Cleveland AFF-1150-EC User manual

Cleveland
™
Project ________________________________
Item __________________________________
Quantity _______________________________
FCSI Section ____________________________
Approval _______________________________
Date __________________________________
1333 East 179 St.,
Cleveland, Ohio, U.S.A. 44110
Tel: [phone]
Fax: [phone]
Web Site: www.ClevelandRange.com
Email: [e-mail]
COO CHILL SYSTEMS Cook/Chill S stems
Cleveland Standard Features
IElectrically powered belt Exiting Conveyor with quick
disconnects for the Air and Electrical hookups for use
with the Cycle-Matic Form-Fill-Seal Machine
IAir operated raise and lower loading end of Exiting
Conveyor for various pouch lengths
INo additional Air or Electric required if used with
Cycle-Matic Form-Fill-Seal Machine
IAll stainless steel construction
IFrame mounted on (4) 3" diameter lockable swivel
casters
I18" wide USDA approved polypropylene belt with rub-
ber inserts
I1/3 Horse power TEFC motor with drive gearbox
IVariable belt speed controlled from Cycle-Matic Form-
Fill-Seal Machine touch screen
IExiting Conveyor can operate in either Constant Run or
Timed Run
IOperator start/stop controlled from Cycle-Matic Form-
Fill-Seal Machine touch screen
IEmergency stop at Cycle-Matic Form-Fill-Seal Machine
control panel
IAccepted for use in U.S.D.A. Inspected Facilities
SECT. XIV PAGE 33
0907
EXITING CONVEYOR
FOR USE WITH CYCLE-MATIC VERTICAL
FORM-FILL-SEAL MACHINE
MODEL:  AFF-1150-EC
Shall be CLEVELAND Mo el AFF-1150-EC EXITING CONVEYOR
with; Air operate raise an lower, loa ing en of Exiting
Conveyor for various bag lengths; All stainless steel construc-
tion; Frame mounte on (4) 3" iameter lockable swivel casters;
18" wi e USDA approve polypropylene belt with rubber inserts;
1/3 Horse power TEFC motor with rive gearbox; Variable belt
spee an Operator start/stop controlle from Cycle-Matic Form-
Fill-Seal Machine touch screen; Exiting Conveyor can operate in
either Constant Run or Time Run; Emergency stop at Cycle-
Matic Form-Fill-Seal Machine control panel.
Short Form Specifications

SECT. XIV PAGE 34
0907
Litho in USA
Cleveland Range reserves right of design improvement or modification, as warranted.
(NOT TO SCALE)
61 3/4"
32 1/2”
28.00"
711mm
18.00"
457mm
5 5/16”
17 3/4"
MOTOR POWER
CABLE TO
AFF-1150 CONTROL PANEL
NO EXTRA POWER
REQUIRED
MOTOR POWER
CABLE TO
AFF-1150
CONTROL BOX
NO EXTRA AIR
REQUIRED
AIR SUPPLY HOSE
TO AFF-1150
85 PSI MAX
AIR SUPPLIED FROM CYCLEMATIC
NO EXTRA AIR REQUIRED
2
3
1
1
4
42
16.00"
50.00"
98.38"
32.25"
63.78"
77.50"
96.88"
32.00"
37.75"
8.25" MIN.
(210mm)
25.50" MAX.
(648 mm)
29.75"
(756 mm)
66.25"
1683mm
25.25"
641mm
13.25"
337mm
17.50"
438mm
33.75"
857mm