIS PRODUCT.
DO NOT LET CHILDREN PLAY WITH THIS PRODUCT.
DO NOT MOVE OR LIFT THIS PRODUCT WITH THE BABY
INSIDE IT.
NEVER USE THIS PRODUCT ON AN ELEVATED SURFACE
(EG. A TABLE).

54
Supplied loose in box:
Seat fabric with canopy and pre-assembled
head support
Assembly Contents
Check what you have received...
You have received 1 box. Please check the contents of the box against the list below.
If anything is missing, please contact Customer Service. In Australia, contact CNP
Brands on 1300 667 137, in New Zealand contact Wainhouse Distribution on
0800 567 5000.
Seat support tube
Backrest tube
U
U
U
U
U
Cross tube
Left support tube group
x1
x1
x1
x1
x1
Assembly Contents
Right support tube group
Front leg
Rear leg
Hanging tubes
Left driving part
Right driving part
U
U
U
U
U
sT U
KL
x1
x1
x1
x1
x1
x1

76
Insert the seat support tube into the small holes of
the backrest tube. Ensure pop pins are pushed in
and they click into place.
Attach the seat cover to the seat frame by sliding
the top part of the seat fabric rst. Carefully slide the
bottom seat fabric over the tube.
Assembly / Operating Instructions
Assembling Seat Support
PLEASE NOTE: You may need the help of another adult.
1.
2.
Install the fabric xed steel wire into the small holes.
Push down rmly until they click into place.
3.
Assembly Contents
Rocking tubes
U
x1
Bouncer connect tube
U
x1
Toy bar with pre-assembled toys
U
x1
Front tray (pre-assembled)
U
x1
Power adapter (U)
U
x1

98
Ensure the push pins are engaged whilst sliding the
front tray into the holes. The tray will be secure once
you hear it click into position.
Install the cross support tube. Install the cross tube
by clicking onto the two hanging tubes.
Open the two driving system parts until you hear a
‘click’.
Insert rocking tubes into seat main plastic mould.
Insert bouncer connect tube into rocking tubes.
Ensure the tubes lock into place. Secure the two
press studs around the bottom of the seat pad.
Install the front and rear legs by pushing the driving
system parts into the upper part tube until you hear
it click into position. Note that the bottoms of the
front and rear legs should be both pointing outward
to ensure they are the correct way around.
Insert the three wings onto the toy bar.
Secure the backrest fabric onto the steel wire by
pressing the three button press studs together. The
fabric should be stretched rm over the wire.
4. Install the hanging tubes. Insert the two hanging
tubes into the plastic part holes until it clicks into
place. Ensure that the toy bar insert is located on the
left side whilst looking at the swing front on.
8.
5. 9.
6. 10.
7. 11.
Assembly / Operating Instructions
Assembling swing (continued) Assembling swing (continued)
Assembly / Operating Instructions
VIEW-A
SCREW
BATTERY BOX COVER
VIEW-A
SCREW
BATTERY BOX COVER
SPEED LIGHT
TIMING LIGHT
SPEED BUTTON(5 SPEED, PRESS THE
BUTTON TO MOVE TO NEXT SPEED)
TIMER BUTTON(3 TIMES, 15 MINUTES, 30 MINUTES,
60 MINUTES, PRESS BUTTON TO MOVE TO NEXT
TIMER FUCTION)
MUSIC BUTTON(16 MELODIES, PRESS
THE BUTTON TO MOVE TO NEXT ONE)
NATURE SONGS BUTTON(5 NATURE
SONGS, PRESS THE BUTTON TO
MOVE TO NEXT ONE)
SONG VOLUME DECREASE SONG VOLUME INCREASE
DC ADAPTOR CONNECTOR
BATTERY BOX COVER
SCREW
HOLD FOR 3-5 SECONDS TO TURN OFF MUSIC
SPEED LIGHT
TIMING LIGHT
SPEED BUTTON(5 SPEED, PRESS THE
BUTTON TO MOVE TO NEXT SPEED)
TIMER BUTTON(3 TIMES, 15 MINUTES, 30 MINUTES,
60 MINUTES, PRESS BUTTON TO MOVE TO NEXT
TIMER FUCTION)
MUSIC BUTTON(16 MELODIES, PRESS
THE BUTTON TO MOVE TO NEXT ONE)
NATURE SONGS BUTTON(5 NATURE
SONGS, PRESS THE BUTTON TO
MOVE TO NEXT ONE)
SONG VOLUME DECREASE SONG VOLUME INCREASE
DC ADAPTOR CONNECTOR
BATTERY BOX COVER
SCREW
HOLD FOR 3-5 SECONDS TO TURN OFF MUSIC

1110
Assembly / Operating Instructions
There are two positions of the backrest position. This can
easily be adjusted by pulling the handle of the backrest.
Adjust the positions of the toy bar. The toy bar can be hand
moved to different positions as you like. Easy for parents to
access baby.
Insert 2 x 1.5V AAA size batteries
and turn on the toy bar button,
then the toy bar can be turned
around automatically. Turn on the
light button can open the lamp
light.
Install the toy bar onto the swing. Insert the toy bar frame into
the main frame socket until it clicks into place.
12.
1.
2.
3.
Assembling swing (continued)
Functions
VIEW-A
SCREW
BATTERY BOX COVER
VIEW-A
SCREW
BATTERY BOX COVER
VIEW-A
SCREW
BATTERY BOX COVER
VIEW-A
SCREW
BATTERY BOX COVER
VIEW-A
SCREW
BATTERY BOX COVER
Assembly / Operating Instructions
Locate the swing/music box at the back of the main module with toy arm.
Unscrew the battery compartment cover.
Install 2 x ‘AAA’ (1.5V) alkaline batteries (not included) into battery compartment. Ensure that
the batteries are facing the appropriate polarity.
Replace the battery cover and screw back on.
WARNING:
Do not mix old and new batteries.
Do not mix alkaline, standard (carbon-zinc) or rechargeable (nickle-cadmium) batteries.
Adult supervision is required when charging rechargeable batteries.
Always remove at or exhausted batteries from the toy.
Do not short circuit the supply terminals.
Non-rechargeable batteries are not to be recharged
1.
2.
3.
4.
Battery power

1312
The swing can be folded by pressing the two
buttons on the two sides of the swing.
4.
To convert into a rocker, release the seat unit from the hanging tubes by pushing in the rear
buttons on the unit. This will engage the rocker to detatch.
To convert the rocker to stationary mode, extend both the feet so the rocker is secure.
5.
Functions (cont)
push in the rear buttons
located either side of
the unit
extend feet for
stationary mode
To release the front tray, press the front two side buttons in to release the tray.
6.
push in the front buttons
located either side of
the unit
Swing control functions
SPEED LIGHT
TIMING LIGHT
SPEED BUTTON(5 SPEED, PRESS THE
BUTTON TO MOVE TO NEXT SPEED)
TIMER BUTTON(3 TIMES, 15 MINUTES, 30 MINUTES,
60 MINUTES, PRESS BUTTON TO MOVE TO NEXT
TIMER FUCTION)
MUSIC BUTTON(16 MELODIES, PRESS
THE BUTTON TO MOVE TO NEXT ONE)
NATURE SONGS BUTTON(5 NATURE
SONGS, PRESS THE BUTTON TO
MOVE TO NEXT ONE)
SONG VOLUME DECREASE SONG VOLUME INCREASE
DC ADAPTOR CONNECTOR
BATTERY BOX COVER
SCREW
HOLD FOR 3-5 SECONDS TO TURN OFF MUSIC
Assembly / Operating Instructions
SPEED LIGHT
TIMING LIGHT
SPEED BUTTON(5 SPEED, PRESS THE
BUTTON TO MOVE TO NEXT SPEED)
TIMER BUTTON(3 TIMES, 15 MINUTES, 30 MINUTES,
60 MINUTES, PRESS BUTTON TO MOVE TO NEXT
TIMER FUCTION)
MUSIC BUTTON(16 MELODIES, PRESS
THE BUTTON TO MOVE TO NEXT ONE)
NATURE SONGS BUTTON(5 NATURE
SONGS, PRESS THE BUTTON TO
MOVE TO NEXT ONE)
SONG VOLUME DECREASE SONG VOLUME INCREASE
DC ADAPTOR CONNECTOR
BATTERY BOX COVER
SCREW
HOLD FOR 3-5 SECONDS TO TURN OFF MUSIC
Assembly / Operating Instructions
WARNING:
Transformers used with the infant swing are to be regularly examined for damage to the
cord, plug, enclosure and other parts, and in the event of such damage, they shall not be
used.
The infant swing shall only be used with the recommended transformer.
Please note: The adapter and the batteries cannot be used at the same time.
click
click
click
DC ADAPTER CONNECTOR

1514
Care Instructions
Cleaning:
To ensure the long-lasting use of your swing, do not use abrasive cleaners. Always store product in
a clean dry place.
Seat pad:
Remove from frame. Fasten buckles on seat restraint and seat pad. Machine wash with cold water,
gentle cycle. No bleach.
Snack tray:
Wipe clean with a damp cloth and mild soap. Air dry. Do not immerse in water.
Maintenance:
Always check parts regularly for tightness of screws, nuts and other fasteners - tighten or replace
if required. To maintain the safety of your swing, seek prompt repairs for bent, torn, worn or broken
parts.
Storage:
Always store product in a clean and dry place.
Remove batteries prior to placing unit in storage to prevent battery leakage/corrosion to battery
compartment.
Use only those parts and accessories approved by CNP Brands.
If you have any difculties in assembling the swing, please contact our Service Department.
In Australia, contact CNP Brands on 1300 667 137.
In New Zealand, contact Wainhouse Distribution on 0800 567 5000.
Assembly / Operating Instructions
Locate the swing/music box at the back of the main
module.
Unscrew the battery compartment cover.
Install 4 x ‘C’ (1.5V) alkaline batteries (not included)
into battery compartment. Ensure that the batteries
are facing the appropriate polarity.
Replace the battery cover and screw back on.
WARNING:
Do not mix old and new batteries.
Do not mix alkaline, standard (carbon-zinc) or
rechargeable (nickle-cadmium) batteries.
Adult supervision is required when charging
rechargeable batteries.
Always remove at or exhausted batteries from
the toy.
Do not short circuit the supply terminals.
Non-rechargeable batteries are not to be
recharged
1.
2.
3.
Battery power

Distributed in Australia by CNP Brands, 20 Calarco Drive, VIC, 3030
Customer Service 1300 667 137
W: www.cnpbrands.com.au
E: [email protected]
Distributed in New Zealand by Wainhouse Distribution, 2-6 Argyle St,
Morningside, PO Box 41-014, St Lukes, Auckland, New Zealand
Customer Service: 0800 567 5000
E: [email protected]