Clarke Strong-Arm CSTF4 User manual

USER INSTRUCTIONS
GC02/13
ALUMINIUM FOLDING SACK
TRUCKS
Models CSTF4, 5B & 6
Part Nos 6500790, 6500796 & 6500794

2
INTRODUCTION
Thank you for purchasing this CLARKE Folding Sack Truck.
Before attempting to use this product, it is essential that you read this manual
thoroughly and carefully follow all instructions given. In doing so you will
ensure the safety of yourself and that of others around you, and you can also
look forward to the product giving you long and satisfactory service.
GUARANTEE
This CLARKE product is guaranteed against faulty manufacture for a period of
12 months from the date of purchase. Please keep your receipt as proof of
purchase.
This guarantee is invalid if the product is found to have been abused or
tampered with in any way, or not used for its intended purpose.
Faulty goods should be returned to their place of purchase, no product can
be returned to us without prior permission.
This guarantee does not effect your statutory rights.
ENVIRONMENTAL PROTECTION
Do not dispose of this product with general household waste. All
tools, accessories and packaging should be sorted, taken to a
recycling centre and disposed of appropriately.
TECHNICAL SPECIFICATIONS
Please note that the details and specifications contained herein, are correct at the
time of going to print. However, CLARKE International reserve the right to change
specifications at any time without prior notice.
erutaeF noitacificepS
4FTSCB5FTSC6FTSC
mumixaM
yticapaC gk06gk09gk002
snoisnemiD
mm)HxDxL(
nepo0001x004x024089x005x5440721x095x006
dedlof5
36x55x583037x06x0050101x09x095
thgieWgk3gk5.4gk5.9

3
SAFETY PRECAUTIONS
1. Keep the work area tidy & well lit.
2. Keep children and visitors away from the work area.
3. Never carry out any alterations or modifications to this product.
4. Do not exceed the stated capacity of the truck.
5. Load the platform evenly with the centre of gravity of the load over the
centre of the platform.
6. Do not bounce the truck over rough ground, or down curbs etc. Use
ramps wherever possible.
7. Do not transport a tall load which may impair your forward view.
8. Take extra care if transporting a wide load.
9. Always ensure the load is stable before attempting to move the truck.
10. Take care that the heaviest part of a tall load is to the bottom of the truck
touching the frame. When stacking loads ensure that the height of the
stack does not extend above the handle.
Please keep these instructions in a safe place for future reference.
FOLDING & UNFOLDING THE TRUCK
CSTF4-to extend the handle pull the cross-beam upwards until the handle
locks into position. To lower the handle, pull the cross-beam in an upwards
direction and then lower. To unfold the platform, simply push it down until it
snaps into place and the wheels automatically open out.
CSTF5B-press the button in the centre of the cross-beam and pull the handle
upwards untill it locks into position, then unfold the platform by pushing it
down and the wheels automatically open out.
CSTF6- to extend the handle, press the button in the centre of the cross-beam
and pull the handle upwards until it locks into place. Then unfold the platform
by pushing it down until it snaps into place and the wheels open out. For the
CSTF6 model, lift and revolve the handles to the open position for use and
fold away afterwards.
To fold the platform on any model, pull it up until it lies flat against the back
support with the wheels automatically folded away. Then lower the handle.