Childcare COSI-DL 091917 User manual

COSI-DL
Toddler Bed Model # 091917
IMPORTANT:
RETAIN FOR FUTURE REFERENCE, READ CAREFULLY

Suitable for children from 18 months up to a maximum weight of 23kgs.
Ensure the toddler bed is placed at a reasonable distance from curtains, blinds, heaters and power
points.
Ensure the toddler bed is completely assembled and check that all parts are securely tightened
before placing the child into the toddler bed.
Ensure medication, string, elastic, small toys or small items such as money etc. are always kept out
of the childs reach when in the toddler bed.
Do not place items with string, cord or ribbon around a childs neck such as hood strings or pacier
cords.
Do not suspend strings over toddler bed for any reason.
Do not over tighten bolts.
Ensure that the child is clear of any moving parts when adjusting the toddler bed.
Retain your sales receipt to provide proof of purchase.
RECOMMENDED MATTRESS SIZE (SOLD SEPERATELY)
This toddler bed has been manufactured for use with a mattress which measures 690mm wide x
1300mm long x 100-150mm thick. The width and length are specied because it is important that
the gaps between the mattress and the sides and ends of the toddler bed will not exceed 40mm.
this is to minimise the risk of a child’s limb being caught in the gap.
Read all instructions before assembly and use of the toddler bed. Keep
instructions for future use.
Safety Precautions
THIS PRODUCT CONTAINS SMALL PARTS WHICH ARE FOR
ADULT ASSEMBLY ONLY.
AS SMALL PARTS ARE INVOLVED IN ASSEMBLY, CHILDREN
SHOULD BE KEPT CLEAR OF THE ASSEMBLY AREA.
IDENTIFY ALL PARTS AND COMPONENTS, CLEAR AN AREA
ON THE FLOOR FOR ASSEMBLY AND PLACE A SHEET ON
THE FLOOR TO ENSURE THE TODDLER BED WILL NOT BE
SCRATCHED DURING ASSEMBLY.
DISPOSE OF ALL PACKAGING MATERIAL IMMEDIATELY
AFTER THE TODDLER BED IS ASSEMBLED.
FAILURE TO FOLLOW THESE WARNINGS AND THE
ASEMBLY INSTRUCTIONS COULD RESULT IN SERIOUS
INJURY OR DEATH FROM STRANGULATION.
DO NOT PLACE BED NEAR WINDOW WHERE CORDS FROM
BLINDS OR DRAPES MAY STRANGLE A CHILD.
WARNING

3
Due to variations in the style and design of our products, the photographs and illustrations
shown in this instruction manual are generic, therefore product fabrics, colour and
design may vary from images shown. CNP Brands reserves the right to alter product
speci cations without notice as a result of our ongoing policy of product improvement.
Contents
Assembly contents list
Assembly / Operating instructions
How to care for your Childcare Toddler Bed
Congratulations on your purchase of the
Childcare Cosi-DL Toddler Bed.
This product has been designed and developed with
safety, comfort and functionality in mind. Please take
the time to read this manual carefully before using
this product and keep it in a safe place for future
reference.

4
x1
x1
x2
x16
x3
x6
Assembly Contents
Check what you have received...
You have received 1 box. Please check the contents of the box against the list below.
If anything is missing, please contact Customer Service. In Australia, contact CNP
Brands on 1300 667 137, in New Zealand contact Wainhouse Distribution on
0800 567 5000.
Headboard
Foot panel
Bedside guards
Bolt/Barrel nuts
Mattress base slat with end holes
Mattress base slats

5
Assembly / Operating Instructions
Assembling mattress base
1. Align and insert the six mattress base slats into the slots in the
bedside guards, ensure you leave the third, middle and seveth
slots free.
2. Insert the three mattress base slats with end holes into the
remaining three slots on the bedside guards.
3. Assemble six bolt/barrel nuts; one set in each end of the three
mattress base slats with end holes, attaching them to the
_____bedside guard.
4. Ensure that the barrel nuts are lined up with the slot parallel to
the bolt hole as shown in the image to the right.
PLEASE NOTE: Do not fully tighten the bolt/barrel nuts.
Mattress base
slats with end
holes.

6
Assembly / Operating Instructions
Attaching headboard
1. Assemble the mattress base to the headboard
with the six bolt/barrel nuts.
2. Ensure that the barrel nuts are lined up with
the slot parallel to the bolt hole as shown in the
image to the right.
PLEASE NOTE: Do not fully tighten the bolt/barrel
nuts.
Attaching foot panel
1. Assemble the mattress base to the foot board
with the four bolt/barrel nuts.
2. Again, ensure that the barrel nuts are lined up
with the slot parallel to the bolt hole.
3. Tighten all bolt/barrel nuts in the toddler bed.

7
How to care for your Childcare Toddler Bed
Cleaning
To ensure the long-lasting use of your toddler bed, wipe down with a damp cloth and use a
mild soap solution if necessary. Do not use abrasive cleaners. Always store product in a clean
dry place.
Maintenance
Always check parts regularly for tightness of screws, nuts and other fasteners - tighten or
replace if required. To maintain the safety of your toddler bed, seek prompt repairs for bent,
torn, worn or broken parts. Use only those parts and accessories approved by CNP Brands.
If you have any dif culties in assembling the stroller, please contact our Service Department.
In Australia, contact CNP Brands on 1300 667 137, in New Zealand contact Wainhouse
Distribution on 0800 567 5000.
Available Accessories (Sold Seperately)
Inner Spring Mattress
White, Model # 115280-011
Trundle Drawer
Walnut, Model # 095005-133
White, Model # 095005-003

8
Distributed in Australia by CNP Brands, 20 Calarco Drive, VIC, 3030
Customer Service 1300 667 137 www.cnpbrands.com.au
Distributed in New Zealand by Wainhouse Distribution, 2-6 Argyle St,
Morningside, PO Box 41-014, St Lukes, Auckland, New Zealand
Customer Service: 0800 567 5000 [email protected]