Cochlear Baha remote control 2 User manual

Quick guide for Baha® sound processor users
Cochlear™ Baha® Remote Control 2
Check with your hearing healthcare professional whether
your sound processor has been paired with your Remote
Control 2. Previously paired sound processors do not need
to be paired again. If your sound processor is not pre-paired,
see below for instructions on how to easily pair it with your
Remote Control 2.
Allows you to discreetly adjust your Baha sound processor
Provides large buttons for simple volume or programme changes
Allows you to monitor your or your child’s sound processor
Makes streaming to other wireless accessories easy
Note: The Baha Remote Control 2 can be paired to two Baha sound
processors for those with a bilateral fitting.
ON/OFF control Sound processor
microphone mute
Streaming
(optional TV
Streamer or Mini
Microphone)
Home button Program change
Display
Increase volume
Decrease volume
Select left Sound
Processor only
Pairing button
Select right Sound
Processor only
Before using your Remote Control 2, you need to fully charge the
battery. To charge it, plug in the charging cable as shown to the
right. Then plug the other end into a power outlet. During charging
the bars in the battery meter will be showing one, two and three
bars continuously. When fully charged all three bars will be shown
continuously.
Benefits of your Cochlear Baha Remote Control 2
Product overview Get started
Charging the Battery

Quick guide for Baha® sound processor users
Cochlear™ Baha® Remote Control 2
To turn your Remote Control 2 ON slide the switch on the side of the Remote Control 2 down to the ON position.
A white ”I” icon will be visible on the base of the switch and the display will turn on.
To turn your Remote Control 2 OFF, slide the ON/OFF switch up to the OFF position.
Turning your Remote Control 2 ON and OFF
Select your left or right sound
processor if you use 2 sound
processors.
Switching between sidesActivate streaming
Home: Stop streaming and
return to program 1 and default
volume settings
Stop streaming and return
to the last used program and
volume settings
Deactivating streaming
The batteries are low in the
Baha sound processor and need
to be replaced:
In the left
sound
processor.
In the right
sound
processor.
Remote Control 2 displays
Everyday
Everyday
If your sound processor is
paired with more than one
wireless accessory press once,
twice, or three times to toggle
between the accessories. If you
cannot connect to your wireless
accessory, move closer to it and
try again.
A
Left and right streaming volume
selected.
The Phone Clip is active.
TVEveryday
Using your Cochlear Baha Remote Control 2
Connected to streaming device.
A
Left and right hearing
instrument volume selected.
The battery is low in the Remote
Control 2 and need to be charged.
Noise
A
No streaming device found.
A

Quick guide for Baha® sound processor users
Cochlear™ Baha® Remote Control 2
Cochlear Bone Anchored Solutions AB Konstruktionsvägen 14, 435 33 Mölnlycke, Sweden
Tel: [phone] Fax: [phone]
www.cochlear.com
Make sure the Remote Control 2 is fully charged and is turned ON.
Cochlear, 科利耳, コクレア, 코클리어, Hear now. And always, Nucleus, Kanso, Baha, the elliptical logo, and marks bearing an ® or ™ symbol, are either trademarks or registered
trademarks of Cochlear Limited or Cochlear Bone Anchored Solutions AB (unless otherwise noted). © Cochlear Bone Anchored Solutions AB 2019. All rights reserved. MAR19.
B1. The ‘search’ icon will display on the screen and the
Remote Control will now be in pairing mode for 20 seconds.
2. While pairing mode is active, switch on your sound processor.
Connected to left
sound processor.
Note! If you have two sound processors, repeat step A to C.
Searching for right
sound processor.
Everyday
C1. Successful pairing will be indicated by an audible
melody played in the sound processor.
2. Searching and connecting to the sound processors.
Pairing with your Baha Sound Processor
A1. Switch off your Baha sound processor.
2. Press the pairing button on the Remote Control
once using the tip of a pen or similar object.
Searching for both
sound processors.
Support
For full details about the Cochlear Baha Remote Control 2,
please refer to the User Manual.
For full details about the Cochlear Baha sound processor,
please refer to the User Manual part A.
Visit www.cochlear.com to learn about our
full range of apps and wireless accessories.
Cochlear Wireless Accessories are compatible with select Cochlear sound processors. See www.cochlear.com for full compatibility details.
Not all products are available in all markets. Product availability is subject to regulatory approval in respective markets.
630671-3