Clear One Aura VERSA PRO 150 User manual

Quick-Start Guide
VERSA™ PRO 150
COMPLETE SOLUTION

Versa Pro 150
iQSG-0077-002v1.1 February 2021
© 2021 ClearOne, Inc. All rights reserved.
Information in this document is subject to change without notice.
Document: QSG-0077-002v1.1 February 2021
CONTACT INFORMATION
Headquarters
5225 Wiley Post Way
Suite 500
Salt Lake City, UT 84116
US: +1.801.975.7200
International: +1.801.975.7200
Aura Sales
US: +1.888.HEY.AURA
International: +1.801.975.7200
[email protected]
Aura Tech Support
US: +1.888.HEY.AURA
International: +1.801.975.7200
[email protected]
NOTICES

Quick-Start Guide
1QSG-0077-002v1.1 February 2021
COMPONENTS INCLUDED
The Versa Pro 150 includes the UNITE®150 PTZ Camera, the
CONVERGE®Huddle DSP Mixer, a Ceiling Mic Array, and a free
COLLABORATE®Space lifetime subscription.
AUR-2100-004
UNITE 150 PTZ camera, power
supply, USB cable, and camera
remote control
AUR-3200-701
(1) CONVERGE Huddle
(2-4) Terminal Block Connectors,
(5) USB 3.0 cable
(6) TRRS cable
(7) Mini COMBICON plug
connectors
(8-9) Phillips pan-head screws,
(10) Mounting ears kit
AUR-001-013-W
Ceiling Microphone Array, cables
Free COLLABORATE Space
lifetime subscription

Versa Pro 150
2QSG-0077-002v1.1 February 2021
SET UP YOUR PRODUCT
1. Connect the UNITE 150 camera to a USB 3.0 port on the
CONVERGE Huddle.
2. Connect the Ceiling Mic Array to a Mic/Line input on the
CONVERGE Huddle.

Quick-Start Guide
3QSG-0077-002v1.1 February 2021
3. Connect the display to the HDMI output on the CONVERGE Huddle.
4. Connect the camera to a power supply. Connect the CONVERGE
Huddle to a PoE power injector (Midspan), or PoE Ethernet Network
Switch (Endspan).

Versa Pro 150
4QSG-0077-002v1.1 February 2021
For more detailed information about CONVERGE Huddle, Ceiling Mic
Array, and UNITE 150 products, please refer to the appropriate quick-
start guide on the ClearOne website:
www.clearone.com
5. To cast a laptop screen onto a display via USB 3.0, install the
DisplayLink driver (one time installation) onto the laptop.
You can download the driver from:
www.displaylink.com/downloads
Note: If a Windows 10 laptop comes with the DisplayLink
driver pre-installed, it does not need to be installed
separately. The Versa hub has been tested with DisplayLink
driver version 8.2.1999.0.
6. Connect your laptop to the USB 3.0 Type-B input port on
the CONVERGE Huddle.