Sony IPELA PCS-XG55 Instruction Manual

Main indicators that appear during
communication
Controlling a remote camera
Local microphone is turned off.
Presentation (transmission) is being
executed.
Presentation (reception) is being
executed.
Local party has a drawing right of
annotation.
For details on operations, refer to the Operating Instructions
(stored in the supplied CD-ROM).
HD Visual Communication System PCS-XG80/XG80S/XG55/XG55S
Quick Connection Guide Using Direct Dial
Is the IP address of
the local system* or
the ISDN line number
displayed?
Is the picture of your
camera (local picture)
on the monitor
screen?
Note: Connection to a remote
party is not possible if neither
the IP address * nor ISDN line
number is not displayed.
* You can hide the IP address of
the local system using the setup
menu.
Turn on your HD Visual Communication System and TV monitor, and check the following to ensure that
connection is possible.
After checking...
4-179-435-11 (1)©2010 Sony Corporation
1 Select the Line I/F and
press ENTER.*
Select the Line
I/F to use.
2 Select the number text
box and press ENTER. 3 Select “Dial” and press ENTER.
The system establishes
communication.
Number text box Dial
///(arrow)
buttons and
ENTER button
CONNECT button
BACK SPACE
button
Buttons used for
number input
DOT button Press.
Line I/F
Or, press .
Enter the IP
address or
ISDN line
number of a
remote party.
Let’s connect
To begin with
* The Line I/F cannot be selected
depending on the system setup.

Remote Commander Guide: Operations available during communication
For details on operations, refer to the Operating Instructions (stored in the supplied CD-ROM).
Switching on/
off the local
microphone
To increase the
volume
To decrease the
volume
Switching the picture on the TV monitor
Press the LAYOUT button to display the
Layout menu.
Select the screen display pattern of the local
and remote pictures using ///and
ENTER buttons.
Selecting the input picture
Press the VIDEO INPUT button to display the
Video Input menu.
Select the video input using ///and
ENTER buttons.
CAMERA: Video input from the camera
connected to CAMERA connector
S VIDEO*:
Video input from the camera or
equipment connected to S VIDEO IN connector
RGB: Video input from the equipment
connected to RGB IN connector
YPbPr: Video input from the equipment
connected to VIDEO IN YPbPr jacks
* This function is not available on the PCS-
XG55/XG55S.
Operating the menu
Select the setting item in the menu displayed on the
screen, and confirm the selection.
Adjusting the
sound volume of
the remote party
Transmitting a picture
for presentation
You can transmit a picture
from the computer
connected
to the RGB IN
connector to a
remote party.
Switching the
local camera
and remote
camera to be
controlled
Ending the
communication
and
disconnecting
Recalling the
Preset Camera
Angle
Select “Preset” in
the Camera menu
to display the Preset
Setting List.
Press button 1 to 6 to
move the camera to
the preset position.
Displaying Camera menu
Press the CAMERA button to display the Camera menu.
Select the menu item using ///and ENTER
buttons, and the selected adjustment menu is
displayed.
Adjustments: for angle and zoom adjustments
Brightness: for brightness adjustment
Preset: for presetting and recalling the camera angle
and zoom
Details: for focus adjustment, white balance adjustment
and backlight compensation, digital zoom, Bright
Face and noise reduction filter functions
Adjusting the camera angle and zoom
Displaying Tools menu
Press the TOOLS button to display the Tools
menu.
Select the menu item using
/// and ENTER
buttons, and you can use the selected function
such as “Annotation.”
To enlarge the
picture
To reduce the
picture
To move the camera
angle
Up
Left Right
Down
“IPELA” and are trademarks of Sony Corporation
Select the
setting item.
Confirm the
selection.
LED