Cochlear Nucleus Kanso 2 User manual

Kanso®2SoundProcessor
User Guide
CP1150
D1694826_1-02_EN_CP1150_UG_Radio-Cert_JAPAN.indd 1 16/12/2019 3:54:00 PM

II KANSO®2 SOUND PROCESSOR USER GUIDE
About
Your Cochlear™ Kanso® 2 Sound Processor (model
number: CP1150) works with your Cochlear implant to
transfer sound to your ear.
You can control your processor by:
• using the Nucleus®Smart App
• tapping on the front – see page 6
• using a Cochlear CR310 Remote Control (optional).
Information on using the app or remote is available in their
user guides.
D1694826_1-02_EN_CP1150_UG_Radio-Cert_JAPAN.indd 2 16/12/2019 3:54:00 PM

KANSO®2 SOUND PROCESSOR USER GUIDE 1
1 Microphone ports
2 Indicator light
3 Cochlear logo
4 Cover
Kanso®2 Sound Processor
Back
Front
1 Magnet
2 Socket cover
1
2
4
3
1
2
D1694826_1-02_EN_CP1150_UG_Radio-Cert_JAPAN.indd 1 16/12/2019 3:54:00 PM

2 KANSO®2 SOUND PROCESSOR USER GUIDE
Charge your processor
To recharge your processor you can:
• place it in the Home Charger for charging overnight or
• attach it to the Portable Charger (optional accessory)
for charging while you’re on the go.
More information and warnings are available in the
Chargers User Guide.
Portable Charger
Home Charger
D1694826_1-02_EN_CP1150_UG_Radio-Cert_JAPAN.indd 2 16/12/2019 3:54:00 PM

KANSO®2 SOUND PROCESSOR USER GUIDE 3
Tapping
CONTROL NUMBER OF TAPS
Turn ON Double-tap – 2 taps
Turn OFF Triple-tap – 3 taps
Change program or audio source Double-tap – 2 taps
• Tap on the Cochlear logo.
• Use quick, firm taps – don’t press.
TIP
You can tap your processor while it is on or off your implant.
D1694826_1-02_EN_CP1150_UG_Radio-Cert_JAPAN.indd 3 16/12/2019 3:54:00 PM

4 KANSO®2 SOUND PROCESSOR USER GUIDE
Turn on and off
On: Double-tap (2 taps).
Light flashes green as the processor turns on.
Off: Triple-tap (3 taps).
Light changes to steady orange as the processor turns off.
NOTE
Sound processor automatically turns on when placed on your
implant and turns off when removed from your implant for two
minutes (if enabled by clinician).
D1694826_1-02_EN_CP1150_UG_Radio-Cert_JAPAN.indd 4 16/12/2019 3:54:00 PM

KANSO®2 SOUND PROCESSOR USER GUIDE 5
Change program
Double-tap (2 taps) to change program.
Light flashes green as the program changes.
Number of green flashes or beeps indicates the selected
program.
NOTE
If double-tap to control audio sources is enabled you will be
unable to double-tap to change progam. The Nucleus Smart App
User Guide has information on where to change this setting.
D1694826_1-02_EN_CP1150_UG_Radio-Cert_JAPAN.indd 5 16/12/2019 3:54:00 PM

6 KANSO®2 SOUND PROCESSOR USER GUIDE
Stream audio
Double-tap (2 taps) to switch between audio sources.
Light flashes blue as the audio source changes.
Number of blue flashes or beeps indicates the selected
program.
NOTE
If double-tap to control programs is enabled you will be unable
to double-tap to change audio source. The Nucleus Smart App
User Guide has information on where to change this setting.
Each time you double-tap the processor, available audio
sources are presented in order.
DOUBLETAP AUDIO SOURCE
1st Processor microphone audio
2nd Wireless accessory 1
3rd Wireless accessory 2
4th... Processor microphone audio...
D1694826_1-02_EN_CP1150_UG_Radio-Cert_JAPAN.indd 6 16/12/2019 3:54:00 PM

KANSO®2 SOUND PROCESSOR USER GUIDE 7
Attach your processor
Place the processor on your implant with the:
• Cochlear logo, light and microphone ports facing up
• straight edge facing down.
CAUTIONS
• Make sure you position your processor correctly to get the best
performance, and so it does not fall off the implant.
• If you have two implants, you must use the correct sound
processor for each implant.
D1694826_1-02_EN_CP1150_UG_Radio-Cert_JAPAN.indd 7 16/12/2019 3:54:01 PM

8 KANSO®2 SOUND PROCESSOR USER GUIDE
Attach a SoftWear pad
If you experience discomfort, attach an adhesive Cochlear
SoftWear™pad to back of processor.
D1694826_1-02_EN_CP1150_UG_Radio-Cert_JAPAN.indd 8 16/12/2019 3:54:02 PM