Citizen CZ-01 User manual

©2019 CITIZEN SYSTEMS JAPAN CO.,LTD.
User Guide
Version 1.0.0
DIGITAL PHOTO PRINTER
CZ-01

2
WARNING
Warning on power connection
For the Customers in Europe
For kundene i Norge

For the Customer in USA
For the customers in Canada
For the Customers in Oceania
Türkçe
For the customers in Thai

Safety precautions
Remodeling
Copyright
CITIZEN SYSTEMS EUROPE GmbH
Germany (Stuttgart Office)
Otto-Hirsch-Brucken 17
70329 Stuttgart, Germany
Tel [phone]
Fax [phone]
U.K. (London Office)
Elizabeth House, 56-60 London Road
Staines-Upon-Thames, TW18 4HF United
Kingdom
Tel [phone]
Fax [phone]
6-1-12 Tanashi-cho, Nishi-Tokyo-Shi, Tokyo 188-8511
Tel : [phone]
Fax: [phone]
CITIZEN SYSTEMS JAPAN CO.,LTD.
CITIZEN SYSTEMS AMERICA CORPORATION
363 Van Ness Way, Suite 404
Torrance, CA 90501 USA
Tel [phone]
Fax [phone]

Table of Contents
Introduction ..................................................................................................... 7
For Safe Operation .......................................................................................... 7
Caution for installation ................................................................................. 10
Printer Installation ........................................................................................ 11
11
12
21
22
Troubleshooting ............................................................................................ 23
Cleaning ......................................................................................................... 28
28
Repacking ...................................................................................................... 30
................................................................................................ 31

Warnings and Cautions
Warning
Caution
Symbols
Introduction
For Safe Operation

8
Warning

Caution

Caution for installation

11
Printer Installation
Caution
Checking the contents
*

12
Paper
output
Trash box
Top door
Opening lever
LEDs
Vent Vent
Vent
Fan
USB
5.0 V DC, 2.0 A
Power
inlet
OFF
ON
Caution
Name of components

USB
5.0 V DC, 2.0 A
Power
inlet
OFF
ON
1 Make sure that the ON/OFF switch of the printer unit is set to OFF.
2 Make sure that the power switch of the computer is set to OFF.
3 Plug the connector of the power cord (supplied) into the printer power inlet.
4 Plug the power cord into an outlet.
5 Connect the printer unit’s USB B connector and the computer with a USB cable.
6 Set the ON/OFF switch of the printer unit and the power switch of the computer
to ON.
Caution
Connecting the power cord and a computer

Caution
Media (ribbon, paper)
Removing the spacers
1 2 3
Spacer
Size Paper Ribbon
Caution

Setting the media (ribbon, paper)
Top door
Opening lever
Ribbon
1 Pull the opening lever toward you to open the printer unit’s top door.
Caution
Caution
Take-up side
Supply side
Rotate in the direction of the arrow
to take up the slack.
2 Set the new ribbon.
Top door

3 Install the ribbon to the printer unit.
New ribbon
Align with the groove
and then set in place
Trash box
5 Remove the printer unit’s trash box.
Caution
4 Close the printer unit’s top door.

7 Remove the old paper roll from the paper holder, and then set the new paper roll
ensuring there are no gaps.
Set the roll so that
there are no gaps.
Set the paper so that
it does not protrude
from the roll.
Caution
Paper holder
6 Remove the paper holder from the printer.
Caution

18
Caution
8 Set the paper holder into the printer.
9 Remove the seal, place a hand on the
paper, and rotate the paper holder in the
direction of the arrow to insert the paper
leading edge until the buzzer beeps.
10 Attach the printer unit’s trash box.
LEDs
Trash
box
LEDs

Caution

Insert the tray horizontally.
1 Insert the paper tray into the attachment
parts on the sides of the printer unit’s
paper output port.
2 Lower the paper tray to set it.
Paper tray installation
Caution