Clarion NX316AU User manual

NX316AU
Owner’s Manual
DVD Multimedia Station With In-built Navigation and
6.2” Touch Panel Control

2 NX316AU
English
Owner’s Manual
1. FEATURES ............................................................................................................................................................5
Expanding Systems ...............................................................................................................................................5
2. PRECAUTIONS.....................................................................................................................................................6
3. CAUTIONS ON HANDLING..................................................................................................................................7
4. PANEL CONTROLS ..............................................................................................................................................9
Functions of Buttons ..............................................................................................................................................9
5. REMOTE CONTROL...........................................................................................................................................10
Remote Control Functions ...................................................................................................................................11
6. BASIC OPERATIONS .........................................................................................................................................12
Turning on/off the power ......................................................................................................................................12
Switching Source Modes .....................................................................................................................................12
Home Screen .......................................................................................................................................................12
Clock and Indicators Display ...............................................................................................................................12
Turning off the Display Monitor ............................................................................................................................12
Adjusting the Volume ...........................................................................................................................................12
Screen Adjustment...............................................................................................................................................13
Mute Function ......................................................................................................................................................13
Radio Illumination ................................................................................................................................................13
Parking Brake Safety ...........................................................................................................................................13
Video Output ........................................................................................................................................................13
Reverse Camera View .........................................................................................................................................13
7. RADIO MODE OPERATIONS .............................................................................................................................14
Listening to the Radio ..........................................................................................................................................14
Seek Tuning .........................................................................................................................................................14
TP Seek ...............................................................................................................................................................14
Manual Tuning .....................................................................................................................................................14
Autostore .............................................................................................................................................................14
Storing Preset Memory ........................................................................................................................................15
Recalling a Preset Station ...................................................................................................................................15
8. RDS OPERATIONS .............................................................................................................................................15
RDS (Radio Data System) ...................................................................................................................................15
TA (Trafc Announcement) ..................................................................................................................................16
Emergency Broadcast .........................................................................................................................................16
PTY (Programme Type) .......................................................................................................................................16
Volume Setting of TA, Emergency Broadcast, and PTY ......................................................................................17
AF (Alternate Frequency) Function......................................................................................................................17
REG (Regional Programme)................................................................................................................................17
9. CD/USB MODE OPERATION .............................................................................................................................18
Discs ....................................................................................................................................................................18
Watching/Listening to a disc ................................................................................................................................19
Loading a CD .......................................................................................................................................................19
Eject the CD.........................................................................................................................................................19
USB .....................................................................................................................................................................19
USB Digital Media Streaming ..............................................................................................................................19
Hot plugging function ...........................................................................................................................................19
Connecting a USB memory/MTP device .............................................................................................................20
Watching/Listening to a track with USB memory device .....................................................................................20
Unplug the USB memory/MTP device .................................................................................................................20
Contents

NX316AU 3
English
English
Owner’s Manual
Contents
10. DVD VIDEO PLAYER OPERATIONS .................................................................................................................21
Showing DVD video mode screen .......................................................................................................................21
Playing Video Files in DVD ..................................................................................................................................21
Play/Pause Playback ...........................................................................................................................................21
Skip (Search) a Chapter ......................................................................................................................................21
Skip (Search) a Title ............................................................................................................................................21
Fast Forward/Fast Backward Operation ..............................................................................................................21
Repeat Playback..................................................................................................................................................21
Switching Audio ...................................................................................................................................................22
Switching Subtitles...............................................................................................................................................22
Switching Angle ...................................................................................................................................................22
Zoom Operation ...................................................................................................................................................22
11. CD/USB VIDEO OPERATIONS ..........................................................................................................................23
Playing Video Files in CD/USB memory/MTP device ..........................................................................................23
Play/Pause...........................................................................................................................................................23
Switch to Previous/Next File ................................................................................................................................23
Fast Forward/Fast Backward Operation ..............................................................................................................23
Repeat Playback..................................................................................................................................................23
Switching Subtitles...............................................................................................................................................23
Video File List (Directory) ....................................................................................................................................23
Zoom Operation ...................................................................................................................................................23
12. CD/USB/MTP AUDIO OPERATIONS .................................................................................................................24
Playing Audio Files in CD/USB memory/MTP device ..........................................................................................24
Play/Pause Playback ...........................................................................................................................................24
Switch to Previous/Next File or track ...................................................................................................................24
Fast Forward/Fast Backward Operation ..............................................................................................................24
Repeat Playback..................................................................................................................................................24
Random Playback................................................................................................................................................24
Album Artwork......................................................................................................................................................24
Selecting a Track on the Directory View ..............................................................................................................25
Tag Display Function ...........................................................................................................................................25
13. CD/USB/MTP PICTURE OPERATIONS .............................................................................................................26
Showing CD/USB/MTP Picture Mode Screen .....................................................................................................26
Play/Pause Playback ...........................................................................................................................................26
Switch to Previous/Next File or track ...................................................................................................................26
Repeat Playback..................................................................................................................................................26
Rotate Operation .................................................................................................................................................26
Effect Operation ...................................................................................................................................................26
14. iPod/iPhone OPERATIONS ...............................................................................................................................27
Select iPod Mode.................................................................................................................................................27
Play/Pause Playback ...........................................................................................................................................27
Switch to Previous/Next Track .............................................................................................................................27
Fast Forward/Backward .......................................................................................................................................27
Tag Display Function ...........................................................................................................................................27
Repeat Play .........................................................................................................................................................27
Shufe Play..........................................................................................................................................................27
Selecting a Song from iPod Menu .......................................................................................................................28
Available iPod Categories ....................................................................................................................................28
Supported iPod/iPhone Devices ..........................................................................................................................28

4 NX316AU
English
Owner’s Manual
15. Bluetooth® AUDIO PLAYER OPERATIONS.....................................................................................................29
Select Bluetooth Audio Mode ..............................................................................................................................29
Controlling the Bluetooth Audio Player ................................................................................................................29
Playing Music.......................................................................................................................................................29
Play/Pause Playback ...........................................................................................................................................29
Switch to Previous/Next Track .............................................................................................................................29
Fast Forward/Backward .......................................................................................................................................29
Tag Display Function ...........................................................................................................................................29
16. Bluetooth® TELEPHONE OPERATIONS ..........................................................................................................30
Introduction to Bluetooth® Technology ................................................................................................................30
Incoming Call .......................................................................................................................................................30
Select Phone Mode .............................................................................................................................................30
Voice Dialer..........................................................................................................................................................30
Key Input..............................................................................................................................................................31
Phonebook...........................................................................................................................................................31
History..................................................................................................................................................................32
Bluetooth Settings................................................................................................................................................33
Pairing with an External Device ...........................................................................................................................33
Cancelling Pairing Mode ......................................................................................................................................33
Connecting to a Bluetooth Device .......................................................................................................................33
Disconnecting a Bluetooth Device .......................................................................................................................34
Deleting a Bluetooth Device ................................................................................................................................34
Reset Bluetooth Information ................................................................................................................................34
17. AUX OPERATIONS .............................................................................................................................................35
18. VIDEO INPUT/DVB-T2 OPERATIONS ...............................................................................................................35
19. GPS NAVIGATION OPERATIONS......................................................................................................................35
20. SETTINGS OPERATIONS ..................................................................................................................................36
Select Settings .....................................................................................................................................................36
Balance/Fader Adjustment...................................................................................................................................36
Time Alignment Adjustment .................................................................................................................................36
Sound Effect Controls ..........................................................................................................................................37
Subwoofer Controls .............................................................................................................................................37
Graphic Equalizer ................................................................................................................................................37
Clock Adjustment .................................................................................................................................................38
General Settings ..................................................................................................................................................38
About ...................................................................................................................................................................39
21. TROUBLESHOOTING ........................................................................................................................................40
22. ERROR DISPLAY ...............................................................................................................................................44
23. SPECIFICATIONS ...............................................................................................................................................45
Contents

NX316AU 5
English
English
Owner’s Manual
Expanding Systems
1. FEATURES
Note:
The items listed outside of the unit are the commercial products generally sold.
Double Din 6.2” Touch Panel Control
DVD Video/CD-DA/MP3/WMA/AAC Playback Capability
Programmable Steering Wheel Remote Control
Compatible with iPodTM/iPhoneTM via USB
Audio/Picture/Video Playback Capability via USB
memory/ MTP device
Built in Bluetooth® Handsfree (HFP) , Audio Streaming
(A2DP & AVRCP), and Phonebook (PBAP)
External Digital Video Broadcast – Terrestrial 2 (DVB-T2)
support
Front panel Auxiliary Input and 4ch RCA output with
Subwoofer Control
Mobile phone via
USB (MTP)
USB flash memoryHandsfree/Audio
Streaming via Bluetooth
CD/DVDiPod/iPhone
Rooftop monitor Reverse camera DVB T-2 receiver
not available in all countries
Expandable Audio/Visual Features (SOLD SEPARATELY)
Programmable steering
remote control
Control Features
AAC MPG

6 NX316AU
English
Owner’s Manual
For your safety, the driver should not watch any video
sources and/or operate the controls while driving. Please
note that watching and operating any video sources while
driving is prohibited by law in some countries. Also, while
driving, keep the volume to a level at which external
sounds can be heard.
Do not disassemble or modify this unit. It may cause an
accident, re, or electric shock.
Do not use this unit when a trouble exists, such as no
screen content appears or no sound is audible. It may
cause an accident, re, or electric shock. For that case,
consult your authorized dealer or a nearest Clarion ser-
vice center.
In case of a problem, such as any material has entered
in the unit, the unit gets wet, or smoke or strange smells
come out of the unit, etc., stop using this unit immediately,
and consult your authorized dealer or a nearest Clarion
service center.
Using it in that condition may cause an accident re, or
electric shock.
Use a fuse with the same specication only when replac-
ing the fuse.
Using a fuse with a different specication may causes a
re.
For the installation of this unit or a change in the installa-
tion, ask your authorized dealer or a nearest Clarion ser-
vice center for safety. Professional skills and experience
are requires to do so.
As the driver, you alone are responsible for your driving
safety.
In order to avoid a trafc accident, do not operate the sys-
tem while driving.
In order to avoid a trafc accident, operate the system
only when the vehicle is stopped at a safe place and the
parking brake is on.
The software may contain inaccurate or incomplete infor-
mation due to the passage of time, changing circumstanc-
es, and the sources of information used. Please respect
current trafc conditions and regulations at all times while
driving.
Keep the amount of time spent viewing the screen while
driving to a strict minimum.
When the inside of the car is very cold and the player
is used soon after switching on the heater, moisture may
form on the disc (DVD/ CD) or the optical parts of the play-
er and proper playback may not be possible. If moisture
forms on the disc (DVD/CD), wipe it off with a soft cloth.
If moisture forms on the optical parts of the player, do not
use the player for about one hour. The condensation will
disappear naturally allowing normal operation.
Driving on extremely bumpy roads which cause severe
vibration may cause the sound to skip.
This unit uses a precision mechanism. Even in the event
that trouble arises, never open the case, disassemble the
unit, or lubricate the rotating parts.
This navigation system should not be used to replace
your own judgment. No itinerary suggested by this navi-
gation system should ever override any highway regula-
tions, your own judgment, or a knowledge of safe driving
practice. Do not follow the navigation system’s suggested
itinerary if it would cause you to perform a dangerous or
illegal act, place you in a dangerous situation, or take you
into an area you consider unsafe.
The advice provided by the navigation system is to be re-
garded as a suggestion only. There may be times when
the navigation system displays the vehicle’s location
incorrectly, fails to suggest the shortest route, or fails to
direct you to your desired destination. In such instances,
rely on your own driving judgment, taking into account the
driving conditions at the time.
Do not use the navigation system to locate emergency
services. The database does not contain a complete list-
ing of emergency services. Please show discretion and
ask for directions in such instances.
The navigation system does not provide, nor represent in
any way information on: trafc and highway regulations;
technical aspects of the vehicle weight, height, width,
load and speed limits; road conditions including grade,
percentage of incline and surface conditions; obstacles
such as the height and width of bridges and tunnels; and
other current driving or road conditions. Always rely on
your own judgment when driving a car, taking into account
current driving conditions.
2. PRECAUTIONS
WARNING

NX316AU 7
English
English
Owner’s Manual
The operation panel will operate properly in a temperature
range of 0˚ to 60˚ C.
Do not allow any liquids on the set from drinks, umbrellas
etc. Doing so may damage the internal circuitry.
Do not disassemble or modify the set in any way. Doing so
may result in damage.
Subjecting the operation panel to shocks may result in
breakage, deformation or other damage.
Do not let cigarettes burn the display.
If a problem should occur, have the set inspected at your
store of purchase.
The remote control unit may not work if the remote control
sensor is exposed to direct sunlight.
In extremely cold weather, the display movement may
slow down and the display may darken, but this is not a
malfunction. The display will work normally when the tem-
perature increases.
Small black and shiny spots inside the liquid crystal panel
are normal for LCD products.
The USB memory sticks must be recognized as “USB
mass storage class” to work properly. Some models may
not operate correctly.
When the memorized data is lost or damaged by any
chance, Clarion shall not be liable for any damage.
When using an USB memory stick, we recommend that
you backup your data stored on it before by using a per-
sonal computer etc.
Data les may be broken when using USB memory sticks
in the following situation: When disconnecting the USB
memory stick or turning the power off during writing or
reading data. When affected by static electricity or electric
noise. Connect/disconnect the USB memory stick when it
is not accessed.
Connecting with the computer is not covered.
Cleaning the cabinet
Use a soft, dry cloth and gently wipe off the dirt. For tough
dirt, apply some neutral detergent diluted in water to a soft
cloth, wipe off the dirt gently, and then wipe again with a
dry cloth.
Do not use benzene, thinner, car cleaner, etc., as these
substances may damage the cabinet or cause the paint
to peel. Also, leaving rubber or plastic products in contact
with the cabinet for long periods of time may cause stains.
Cleaning the liquid crystal panel
The liquid crystal panel tends to collect dust, so wipe it
off occasionally with a soft cloth. The surface is easily
scratched, so do not rub it with hard objects.
3. CAUTIONS ON HANDLING
Operation Panel
USB Port
Cleaning
For a longer service life, be sure to read the following cautions.

8 NX316AU
English
Owner’s Manual
Handling
New discs may have some roughness around the edges.
If such discs are used, the player may not work or the
sound may skip. Use a ball-point pen or the like to remove
any roughness from the edge of the disc.
Never stick labels on the surface of the disc or mark the
surface with a pencil or pen.
Never play a disc with any cellophane tape or other glue
on it or with peeling off marks. If you try to play such a
disc, you may not be able to get it back out of the DVD
player or it may damage the DVD player.
Do not use discs that have large scratches, cracked, etc.
Use of such discs may cause missoperation or damage.
To remove a disc from its storage case, press down on the
center of the case and lift the disc out, holding it carefully
by the edges.
Do not use commercially available disc protection sheets
or discs equipped with stabilizers, etc. These may dam-
age the disc or cause breakdown of the internal mecha-
nism.
Storage
Do not expose discs to direct sunlight or any heat source.
Do not expose discs to excess humidity or dust.
Do not expose discs to direct heat from heaters.
Cleaning
To remove ngermarks and dust, use a soft cloth and wipe
in a straight line from the center of the disc to the circum-
ference.
Do not use any solvents, such as commercially available
cleaners, anti-static spray, or thinner to clean discs.
After using special disc cleaner, let the disc dry off well
before playing it.
On Discs
Never turn off the power and remove the unit from the car
with a disc loaded.
Handling Disc
Ball-point pen
Roughness
CAUTION
For your safety, the driver should not insert or eject a disc,
opening the operation panel while driving.
“Made for iPod” and “Made for iPhone” mean that an elec-
tronic accessory has been designed to connect specical-
ly to iPod or iPhone, respectively, and has been certied
by the developer to meet Apple performance standards.
Apple is not responsible for the operation of this device or
its compliance with safety and regulatory standards.
Please note that the use of this accessory with iPod or
iPhone may affect wireless performance.
iPhone, iPod, iPod Nano and iPod touch are trademarks
of Apple Inc., registered in the U.S. and other countries.
Copyright 2015 Google Inc.
Font used in this product is Licensed under the Apache
License, Version 2.0 (the “License”); you may not use this
le except in compliance with the License. You may obtain
a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing,
software distributed under the License is distributed on
an “AS IS” BASIS, WITHOUT WARRANTIES OR CONDI-
TIONS OF ANY KIND, either express or implied.
See the License for the specic language governing per-
missions and limitations under the License.
The Bluetooth® word mark and logos are registered
trademarks owned by the Bluetooth SIG, Inc. and any
use of such marks by Clarion Malaysia Sdn. Bhd. is under
license. Other trademarks and trade names are those of
their respective owners.
This product incorporates copyright protection technology
that is protected by U.S. patents and other intellectual
property rights. Use of this copyright protection technol-
ogy must be authorized by Rovi Corporation, and is in-
tended for home and other limited viewing uses only un-
less otherwise authorized by Rovi Corporation. Reverse
engineering and disassembly are prohibited.
Dolby® and the double-D symbols are registered trade-
marks of Dolby Laboratories.
microSDHC Logo is a trademark of SD-3C, LLC.
About the registered marks, etc.
Note:
Reverse engineering or disassembly is prohibited.

NX316AU 9
English
English
Owner’s Manual
4. PANEL CONTROLS
Names of the Buttons and Their Functions
Main Unit
CD/DVD slot
CD insertion slot.
IR Sensor
Receiver for remote control unit (operating range: 30º in
all directions).
[ ] button
Eject a CD/DVD when it is loaded in the unit.
[ ]/[VOLUME]/[SRC]
Press the knob to turn on power.
Press the knob when the unit is turned on to display
Home Screen; press again to return to current source.
Press and hold the knob to turn off the power.
Rotate the knob left or right to decrease or increase the
volume.
RESET hole
Reboot the system.
Note: When the RESET button is pressed, all saved
memory in the unit are cleared.
USB port
USB mass storage device/MTP/iPod/iPhone insertion.
AUX input (rear)
3.5mm Auxiliary jack insertion
Video/ DVB-T2 input (rear)
Composite video connection (CVBS) jack insertion.
microSD memory card slot
For memory card with navigation maps.
Touch screen
Resistive touch screen display.
Microphone
For handsfree.
Microphone
microSD memory
card slot

10 NX316AU
English
Owner’s Manual
5. REMOTE CONTROL
Inserting the Battery
Turn over the remote control unit.
Press the retention tab and pull out the battery tray and
remove the old battery.
Insert the new CR2025 battery and slide the battery tray
back in the remote control the same direction that you re-
moved it. Please ensure the tray is inserted in the correct
direction.
Notes:
Misuse may result in rupture of the battery, producing leakage of uid
and resulting in personal injury or damage to surrounding materials.
Always follow these safety precautions:
Use only the designated battery.
When replacing the battery, insert properly, with +/- polarities oriented
correctly.
Do not subject battery to heat, or dispose of in re or water. Do not
attempt to disassemble the battery.
Dispose of used batteries properly.
CR2025 battery
Rear side
Rear cover

NX316AU 11
English
English
Owner’s Manual
Remote Control Functions
•
[SRC]
[TOP MENU]
[RETURN]
[MENU]
[BAND]
[AUDIO]
[SUBTITLE]
[ANGLE]
[ ] , [ ]
[ ] , [ ]
[ ] , [ ]
[ ]
[VOL+ / -]
• Press this button to switch to the next source item on the Home Screen.
• Press this button to power on when the unit is power off.
• Press this button for more than 1 second to power off unit when the unit is power on.
Press this button to enter/exit the Home Screen.
• Increase/decrease volume (not available in Phone mode).
• Press this button to select the highlighted button.
Press these buttons to go to the next/previous tab/button on the touch screen.
ModeButton
[ENT]
Note:
The wireless remote control operation may not be optimal in direct sunlight.
• Press this button in CD/USB/MTP directory view to return to the previous layer.
• Press this button in iPod Menu to return to the previous layer.
• Press this button during Settings to exit Settings and return to the current mode.
• Press this button in Radio mode to enter/exit PTY Selection Menu (PTY must be turned on).
• Press this button in CD/USB/MTP mode to enter/exit the directory view.
• Press this button in iPod mode to enter/exit the iPod Menu.
• Press this button in Radio mode to switch to the next band.
• Press these buttons in Radio mode to go to the next/previous page in the PTY Selection Menu.
• Press these buttons in CD/USB/MTP mode to go to the next/previous page in the directory view.
• Press these buttons in iPod mode to go to the next/previous page in the iPod Menu.
• Press these buttons to access the top/bottom portions of the screen in Phone mode and Settings.
• Press these buttons in Radio mode to go to the next/previous preset channel.
• Press these buttons in CD/DVD/USB/MTP/iPod/Bluetooth Audio modes to go to the next/previous
track/chapter/picture/video.
• Press these buttons for more than 1 second in CD/DVD/USB/MTP/iPod/Bluetooth Audio modes to
perform fast-forward/fast-backward.
• Press the button in DVD video to toggle available angles.
• Press the button in CD/DVD/USB/MTP video to toggle available subtitles.
• Press the button in DVD video to toggle available audio.
• Press the button in CD/DVD/USB/MTP/iPod/Bluetooth Audio modes switch between pause and
playback.

12 NX316AU
English
Owner’s Manual
6. BASIC OPERATIONS
Turning on/off the power
Note:
Be careful about using this unit for a long time without running the
engine. If you drain the car’s battery too much, you may not be able
to start the engine and this can reduce the service life of the battery.
1. Press the [ ] knob to turn on the power.
2. It automatically remembers its last source mode and will
automatically switch to display that mode.
3. Press the [ ] button for more than 1 second to turn off
the power of the unit.
Switching Source Modes
1. Press the [HOME] button to access the Home Screen.
2. When the Home Screen is displayed, press the [HOME]
button to exit the Home Screen.
Home Screen
Clock and Indicators Display
The clock is displayed on the top right corner of the touch
screen. To adjust the clock, refer to “Settings Operations”.
The RDS indicators are displayed on the top right corner of
the touch screen, below the clock display. To adjust RDS
settings, refer to “RDS Operations”.
1. CD/DVD indicator. Lights up when a CD/DVD is inserted
into the unit.
2. Clock Display.
3. Bluetooth A2DP indicator. Lights up when A2DP prole is
connected to the unit.
4. Bluetooth HFP indicator. Lights up when HFP prole is
connected to the unit.
5. Bluetooth indicator. Lights up when Bluetooth is con-
nected to the unit.
6. REG indicator.
7. AF indicator.
8. PTY indicator.
9. TP indicator.
10. TA indicator.
Note:
The Home Screen indicator bar has the same indicator images but
in a different arrangement and layout.
Turning off the Display Monitor
1. On the Home Screen, press the button to turn
off the display monitor. The screen will be blank, while the
audio is still heard in the background.
2. Press the [ ] button, or any area on the blank screen, for
the display to restore.
Note:
The [SOURCE] button on the remote control and steering remote
control can also restore the display.
Adjusting the Volume
Turning the [VOLUME] knob clockwise increases the vol-
ume; turning it counter-clockwise decreases the volume.
The volume will be displayed in overlapping the touch
screen for 4 seconds. Press any area of the touch screen to
immediately cancel the volume display.
* The volume level is from 0 (minimum) to 33 (maximum). The fac-
tory default setting for this volume is “13”.
1. Brightness button.
2. Radio mode button.
3. Bluetooth Audio mode button.
4. CD/DVD mode button.
5. Phone mode button.
6. USB/iPod mode button.
7. Video-in/DVB-T2 mode button.
8. Clock display.
9. Bluetooth indicators.
10. AUX mode button.
11. Monitor OFF button.
12. Navi button.
13. RDS indicators.
14. Settings button.
15. Mute button.
1 2 3 4 5 6 7
11 10 9 8
15
14
13 12
1 2
3
4
5
6
7
8
9
10

NX316AU 13
English
English
Owner’s Manual
Screen Adjustment
Press the button to toggle the brightness of the touch
screen in the following sequence:
Default Bright Dim Default…
The screen brightness can be adjusted further in Settings.
For more details, refer to the Screen Adjustment tab in Set-
tings.
Mute Function
Press the button on the left hand display, when avail-
able, to activate the mute function. Press the button again
to release mute.
Note:
The button is not available during Settings.
Radio Illumination
The radio illumination can be dimmed using the vehicle il-
lumination dimming switch.
Parking Brake Safety
The video at the unit can only be displayed when the parking
brake is enabled (when the car is parked). The audio portion
of the video can still be played, but a blank screen will be
displayed in place of the video display.
Video Output
If an external monitor is connected to the head unit, pas-
sengers in the back seat can watch the video separately.
Note:
The external monitor can only mirror videos from Disc/USB that are
being played on the unit.
Mirrored videos can be displayed even if the parking brake is disabled
(when the car is driving).
HDCP enabled video cannot be displayed through video output.
Reverse Camera View
1. When the vehicle is set to reverse gear, the unit will dis-
play the reverse camera view.
2. All video display will be disabled and audio will be muted
during reverse camera view.
3. The system will return to the previous display after the
reverse gear is released.
Basic Operations

14 NX316AU
English
Owner’s Manual
7. RADIO MODE OPERATIONS
Listening to the Radio
1. Press the button on the Home Screen to select Radio
mode. The display will change accordingly.
2. Press the [FM1/FM2/FM3/AM] button to select one of the
designated bands such as FM1, FM2, FM3 or AM. Each
time the button is pressed, the display will change in the
following order:
FM1 FM2 FM3 AM FM1…
1. FM1/FM2/FM3/AM Button
2. PRESET Tab
3. SEEK Tab
4. RDS Tab
5. Tab Controls
6. PTY Name Display
7. Station Name Display
8. Frequency Display
9. Channel Display
Seek Tuning
1. Press the button to select the SEEK Tab. The
tab controls will change accordingly.
2. Press the [DX/LOC/MANU] button to select the seek
mode. The button display will change accordingly.
Every time the [DX/LOC/MANU] button is pressed, the
display will change:
DX SEEK LOCAL SEEK MANUAL SEEK DX
SEEK...
Notes:
There are 2 types of seek tuning: DX Seek and LOCAL Seek.
DX Seek can automatically tune in to receivable broadcast stations;
LOCAL Seek can tune in to only broadcast stations with good recep-
tion sensitivity.
3. Press the button to perform search in the direction of
higher frequencies.
4. Press the button to perform search in the direction of
lower frequencies.
TP Seek
1. Press the tab to select the SEEK Tab. The tab
controls will change accordingly.
2. When “TP” is not lit, if you press the button, “TA” in
the display lights up and the unit automatically searches
for a TP station.
3. If a TP station is not received, the unit continues the
search operation. Press the button to stop the TP
station searching.
Note:
For more details, refer to “RDS Operations”.
Manual Tuning
1. Press the button to select the SEEK Tab. The
tab controls will change accordingly.
2. Press the [DX/LOC/MANU] button to select the MANUAL
Seek mode.
Note:
Manual Seek allows for manual tuning to any frequency regardless
of broadcast.
3. Press the button to perform a single step in the di-
rection of higher frequencies.
4. Press and hold the button to continuously search for
higher frequencies.
5. Press the button to perform a single step in the direc-
tion of lower frequencies.
6. Press and hold the button to continuously search for
lower frequencies.
Autostore
Auto store is a function for storing up to 6 stations that are
automatically tuned in sequentially. If 6 receivable stations
cannot be found then the remaining memory locations will
retain the previous station selections.
1. Press the button to select the SEEK Tab. The
tab controls display will change accordingly.
2. Press the [FM1/FM2/FM3/AM] button to select the de-
sired band.
3. Press the button to begin auto store. The 6 stations
with the strongest reception are stored automatically into
the preset channels.
1. Seek Down Button
2. DX/LO/MANU Button
3. Seek Up Button
4. Save Button
5. Autostore Button
6. TA Button
1
7
2 3 4
9
8
56
6
1 2 3
5 4

NX316AU 15
English
English
Owner’s Manual
Radio Mode Operations
Storing Preset Memory
1. Preset Channel Buttons.
2. Cancel Button.
Preset memory function can store up to 24 stations: Six sta-
tions each for FM1, FM2, FM3 and AM.
1. PTY Seek Button
2 REG Button
3 PTY Selection Button
4 AF Button
5 PTY Button
6 PTY List
7 Page Down Button
8 Page Up Button
9 Return Button
Note:
The present memory will be reset a few hours after disconnecting the
vehicle battery.
1. Press the [FM1/FM2/FM3/AM] button to select the de-
sired band.
2. Press the / button to tune into a desired station.
3. Press the button to store the current frequency.
4. Press the button to cancel the storing process.
5. Press one of the 6 [PRESET] buttons to store the current
station into the preset memory. The tab controls display
will return to the previous layout.
Recalling a Preset Station
1. Press the button to select the PRESET Tab. The
tab controls will change accordingly.
2. A total of 24 preset positions (6-FM1, 6-FM2, 6-FM3,
6-AM) exists to store individual radio stations in memory.
Pressing the corresponding [PRESET] button recalls the
stored radio frequency.
RDS (Radio Data System)
Press the RDS button to select the RDS Tab. The tab con-
trols will change accordingly.
This unit has a built-in RDS decoder system that supports
broadcast stations transmitting RDS data.
This system can display the name of the broadcast station
being received (PS) and can automatically switch to the
broadcast station with the best reception as you move long
distances (AF switching).
Also, if a trafc announcement or programme type is broad-
cast from an RDS station, no matter what mode you are in,
this broadcast is received. Additionally, if EON information
is received, this information enables automatic switching of
other preset stations on the same network and interruption
of the station being received with trafc information from oth-
er stations (TP). This function is not available in some areas.
When using the RDS function, always set the radio to FM
mode.
The RDS feature consists of:
AF : Alternative Frequency
PS : Programme Service Name
PTY : Programme Type
EON : Enhanced Other Network
TP : Trafc Programme
TA : Trafc Announcement
* RDS interrupt does not function during AM radio reception.
* When set receives RDS signal, and can read PS data, PS appears
in the display.
8. RDS OPERATIONS
12
56 3 14 2
9
8
7

16 NX316AU
English
Owner’s Manual
RDS Operations
TA (Trafc Announcement)
In the TA standby mode, when a trafc announcement
broadcast starts, the trafc announcement broadcast is re-
ceived as top priority regardless of the source mode so you
can listen to it. Trafc programme (TP) automatic tuning is
also possible.
* This function can only be used when “TP” is lit in the display. When
“TP” is lit, this means that the Radio Data System broadcast station
being received has trafc announcement programmes.
Turning on TA
1. Press the button to select the SEEK Tab. The
tab controls will change accordingly.
2. If you press the button when “TP” only is lit in the dis-
play, “TA” and “TP” will light up in the display and the unit
is set to TA standby mode until a trafc announce¬ment is
broadcast.
3. When a trafc announcement broad¬cast starts, the dis-
play will change.
Turning off TA
1. Press the button to select the SEEK Tab. The
right display will change accordingly.
2. During TA standby mode, press the button. The “TA”
indicator in the display goes off and TA standby mode is
cancelled.
3. If “TP” is not lit, press the button to search for a TP
station.
Cancelling TA Interrupt
1. If you press the button while a trafc announce-
ment broadcast is being received, the trafc announce-
ment broadcast reception is cancelled and the unit returns
to the TA standby mode.
Searching for a TP station
1. When “TP” is not lit, if you press the button, “TA” in
the display lights up and the unit automatically searches
for a TP station.
2. If a TP station is not received, the unit continues the
search operation. Press the button to stop the TP
station searching.
Emergency Broadcast
If an emergency broadcast is received, all the source mode
operations are stopped. The display will change accordingly.
1. If you press the button while an emergency
broadcast is being received, the emergency broadcast
reception is cancelled and the unit returns to the previous
mode.
PTY (Programme Type)
This function enables you to listen to a broadcast of the se-
lected programme type even if the unit is on a source mode
other than radio.
Some countries do not have PTY broadcast.
During TA standby mode, a TP station has priority over a PTY broad-
cast station.
Turning on PTY
1. Press the RDS button to select the RDS Tab. The tab con-
trols will change accordingly.
2. If you press the PTY button, “PTY” in the display lights up
and PTY standby mode is turned on. When the selected
PTY broadcast starts, the display will change and the PTY
item name appears in the display
Turning off PTY
1. Press the RDS button to select the RDS Tab. The tab con-
trols will change accordingly.
2. During PTY standby mode, press the PTY button. The
“PTY” indicator in the display goes off and PTY standby
mode is cancelled.

NX316AU 17
English
English
Owner’s Manual
RDS Operations
Cancelling PTY Interrupt
1. If you press the button while a PTY interrupt is
being received, the PTY interrupt is cancelled and the unit
returns to the PTY standby mode.
Selecting PTY
1. Press the RDS button to select the RDS Tab. The tab con-
trols will change accordingly.
2. During PTY standby mode, press the button to
enter the PTY Selection Menu. The left display will
change accordingly.
3. There are 29 PTY items that can be selected.
PTY item
ENGLISH
NEWS
AFFAIRS
INFO
SPORT
EDUCATE
DRAMA
CULTURE
SCIENCE
VARIED
POP_M
ROCK_M
EASY_M
LIGHT_M
CLASSICS
OTHER_M
WEATHER
FINANCE
CHILDREN
SOCIAL
RELIGION
PHONE_IN
TRAVEL
LEISURE
JAZZ
COUNTRY
NATION_M
OLDIES
FOLK_M
DOCUMENT
CONTENTS
News
Today’s events
Information
Sports
Education
Drama
Culture
Science
Variety
Pop music
Rock music
Easy music
Light music
Classics
Other music
Weather
Finance
For children
Social
Religion
Phone in
Travel
Leisure
Jazz
Country
Nation music
Oldies
Folk music
Documentaries
Searching for a PTY Station
1. Press the RDS button to select the RDS Tab. The tab con-
trols will change accordingly.
2. During PTY standby mode, press the button to
search for a PTY broadcast in the direction of a higher
frequency.
If no station with the selected PTY broadcast can be received, the
unit returns to the previous receiving station.
Volume Setting of TA, Emergency
Broadcast, and PTY
The volume for TA, emergency broadcast, and PTY inter-
rupts can be set during their respective interrupts.
The factory default setting is “15”.
During TA, emergency broadcast or PTY interrupt, turn the
[VOLUME] rotary knob to set the volume to the desired level
(0 to 33).
When the interrupt ends, volume returns to the level it had before
interrupt.
AF (Alternate Frequency) Function
The AF function switches to a different frequency on the
same network in order to maintain optimum reception.
1. Press the RDS button to select the RDS Tab. The tab con-
trols will change accordingly.
2. Press the button and “AF” lights up in the display
screen. AF function is turned on.
3. When AF function is turned on, press the button and
the “AF” on the display screen is turned off. AF function is
turned off.
REG (Regional Programme)
When the REG function is ON, the optimum regional station
can be received. When this function is OFF, if the regional
station area switches as you drive, a regional station for that
region is received.
1. Press the RDS button to select the RDS Tab. The tab con-
trols will change accordingly.
2. Press the button and “REG” lights up in the display
screen. REG function is turned on.
3. When REG function is turned on, press the button
and the “REG” on the display screen is turned off. REG
function is turned off.
Notes:
This function is disabled when a national station such as BBC R2 is
being received.
The REG function ON/OFF setting is only valid when the AF function
is ON.

18 NX316AU
English
Owner’s Manual
9. CD/USB MODE OPERATION
Discs
Playable discs
This DVD video player can play the following discs.
Playable discs
CD TEXTDVD video discs Audio CD
Precautions when Creating MP3 les
Usable sampling rates and bit rates:
1. MP3 : Sampling rate 8 kHz-48 kHz,
Bit rate 16 kbps-320 kbps/VBR
2. WMA : Sampling rate 8 kHz-48 kHz,
Bit rate 16 kbps-320 kbps/VBR
3. AAC : Sampling rate 8 kHz-48 kHz,
Bit rate 16 kbps-320 kbps/VBR
File extensions
Always add a le extension “.MP3” or “.mp3” to a MP3 le,
and “.WMA” or “.wma” to a WMA and “.M4A” or “.m4a” to
a AAC le extension by using single byte letters. If you
add a le extension other than specied or forget to add
the le extension, the le cannot be played. In addition, if
you use upper case and lower case letters (capital and
small letters) mixed for le extensions, normal play may
not be possible.
Audio les other than MP3/WMA/AAC data cannot be
played.
Playing les with a format not supported will be skipped.
File and disc not supported
Files and discs with following extensions are not support-
ed: *.AAC, *DLF, *.M3U, *.PLS, *.MP3 PRO les, les with
DRM, open session discs.
To disable DRM (Digital Rights
Management)
When using Windows Media Player 10/11, click on TOOL
OPTIONS RIP MUSIC tab, then under Rip settings, unclick
the check box for COPY PROTECT MUSIC. Then, recon-
struct les.
Notes:
Personally constructed WMA les are used at your own responsibility.
Disabling DRM can be done if the le is ripped from CD.
Logical format (File system)
When writing an MP3/WMA/AAC le on a disc, please
select “ISO9660 level 1 or level 2 (without including ex-
pansion format)” as the writing software format. Normal
playback may not be possible if the disc is recorded on
another format.
The folder name and le name can be displayed as the
title during MP3/WMA/AAC play.
Entering File and Folder Names
If the le name and folder name contains the character oth-
er than code character list might cause the le and folder
names displayed incorrectly.
Picture File extensions
Always add a le extension “.JPEG” or “.JPG” to picture le
by using single byte letters. If you add a picture le extension
other than specied or forget to add the le extension, the
le cannot be played.
Playable video les
This system can play video les stored in the disc/USB
memory/MTP device.
*.avi les
Format: Xvid
Resolution: 720*480/576
Audio format: WMA/PCM/LPCM/AAC LC/MPEG
Audio(MP1/2/3)
*.mp4 les
Format: Xvid
Resolution: 720*480/576
Audio format: WMA/PCM/LPCM/AAC LC/MPEG-
Audio(MP1/2/3)
*.mpg/mpeg les
• Format: MPEG-1/MPEG-2
• Resolution: 720*480/576
• Audio format: Dolby Digital (AC3)/LPCM/MPEG-
Audio(MP1/2/3)
*.vob les
• Format: MPEG-1/MPEG-2
• Resolution: 720*480/576
• Audio format: Dolby Digital (AC3)
*.dat les
• Format: MPEG-1
• Resolution: 720*480/576
• Audio format: Dolby Digital (AC3)/LPCM/MPEG-
Audio(MP1/2/3)
File extensions
Always add a le extension “.avi” or “.AVI”, “.mp4” or “.MP4”,
“.MPG” or “.mpg”, “.MPEG” or “.mpeg”, “.VOB” or “.vob”,
“.DAT” or “.dat” to video le by using single byte letters. If
you add a video le extension other than specied or forget
to add the le extension, the le cannot be played.
About CD
Logical format (File system)
Mode
File System
CD
ISO 9660 Level 1, 2,
Romeo or Joliet

NX316AU 19
English
English
Owner’s Manual
CAUTION
Do not try to put your hand or ngers in the disc insertion
slot. Also never insert foreign objects into the slot.
Do not insert discs where adhesive comes out from cel-
lophane tape or a rental CD label, or discs with marks
where cellophane tape or rental CD labels were removed.
It may be impossible to extract these discs from the unit
and they may cause the unit to break down.
Notes:
Some CDs recorded on CD-R/RW mode may not be usable.
PBC toggle function for VCD is not supported in this unit.
Note on region numbers
The DVD video system assigns a region number to DVD
video players and DVD discs by sales area. DVD video
players sold in Asia can play back DVD discs with the re-
gion number “ALL”, “4” or any combination of numbers
that also incorporate a “4”.
The DVD video region number is marked on the disc
jacket as shown below.
CD/USB Mode Operations
4
ALL
134
Watching/Listening to a disc
If a disc has been loaded, press the [HOME] button to select
CD/DVD mode.
Notes:
When CDDA disc or DVD is loaded, the play mode is automatically
engaged.
When CDMP3 disc is inserted for the rst time, the system will go to
directory display.
If you reinsert the same disc, the system will resume playback.
Loading a CD
Insert a CD into the center of the CD insertion slot with the
labeled side facing up. The CD will begin reading and will
start playing.
Notes:
Do not insert another disc forcefully.
Discs not bearing the logo mark and CD-ROMs cannot be played by
this unit.
Some CDs recorded in CD-R/CD-RW mode may not be usable.
8cm compact disc is not supported. Do not attempt to insert the disc
into the CD slot.
Eject the CD
Press the button, then the disc will be ejected. The unit
will direct return to Tuner mode.
Notes:
If you force a CD into CD slot before auto reloading, this can damage
the CD.
If a CD (12 cm) is left in the ejected position for 15 seconds, the CD
is automatically reloaded (Auto reload).
If you leave the ejected CD without removing it, it will be drawn into
the unit automatically after about 15 seconds.
USB
This system can play audio les (MP3/WMA/AAC) stored in
an USB memory which is recognized as “USB Mass Storage
Class device”. You can use your USB memory as an audio
device by simple copying desired audio les into it.
Note:
This system will not operate or may operate improperly with some
USB memory.
Files protected with any DRM cannot be played.
About USB memory device
USB is an acronym for Universal Serial Bus, and refers
to an external bus standard supporting data rates of 12
Mbps.
This unit is compatible with USB 1.1/2.0/3.0 with maxi-
mum data transfer rates of 12 Mbps.
USB memory devices that can be played by connecting
to the unit’s USB cable are limited to those recognized as
“USB mass storage class devices”; operation is not guar-
anteed with all USB memory devices.
Devices compatible with “USB Mass Storage Class” can
be used merely by connecting to the host device, without
need for special drivers or application software.
Consult the manufacturer of your USB memory device
for information regarding whether it is supported by “USB
Mass Storage Class” standards.
To prevent the accidental loss of data, always back up
important data on your computer.
This unit does not support connections to a computer. In
addition, connections made through a USB hub device
are also not supported.
When a USB memory device is composed of two or more
drives, only the rst drive will be detected.
USB memory devices with security functions cannot be
played.
The order in which tracks are recorded may differ depend-
ing on the USB memory device connected (the actual
playback order may not be the same as that indicated on
your computer’s display).
USB Digital Media Streaming
This unit supports USB Digital Media Streaming. USB Digital
Media Streaming is a function used to play music les trans-
mitted using Media Transfer Protocol (MTP).
Hot plugging function
This unit has the ability to recognize the changes of connect-
ing and disconnecting an USB memory/MTP device.
Mode
File System
USB
FAT16, FAT 32

20 NX316AU
English
Owner’s Manual
CD/USB Mode Operations
Connecting a USB memory/MTP device
1. Connect the USB memory/MTP device into the port with
the correct direction.
2. Always insert the USB memory/MTP device fully into the
port. Incomplete connections may cause the USB memo-
ry/MTP device not be recognized.
3. Depending on the number of tracks recorded, some
amount of time may be required until all tracks are read
into the unit. It will take some time to read the USB mem-
ory/MTP device before playback begins.
4. USB memory/MTP devices may have different shape de-
pends on brands. Some USB memory/MTP devices may
not be able to plug into the port due to the shape design.
Please use an extension cable instead.
5. Please reconnect the USB memory/MTP device when it
cannot be detected properly.
Notes:
Do not forcibly connect the USB memory device to the port with incor-
rect direction as this will damage the USB memory device as well as
the USB slot.
Watching/Listening to a track with USB
memory/MTP device
1. If a USB memory/MTP device have been inserted, press
the [HOME] button to select the USB/iPod mode.
Notes:
When USB memory/MTP device is rst time loaded, the system will
go to directory display.
If you reconnect the same device that you disconnected last, the
system will playback where it left off.
CAUTION
For safety driving purpose, avoid inserting the USB mem-
ory/MTP device directly into the USB port.
Please use an USB extension cable instead for USB con-
nection.
Always backup and save important data on your com-
puter.
Unplug the USB memory/MTP device
1. Remove the USB memory/MTP device from the USB slot
during playback, system will direct return to Tuner mode.
2. Remove the USB memory/MTP device from the USB slot
during reading, system will show “NO DEVICE”.
Notes:
If the device has no supported les, “NO FILE” is displayed.
If you reconnect the same device that you disconnected last, the
system will resume the last playback position.