Cineroid L10C-VCe User manual

English
User’s Manual
Variable & Portable LED LIGHT
L10C-VCe
Variable Color Temperature
High Power LED Light Source
Dimming Brightness 30 steps
Attachable Battery
Connecting External Power
Support for variety Accessories

Cineroid L10C-VCe
VARIABLE & PORTABLE LED LIGHT
English
Cineroid L10C-VCe
VARIABLE & PORTABLE LED LIGHT
Thank you for purchasing the Cineroid LED light.
The Cineroid LED employs a very high color rendering index (CRI).
It displays a very stable color temperature and brightness so that both motion pictures and still
images can be taken in their most natural color tones.
Please read this user manual thoroughly before using the Cineroid LED.
Test Before Operating
It is recommended to test the Cineroid LED before use. Make sure the light comes on when
powered and that the brightness control works properly.
Copyrights and Prohibitions
The use of images of people, property, and places can without permission can be prohibited by
law. Please refer to your region’s laws regarding copyrights.
Safety Precautions
◎Do not use any batteries, power cord, or accessories that are not specied in this
document.
◎When using a power cord, be sure to plug it in completely. Do not handle power plugs
when your hands are wet. When unplugging the power cord, grasp the plug body
or adapter instead of the cord.
◎Power cords that are scratched, heavily bent or twisted can potentially be hazardous and
a source of electric shock and/or re.
◎Do not insert foreign objects into the product’s electric or cable components.
◎Do not place the power cord near sources of heat as this may melt or cause damage to
the cord potentially causing re or electric shock.
◎Do not disassemble or modify the product. This may damage the product and cause
danger due to a malfunction.
◎Please keep the product out of reach of young children. Injuries may occur due to damage
to the product.
◎When using the product in an airplane or hospital setting, it is recommended to acquire
authorization rst as signals or electro-magnetic waves from the product may cause other
equipment to malfunction.
◎Do not store the product in a dusty or humid environment as damage may occur.
◎When the product is mounted on a camera, do not lift or move the camera by grabbing
the product. This may cause damage to the product or the camera mount.
◎Do not clean the product with paint thinner, benzene, or other volatile solvents. It may
cause damage to the product and become a re hazard.
◎This product is not waterproof. If the product is dropped in water, contact the service
center immediately.
Please observe the following safety precautions as they are meant for the safe and
proper use of the product to reduce the risk of accidents. Upon reading the user
manual, keep it in a safe and available place.
02 03
○Canon and EOS are registered trademarks of Canon.
○Nikon is a registered trademark of Nikon.
○Sony is a registered trademark of Sony.
○Panasonic is a registered trademark of Panasonic.

Cineroid L10C-VCe
VARIABLE & PORTABLE LED LIGHT
English
Cineroid L10C-VCe
VARIABLE & PORTABLE LED LIGHT
04 05
Table of Contents
Safety Precautions
Table of Contents
Components
Parts
Installing the Battery
Powering On/O
Adjusting Brightness
Mounting the honey comb
Changing Color Temperature
Setting Channels
Connecting External Power
Product Specication
Optional Products
03
04
05
06
07
07
08
08
09
09
10
11
Components
Please ensure all parts are present after opening the box.
B. Honey Comb
C. Battery Mount
A. L10C-VCe Body
D. Mini Ball Head
E. User's Manual
e
09

Cineroid L10C-VCe
VARIABLE & PORTABLE LED LIGHT
English
Cineroid L10C-VCe
VARIABLE & PORTABLE LED LIGHT
Parts
Installing the Battery
06 07
Magnet
Dimmer
Display
Color change /
Channel Setting Buttons
Power ON/OFF DC in
LED
IR Sensor
IR Sensor
Power cable
Screw
1/4" Screw mount
Powering On/O
1. Attach the battery mount to the back of the body with the use of the two screws on the mount.
2. Connect the cable on the battery mount to the body.
3. Attach the battery to the battery mount.
4. Be sure to charge fully the battery before installing.
5. Sony NPF Type battery is compatible.
1 3
123
1. Push the power switch “ON”to turn on the LED light.
2. Check if the information is displayed properly.
3. Push the power switch "OFF”to turn o the LED light.

Cineroid L10C-VCe
VARIABLE & PORTABLE LED LIGHT
English
Cineroid L10C-VCe
VARIABLE & PORTABLE LED LIGHT
08 09
Adjusting Brightness
Mounting the honey comb
1. Turn the brightness dial side to side to adjust the brightness.
2. The brightness range is from 0~30 and the current level is displayed on LCD.
3. Turning the dial to the right increases brightness.
4. Turning the dial to the left decreases brightness.
5. When brightness value is zero, LED lights become o.
12
1. Mounting the honey comb will prevent the light from spreading to the sides.
Changing color temperature
1. The L10C-VCe can be changed color temperature by up / down button.
2. LCD displays color temperature value from 27 to 65.
3. The highest value on the LCD is 25 that represents daylight and 65 is tungsten.
21
Daylight
Tungsten 27(LCD Value)
The lowest color temperature
6500˚K
2700˚K
65(LCD Value)
The highest color temperature
Connecting External Power
1. In addition to the rechargeable battery, external power sources can also be used to power the light.
2. 12V, 2A power is recommended for external power.
3. Remove the battery mount plug from the body.
4. Insert the power plug from the external power source.
DC in
6~17 V

Cineroid L10C-VCe
VARIABLE & PORTABLE LED LIGHT
English
Cineroid L10C-VCe
VARIABLE & PORTABLE LED LIGHT
10 11
Optional Products
L10C-VCe Specication
CC01 Clear Cover
LD11
BD01 Barn Door
HG-01 Hand Grip
FCB044 DC plug only
FCB043 DC plug with D-tap
Model Form Remarks
Diffuser Set
Size
Power input
Light angle
Brightness step
Mount
External power
Weight
Display info.
Photometric
Color Temp.
Power drain
93 x 83 x 25m
6 ~17V
120 degree
30 steps
1/4” Screw mount
D-tap cable(optional)
160 g (without Battery)
Brightness, Channel, Color Temp., Error warning
420 Lux / 1m
6500
o
K ±200
o
K2700
o
K~
18 W
PHOTOMETRIC PHYSICAL DATA
Photometric tests conducted using Cineroid measurement system.
All measured lumens data is shown for rated input voltage.
-90 90
60
30
0
-30
-60 200 Lux
200 Lux
380 Lux
380 Lux
420 Lux
(Lux / 1m) 300 400 500 600 700 800
0.0
0.5
1.0
4700~8200K
3700~4700K
2600~3700K
Relative Emission Intensity
Wavelength [nm]
L10C-VCe

Customer Support Center
Seculine Co., LTD.
Tel [phone] / Fax [phone]
SECULINE CO., Ltd.
Room.510, 55 (Kolon Science Vally #2), Digital-ro 34-gil, Guro-gu, Seoul, KOREA 08378
Homepage www.cineroid.com
E-mail [email protected]
Printed in Korea
L10CVCe 1.5
Variable & Portable LED LIGHT
L10C-VCe