Childcare CHARLOTTE 036100 User manual

CHARLOTTE
Bassinet Model # 036100
IMPORTANT:
RETAIN FOR FUTURE REFERENCE, READ CAREFULLY

This bassinet has been designed for an infant having a maximum weight of 8.1kgs.
Always use bassinet with the mattress supplied.
Please follow the assembly instructions in detail to ensure the safety features of the rocking
bassinet are not compromised.
Always attach and fully fasten all fasteners, strings, straps, clamps, screws etc...and check
regularly to ensure they remain correctly tightly attached.
Please remove any tools or excess parts including plastic packaging from the bassinet vicinity after
it’s assembly.
Discontinue use of the bassinet before the infant can sit up by itself.
All padding and cushioning materials, including the mattress are to be sufciently rm to prevent
conforming to the contours of the infants face.
Do not place infant face down on the mattress. Paediatricians recommend healthy infants be
placed on their backs to sleep, unless otherwise directed by a physician.
Ensure the bassinet is placed at a reasonable distance from curtains, blinds, heaters and power
points.
Keep medication, strings, elastic, small toys or small items such as money out of reach from any
position in the bassinet.
Be aware that ribbons or lace associated with bedding may entangle your infant.
Ensure your child is clear of any moving parts when adjusting your bassinet.
This bassinet is only suitable for use with one infant.
Loose strings, ribbons and cords can cause STRANGULATION, never use additional cords,
ribbons or strings that could wrap around an infants neck and become a strangulation hazard.
When in “rocking mode” DO NOT leave infant unattended in the bassinet. Always ensure the
wheels or stand are in the “locked down” position before leaving an infant.
Ensure proper ventilation is maintained in and around the bassinet by limiting bed clothes, extra
pillows or toys.
Read all instructions before assembly and use of the bassinet. Keep
instructions for future use.
Safety Precautions
CAUTION: RECOMMENDED MATTRESS (SUPPLIED) SIZE
IS 420MM WIDE X 820MM LONG X 20-25MM IN THICKNESS
MAXIMUM SIZE. IT IS RECOMMENDED THAT THE MATTRESS
USED IN THIS ROCKING CRADLE BE A SNUG FIT AND NOT
EXCEED 40MM IN THICKNESS.

1
Due to variations in the style and design of our products, the photographs and illustrations
shown in this instruction manual are generic, therefore product fabrics, colour and
design may vary from images shown. CNP Brands reserves the right to alter product
specications without notice as a result of our ongoing policy of product improvement.
Contents
Assembly contents list
Assembly / Operating instructions
How to care for your Childcare Bassinet
Congratulations on your purchase of the
Childcare Charlotte Bassinet.
This product has been designed and developed with
safety, comfort and functionality in mind. Please take
the time to read this manual carefully before using
this product and keep it in a safe place for future
reference.

2
x1
x2
x2
x1
x1
x1
x1
Assembly Contents
Check what you have received...
You have received 1 box. Please check the contents of the box against the list below.
If anything is missing, please contact Customer Service. In Australia, contact CNP
Brands on 1300 667 137, in New Zealand contact Wainhouse Distribution on
0800 567 5000.
Supplied loose in box:
Main frame (DO NOT REMOVE FOAM)
Base frame (with retractable castors)
Leg frame
Mattress support board
Bassinet liner (with reversible top skirt)
Mattress pad (with tted sheet)
Bottom shelf

3
x2
x1
x2
x4
x4
Assembly Contents
Support rod
Canopy with soft toy
26mm screw & lock nut
40mm screw and lock nut
40mm screw
Tools required
Phillips head screw driver
Spanner

4
Assembly / Operating Instructions
PLEASE NOTE: The assembly of this bassinet may required two
people.
1. Insert one leg frame downwards through two of the corner
loops on the bottom shelf. Ensure the dividers of the shelf are
facing upwards.
2. Repeat for other leg frame.
1. Fit the assembled leg frames and
____bottom shelf into the corresponding
_____slots located on one of the base
_____frames.
2. Repeat for other base frame.
3. Slide the two support rods through the bottom shelf fabric
____tunnels located on the two longer sides of the bottom shelf.
4. In one corner of the assembled frame, grasp one support rod
_____end, pull down and push up into the slot located on the base
_____frame mould.
5. Repeat for remaining corners of the assembled frame.
__
1. 2.
Inserting leg frames
Attaching base frame

5
Assembly / Operating Instructions
6. In all four corners of the assembled frame, ensure that the holes
_____on the base frame moulds, the leg frames and the support rods
_____are aligned. Insert a 40mm screw through the aligned holes to
_____secure.
7. Lift assembled frame to ensure all screws are inserted and
_____secured properly.
1. Place the main frame on top of the assembly as shown in
image.
2. Align the holes in the main frame to the corresponding holes on
the leg frame in each four corners.
3. Insert four 40mm screws through the holes, secure with four
corresponding lock nuts. Ensure the rounded side of the lock
nut is facing down. Secure using a Phillips head screw driver
and spanner.
Attaching main frame

6
Assembly / Operating Instructions
Inserting mattress support board
Attaching bassinet liner with reversible top skirt
1. Place the mattress support board, so that the two holes in the
mattress support board align with the two holes in the main
frame.
2. Insert two 26mm screws through the holes, secure with two
_____corresponding lock nuts. Ensure the rounded side of the lock
_____nut is facing down. Secure using a Phillips head screw driver
____ and spanner.
1. Place the bassinet liner onto the main frame. Ensure the
ribboned bow is centred at one end of the bassinet.
2. Lift the bottom skirt of the bassinet liner into the bassinet and
_____attach the twelve press studs around the top of the main frame.

7
Assembly / Operating Instructions
Inserting mattress pad
1. Insert the mattress pad into the bassinet on top of the bassinet
liner.
3. Stretch the pockets on the bottom of the bassinet liner around
_____the ends of the mattress support board.
4. Attach four press studs on the bottom of the bassinet liner to
_____the bottom of the mattress support board.

8
Assembly / Operating Instructions
Attaching canopy
Stationary mode
1. Position the canopy over the top end of the bassinet (the
warning label end).
2. Push the canopy ratchets onto the frame on both sides of the
bassinet. Ensure canopy ratchets are attached through the slots
in the bassinet liner and there is no foam restricting them.
3. Attach the press studs on each canopy aps to the sides of the
bassinet liner.
4. Attach the velcro on the rear of canopy edge to the velcro strip
on the rear outer edge of bassinet top rail liner.
1. To convert bassinet to stationary mode; turn the dial on the
castor’s mould clockwise and wheel will lower down.
2. Repeat step 1 for remaining wheels.