Coaster 223582 User manual

ASSEMBLY INSTRUCTIONS
COASTER FINE FURNITURE
Fine Furniture for every stage of life
22358 2
Nightstand
PAGE 1 OF 5 COASTERFURNITURE.COM
REVISION 0 : 02/17 /2023

ITEM: 22358 2
ASSEMBLY TIME
A NIGHTSTAND 1PC
B LEG 4PCS
NOTE:
Phillips head screw driver is required in the assembly process; however, manufacturer does not provide this item.
COASTERFURNITURE.COM
15 MINUTES
PARTS IDENTIFICATION
PAGE 2 OF 5
2. This product is for home use only and not intended for commercial establishments.
1. Don't attempt to repair or modify parts that are broken or defective.Please contact the store
immediately.
3. Please follow attached instructions in the same sequence as numbered to assure fast & easy assembly.
2. Please check to see that all hardware and parts are present prior to start of assembly.
1. Remove hardware from box and sort by size.
ASSEMBLY INSTRUCTIONS
ASSEMBLY TIPS :
WARNING !
ADAPTER 1PC
C

ASSEMBLY INSTRUCTIONS
STEP 1
STEP 2
COASTERFURNITURE.COM
PAGE 3 OF 5
ITEM: 22358 2

ASSEMBLY INSTRUCTIONS
STEP 3
STEP 4
COMPLETE
COASTERFURNITURE.COM
PAGE 4 OF 5
ITEM: 22358 2

ANTI-TIPPING INSTALLMENT INSTRUCTIONS
STEP 1
STEP 3
STEP 2
FURNITURE TIPPING RESTRAINT
WARNING
Injury may result from tipping furniture.
This restraint may protect against tipping furniture.
Do not allow children to climb on furniture.
This restraint is not a substitute for proper adult supervision.
Failure to detach this restraint before moving the furniture may result in injury and damage.
This tip restraint must be attached to a wall
stud using long screw enclosed.
Attach a bracket securely to the back top rail of
the furniture using short screw provided, through
the smaller hole.
Place the furniture into position so both mounting brackets are vertically in line. Lace the end of the
restraint strap through the larger hole in each mounting bracket. Bring both ends together and slide
Locate the other bracket on the wall over a wall
stud and two inches below the mounting bracket
secured to the back of the furniture. Attach the
wall stud using the long screw provided, through
the smaller hole.
WALL
WALL
Confirm that the strap is securely laced and locked.
COASTERFURNITURE.COM
PAGE 5 OF 5
ITEM: 22358 2

COASTERFURNITURE.COM
Inner Size of Drawer A : 19.25"W X 12.50"D X 2.50"H X 0.25"T
Inner Size of Drawer B : 19.25"W X 13.00"D X 5.00"H X 0.25"T
Note : Dimension tolerance ±5%
20.00"11.50"
4.00"
17.75"25.75"
29.75"
20.75"
4.00"
A
B
B
8.25"
ITEM: 22358 2