Childcare Hudson 091950-003 User manual

IMPORTANT:
RETAIN FOR FUTURE REFERENCE,
READ CAREFULLY
Hudson
Toddler Bed “White”
#091950-003

2
Read all instructions before assembly and use of the Toddler Bed.Keep
instructions for future use.
THIS PRODUCT CONTAINS SMALL PARTS WHICH ARE FOR ADULT ASSEMBLY ONLY.
AS SMALL PARTS ARE INVOLVED IN ASSEMBLY,CHILDREN SHOULD BE KEPT CLEAR OFTHE
ASSEMBLY AREA.
IDENTIFY ALL PART AND COMPONENTS,CLEAR AN AREA ON THE FLOOR FOR ASSEMBLY AND
PLACE A SHEET ONTHE FLOORTO ENSURETHETODDLER BED WILL NOT BE SCRATCHED
DURING ASSEMBLY.
DISPOSE OF ALL PACKAGING MATERIAL IMMEDIATELY AFTERTHETODDLER BED IS
ASSEMBLED.
FAILURETO FOLLOWTHESE WARNINGS ANDTHE ASSEMBLY INSTRUCTIONS COULD RESULT
IN SERIOUS INJURY OR DEATH FROM STRANGULATION.
DO NOT PLACE BED NEAR WINDOW WHERE CORDS FORM BLINDS OR DRAPES MAY
STRANGLE A CHILD.
SAFETY PRECAUTIONS
WARNING
Suitable for children from 15 months up to a maximum weight of 22.7kgs.
ENSURE the toddler bed is placed at a reasonable distance from curtains,blinds, heaters and power points.
ENSURE the toddler bed is completely assembled and check that all parts are securely tightened before placing
the child into the toddler bed.
ENSURE medication,string,elastic,small toys or small items such as money etc.are always kept out of the
childs reach when in the toddler bed.
DO NOT place items with string,cord or ribbon around a childs neck such as hood strings or pacier cords.
DO NOT suspend strings over toddler bed for any reason.
DO NOT over tighten bolts.
ENSURE that the child is clear of any moving parts when adjusting the toddler bed.
Retain your sales receipt to provide proof of purchase.
RECOMMENDED MATTRESS SIZE (SOLD SEPERATELY)
THIS TODDLER BED HAS BEEN MANUFACTURED FOR USE WITH A MATTRESS WHICH MEASURES 690 mm WIDE
BY 1300 mm LONG AND 100 mm -150 mm IN THICKNESS.The width and length are specied because it is
important that the gaps between the mattress and the sides and ends of the toddler bed will not exceed 40mm.
this is to minimise the risk of a child’s limb being caught in the gap.

3
Due to variations in the style and design of our products, the photographs and illustrations shown in this
instruction manual are generic,therefore product fabrics,colour and design may vary from images shown.
CNP Brands reserves the right to alter product specications without notice as a result of our ongoing
policy of product improvement.
SAFETY PRECAUTIONS / CONGRATULATIONS
Contents
Assembly contents list
Assembly / Operating instructions
How to care for your Childcare Hudson Toddler Bed
Congratulations on your purchase of the Childcare
Hudson Toddler Bed.
This product has been designed and developed with safety,
comfort and functionality in mind. Please take the time to read
this manual carefully before using this product and keep it in a
safe place for future reference.

4
ASSEMBLY CONTENTS
Check what you have received...
You have received 1 box. Please check the contents of the
box against the list below. If anything is missing, please contact
Customer Service.
InAustralia,contact CNP Brands on 1300 667 137,in New Zealand
contact Wainhouse Distribution on 0800 567 5000.
Supplied loose in box:
Headboard Panel x 1
x 1
x 2
x 2
x 1
x 2
Safety Guard
Panels
Bedrail
Middle Base Slat
(with 2 holes)
Base Slats
(with 1 hole)
Footboard Panel
x 6
Base Slats
x 2
Base Support
Panels

5
Bolts 60mm x 12
x 4
x 2
x 4
x 8
x 8
Dowels
Barrel Nuts 13mm
Barrel Nuts 10mm
Bolts 50mm
Bolts 30mm
x 1Allen Key
ASSEMBLY / OPERATING INSTRUCTIONS
Recommended use with 115282-003 Inner Spring Mattress - White.

6
ASSEMBLY / OPERATING INSTRUCTIONS
Headboard Side...
2
3
4
5
Insert x2 60mm Bolt with Barrel Nuts as seen on
picture & tighten both bottom bolts with Allen key,
barrel nuts will need to be aligned for bolts to t.
Insert 30mm Bolt on Headboard top side & tighten.
Place x4 Base Slats into Safety Guard Panel & x
them into holes.
Base Slats with hole is to be inserted in second slot
from headboard and tighten on both side with x2
50mm Bolt barrel nuts need to be centred into base
slat aligning holes to t.
2a.
3a.
4a.
5a.
1Align Headboard to Safety Guard Panel.1a.
MATTRESS BASE ‘THIS SIDE UP’ LABEL MUST BE FACING UPWARD WHEN
MATTRESS BASE IS INSTALLED
WARNING

7
Headboard Side continued...
ASSEMBLY / OPERATING INSTRUCTIONS
Foot Panel Side...
1
2
Align Footboard Panel with Bedrail.
Insert x2 60mm Bolt with Barrel Nuts & tighten with
allen key, barrel nuts will need to be aligned for bolts
to t.
1a.
2a.
6Line up second Safety Guard Panel & tighten bolt
same as gure 1.1 and 1.2,Barrel Nuts will need to
be aligned for bolts to t.
6a.
3Base Slats with hole is to be inserted in second
slot from Footboard Panel and tighten on both
side with x2 50mm Bolt Barrel Nuts need to be
centred into base slat aligning holes to t.
3a.

8
ASSEMBLY / OPERATING INSTRUCTIONS
Foot Panel Side continued...
6Barrel Nuts will need to be aligned for Bolts to t.6a.
4
5
Place x4 Base Slats into Bedrail & x them into
holes.
Line up second Bedrail & insert into other side of
hole,tighten with x2 60mm Bolts.
4a.
5a.

9
ASSEMBLY / OPERATING INSTRUCTIONS
Assembly of the Headboard & Foot Panels...
1
2
3
4
5
Align both Headboard & Foot Panel & insert
Middle Base Slat with hole into the middle of
toddler bed.
Ensure Dowels and dowel holes align correctly.
Insert all four Dowels into the dowel holes at the
end of the Headboard section.
Place Base Support Foot onto the side of slat &
tighten on both side with x4 60mm Bolt,barrel
nuts need to be centered into middle slats
aligning holes to t.
Repeat on other side.
Photo of nished product.
2a.
2b.
1a.
3a.
4a.
5a.

10
HOW TO CARE FOR YOUR CHILDCARE TODDLER BED
Cleaning
Maintenance
This product has been designed and developed with safety, comfort and
functionality in mind. Please take the time to read this manual carefully
before using this product and keep it in a safe place for future reference.
To ensure the long-lasting use of your Toddler Bed, wipe down with a
damp cloth and use a mild soap solution if necessary.Do not use abrasive
cleaners.Always store product in a clean dry place.
Always check parts regularly for tightness of screws, nuts and other
fasteners – tighten or replace if required.To maintain the safety of your cot,
seek prompt repairs for bent, torn, worn or broken parts. Use only those
parts and accessories approved by CNP Brands.
If you have any difculties in assembling the Toddler Bed, please contact
our Service Department.
In Australia, contact CNP Brands on 1300 667 137, in New Zealand
contact Wainhouse Distribution on 0800 567 5000.

11
About CNP Brands
Currently,CNP Brands boasts one of the most diverse brand portfolios
with a combination of company owned brands and distribution
agreements.These include distribution lines for Eveno, Good Baby,
Lascal, Maclaren, Project Nursery, Summer Infant and Yookidoo.
Our own brands, including Childcare, have gone from strength to
strength in recent years. Childcare, and our premium brand bebe
care, demonstrate our commitment to quality and continuing
investment in product development.
ABOUT US

Distributed in Australia by CNP Brands
82 Maribyrnong Street, Footscray,VIC, 3011
Customer Service 1300 667 137
W: www.cnpbrands.com.au
E: [e-mail]
F: www.facebook.com/CNPBrands
I: @cnp_baby
Distributed in New Zealand by Wainhouse
Distribution
2-6 Argyle St, Morningside,
PO Box 41-014,
St Lukes,Auckland, New Zealand
Customer Service: 0800 567 5000
E: [e-mail]