Clarke Strong-Arm CSTF6B User manual

USER INSTRUCTIONS
ORIGINAL INSTRUCTIONS GC0619 rev 4
ALUMINIUM FOLDING SACK TRUCKS
MODEL NO: CTSTF4, 5B & 6B
PART NO: 6500790, 6500795 & 6500796

2
Parts & Service: 020 8988 7400 / E-mail: [e-mail] or [e-mail]
INTRODUCTION
Thank you for purchasing this CLARKE Folding Sack Truck.
Before attempting to use this product, please read this manual thoroughly and
follow the instructions carefully. In doing so you will ensure the safety of yourself
and that of others around you, and you can look forward to your purchase
giving you long and satisfactory service.
GUARANTEE
This product is guaranteed against faulty manufacture for a period of 12
months from the date of purchase. Please keep your receipt which will be
required as proof of purchase.
This guarantee is invalid if the product is found to have been abused or
tampered with in any way, or not used for the purpose for which it was
intended.
Faulty goods should be returned to their place of purchase, no product can
be returned to us without prior permission.
This guarantee does not effect your statutory rights.
ENVIRONMENTAL PROTECTION
Do not dispose of this product with general household waste. All tools,
accessories and packaging should be sorted, taken to a recycling centre and
disposed of appropriately.
SPECIFICATIONS
Please note that the details and specifications contained herein, are correct at the time
of going to print. However, CLARKE International reserve the right to change
specifications at any time without prior notice.
CSTF4 CSTF5B CSTF6B
Maximum Rated Load
Capacity
60 kg 90 kg 200 kg
Dimensions
(L x D x H) mm
Open 420 x 400 x1000 445 x 500 x 980 600 x 600 x1280
Closed 385 x 55 x 635 500 x 60 x 730 590 x 80 x 1020
Weight 3 kg 4.5 kg 9.5 kg

3
Parts & Service: 020 8988 7400 / E-mail: [e-mail] or [e-mail]
SAFETY PRECAUTIONS
1. Keep the work area tidy & well lit.
2. Keep children and visitors away from the work area.
3. Never carry out any alterations or modifications to this product.
4. Do not exceed the stated capacity of the truck.
5. Load the platform evenly with the centre of gravity of the load over the
centre of the platform.
6. Do not bounce the truck over rough ground, or down curbs etc. Use ramps
wherever possible.
7. Do not drop or lay the trolley down when heavily loaded.
8. Do not transport a tall load which may impair your forward view.
9. Take extra care if transporting a wide load.
10. Always ensure the load is stable before attempting to move the truck.
11. Take care that the heaviest part of a tall load is to the bottom of the truck
touching the frame. When stacking loads ensure that the height of the
stack does not extend above the handle.
Please keep these instructions in a safe place for future reference.
FOLDING & UNFOLDING THE TRUCK
CSTF4-to extend the handle pull the cross-beam upwards until the handle
locks into position. To lower the handle, pull the cross-beam in an upwards
direction and then lower. To unfold the platform, simply push it down until it
snaps into place and the wheels automatically open out.
CSTF5B-press the button in the centre of the cross-beam and pull the handle
upwards until it locks into position, then unfold the platform by pushing it down
and the wheels automatically open out.
CSTF6B- to extend the handle, press the button in the centre of the cross-
beam and pull the handle upwards until it locks into place. Then unfold the
platform by pushing it down until it snaps into place and the wheels open out.
Lift and revolve the handles to the desired position for use and fold away
afterwards.
To fold the platform on any model, pull it up until it lies flat against the back
support with the wheels automatically folded away and lower the handle.