Childcare MASON 096311 User manual

IMPORTANT:
RETAIN FOR FUTURE REFERENCE,
READ CAREFULLY
MASON
Crib
# 096311

Safety Precautions
Read all instructions before assembly and use of the Crib. Keep instructions
for future use.
FAILURE TO FOLLOWTHESE INSTRUCTIONS COULD RESULT IN SERIOUS
INJURY OR DEATH.
FALL HAZARD
- TO HELP PREVENT FALLS, DO NOT USETHIS PRODUCT WHEN THE
INFANT BEGINS TO PUSH UP ON HANDS AND KNEES OR HAS REACHED
MANUFACTURER’S RECOMMENDED MAXIMUM WEIGHT, OF 8KGS,
WHICHEVER COMES FIRST.
SUFFOCATION HAZARD
INFANTS HAVE SUFFOCATED:
- IN GAPS BETWEEN AN EXTRA PAD AND SIDE OF THE BASSINET/CRADLE.
- ON SOFT BEDDING.
USE ONLY THE PAD PROVIDED BY MANUFACTURER NEVER ADD A PILLOW,
COMFORTER OR ANOTHER MATTRESS FOR PADDING.
TO REDUCE THE RISK OF SUDDEN INFANT DEATH SYNDROME (SIDS),
PAEDIATRICIANS RECOMMEND HEALTHY INFANTS BE PLACED ONTHEIR BACK
TO SLEEP, UNLESS OTHERWISE ADVISED BY YOUR PHYSICIAN.

Safety Precautions
Do not use this product if any part is torn,broken or missing.
If a sheet is used with the mattress pad,use only the one provided by the manufacturer or one
specically designed to t the mattress pad.
Use bassinet with only one child at a time.
Strings can cause strangulation! Do not place items with a string around a child’s neck,such as hood
strings or pacier cords.Do not suspend strings over a bassinet or attach strings to toys.
DO NOT leave child unattended in the crib.
NEVER place crib near a window where cords from curtains can strangle a child.
Remove any tools or excess parts including plastic packaging from the crib vicinity after
its assembly.
Discontinue use of the crib when or before the infant can sit up by themselves.
Padding and cushioning materials,including the mattress are to be sufciently rm to preclude
conforming to the contours of the infants face.
Ensure proper ventilation is maintained in and around the crib by limiting bed clothes,extra pillows or
toys.
Ensure the crib is placed at a reasonable distance from curtains,blinds,heaters,res,power points or
any other hazards.
Promptly replace worn out or broken parts.
CAUTION:
Recommended Mattress (supplied) size is 790mm long x 410mm wide x 30mm in thickness
maximum.It is recommended that the mattress used in this crib be a snug t and not exceed 38mm in
thickness.This is to minimise the risk of a child’s limb becoming caught in the gap.
3

4
Due to variations in the style and design of our products,the photographs and illustrations
shown in this instruction manual are generic, therefore product fabrics, colour and design
may vary from images shown. CNP Brands reserves the right to alter product specications
without notice as a result of our ongoing policy of product improvement.
Contents
Assembly contents list
Assembly / Operating instructions
How to care for your mason crib
Congratulations on your purchase of the mason crib.
This product has been designed and developed with safety,comfort
and functionality in mind.Please take the time to read this manual
carefully before using this product and keep it in a safe place for
future reference.
Congratulations

5
Assembly Contents
Check what you have received...
You have received 1 box.Please check the contents of the box against the list below. If
anything is missing, please contact Customer Service.In Australia, contact CNP Brands on
1300 667 137, in New Zealand contact Wainhouse Distribution on 0800 567 5000.
Supplied loose in box:
Headboard (with childcare badge attached)
Upper curved rail
Mattress board
Mattress pad (with tted sheet)
Allen Key
Foot end
Lower rail
Crib mesh
x1
x4
x1
x1
x1
x1
x2
x1

6
Wooden rail (long)
Bolts 25mm
Wooden rail (short)
x2
x12
x2
Assembly Contents

7
Assembly / Operating Instructions
Attaching upper (curved) top side rail
Attaching lower rail
Attach two upper curved rails
onto one side of the headboard
Attach one lower rail onto one
side of the headboard.
Align & secure with 25mm bolts
having the curve edges facing
inward towards each other
Repeat on otherside
Repeat on otherside
Align and secure with bolt.
1
1
2
3
3
2

8
Assembly / Operating Instructions
Attaching foot end
Flip headboard over as shown on
photo.
Align all dowel on foot end then
secure with six bolts shown on
photo.
1
2

9
Assembly / Operating Instructions
Inserting crib mesh
Insert the crib mesh into the
assembled crib frame. Ensure
the long sides of the crib mesh
correspond with the long sides of
the crib frame.
Slide a long rod through the seam
as shown in image two.
Pull one long side of the crib mesh
through the gaps between the
upper curved rail.
Repeat previous steps for other
long seam and two short seams.
1
3
2
4

10
Assembly / Operating Instructions
Inserting mattress board and mattress pad
Place the mattress board into the
crib.
Press down rmly to ensure the
mattress board is fully inserted.
Insert mattress pad on top of the
mattress board,with the fabric
surface facing upwards.
1
2
3

11
How to care for your Childcare Crib
Cleaning
To ensure the long-lasting use of your crib, wipe down with a damp cloth and use a
mild soap solution if necessary. Do not use abrasive cleaners.Always store product in a
clean dry place.
Maintenance
Always check parts regularly for tightness of screws, nuts and other fasteners – tighten or
replace if required.To maintain the safety of your crib seek prompt repairs for bent, torn,
worn or broken parts. Use only those parts and accessories approved by CNP Brands.
If you have any difculties in assembling the stroller, please contact our Service
Department. In Australia, contact CNP Brands on 1300 667 137, in New Zealand contact
Wainhouse Distribution on 0800 567 5000.

Distributed in Australia by CNP
Brands
20 Calarco Drive,
Derrimut,VIC, 3030
Customer Service 1300 667 137
W: www.cnpbrands.com.au
E: [e-mail]
F: www.facebook.com/CNPBrands
I: @cnp_baby
Distributed in New Zealand by
Wainhouse Distribution
2-6 Argyle St, Morningside,
PO Box 41-014,
St Lukes,Auckland, New Zealand
Customer Service: 0800 567 5000
E: [email protected].nz