CoCo TMT-502 User manual

UNIT ON OFF
TIMER
CLOCK ENTER / DEL.
1 2
3
4
5
6
7
8 9
1
0
1 11 2
UNIT
1S
ON
OFF
6
7
8
4
9
1
3
10
1S
ON
OFF
2
UNIT
1 2
3
4
5
6
7
8 9
1
0
1 11 2
5
1. Memory sets, Max: 12 sets
2. Time: 24 hour display
3. The setting time of indicated
receiver for "ON" display
4. The setting time of indicated
receiver for "OFF" display
5. For security and anti-burglar
6. Timer setting "ON" and "OFF" at
one time mode
7. Timer setting "ON" and "OFF" for
daily cycle mode.
8. Battery low display
9. Unit code display; For 16 units of
indicated receivers.
10. ON/OFF transmission signal
Indicator
Function
Specification
!
!
!
!
!
!
!
Wireless Remote Timer
12 memory sets for timer; LED power indicator
Easy to use, convenient and rich you life.
Different setting modes are selectable: One time, daily, and random Security.
Frequency: 433.92MHz
Battery: 3V CR 2032 Lithium for LCD power
1 x 12v A23 for timer transmission.
Remote control distance: 30 M
UNIT
ON
OFF
TIMER
CLOCK
ENTER
/ DEL.
The select button of unit code on TX
To remote the receiver "ON"
To remote the receiver "OFF"
Timer setting ane view button
To select up
To select down
For setting time as the clock
Enter and confirm
Delete and pause function
BUTTON DESCRIPTION
How to use?
REPLACE THE BATTERY
AC
E
G
I
K
M
OAC
E
G
I
K
M
OAC
E
G
I
K
M
O
LITHIUM BATTERY
CR2032
3V
BATTERY 23A 12V
CLOCK SETTING
The Remote Control Timer display the time in 24 hours mode.
Before proceeding the programming the timer, you will need to set the
Correct time.
Press " " button 3 seconds, the digits on LCD display will
be blink.
Use " " button
Once again repeat the above action to set the minute and press ".
The timer is programmed.
!
!
!
CLOCK
to set the hour. Press " " button
confirm the correct hour.
"confirm the correct minute.
ENTER
ENTER
WIRELESS REMOTE TIMER MANUAL
Model No.:TMT-502

Timer Setting
Before timer setting, please adjust the timer house codes as the indicated receiver house code.
AC
E
G
I
K
M
O
UNIT ON OFF
TIMER
CLOCK ENTER / DEL.
UNIT UNIT UNIT
UNIT ON OFF
TIMER
CLOCK ENTER / DEL.
UNIT ON OFF
TIMER
CLOCK ENTER / DEL.
One Time Setting
Wireless ON/OFF remote controller
!
!
!
Press " " button select to the unit of receiver that you need and press "
Press " " button, the unit of receiver will turn on, the indicator will show up.
Press " " button, the unit of receiver will turn off, the indicator will show up.
UNIT
ON
OFF
ENTER" button.
Wireless Dimmer Remote Co
Press " " button select to the unit of receiver that you need and press "
Press " " button twice for dimming. The receiver for lighting will turn un; the indicator will show up.
Press " " button again. The receiver of light stops at the brightness that you need. The indicator will show up.
Press " " button, the unit of receiver will turn off, the indicator will show up.
ntroller
!
!
!
!
UNIT
ON
ON
OFF
ENTER" button.
Daily timer Setting
!
!
!
!
Press " " 3 seconds, the digits on LCD display will show up (Fig 1.)
The memory sets will blink. Using " "
Press " " button and choose that you need. and press " "button and then the ON digits on LCD display will blink(Fig 3),
please use " "
" " button to select the
The OFF digits on LCD display will blink, please use " "
" " button to select the
" " button to select the mode that you need and press" " button to confirm and program (Fig 6).
TIMER
UNIT ENTER
ENTER
button to select on that you need and press" " button to confirm (Fig 2.)
button to select the hur and press" " button to confirm (Fig 4).
Using min and press " " button to confirm(Fig 4).
button to select the hur and press" " button to confirm.
Using min and press " " button to confirm(Fig 5).
Select the mode: use
Now the timer is programmed now.
ENTER
ENTER
ENTER
ENTER
ENTER
!
!
UNIT ON OFF
TIMER
CLOCK ENTER / DEL.
1 2
3
4
5
6
7
8 9
1
0
1 11 2
UNIT
1S
ON
OFF
3 seconds
UNIT UNIT
1 1
S S
ON ON
OFF OFF
UNIT ON OFF
TIMER
CLOCK ENTER / DEL.
1 2
33
4
5
6
7
8 9
1
0
1 11 2
UNIT ON OFF
TIMER
CLOCK ENTER / DEL.
1 1
S S
ON ON
OFF OFF
33
UNIT UNIT
UNIT UNITON ONOFF OFF
TIMER TIMER
CLOCK CLOCKENTER ENTER/ DEL. / DEL.
1S
ON
OFF
3
UNIT
UNIT ON OFF
TIMER
CLOCK ENTER / DEL.
1 1 1
S S S
ON ON ON
OFF OFF OFF
333
UNIT UNIT UNIT
UNIT UNIT UNITON ON ONOFF OFF OFF
TIMER TIMER TIMER
CLOCK CLOCK CLOCKENTER ENTER ENTER/ DEL. / DEL. / DEL.
111 SSS
ON ONONON
OFF OFFOFFOFF
3333
UNIT UNITUNITUNIT
UNIT UNITUNITUNIT ON ONONON OFF OFFOFFOFF
TIMER TIMERTIMERTIMER
CLOCK CLOCKCLOCKCLOCK ENTER ENTERENTERENTER / DEL. / DEL./ DEL./ DEL.
S
1
1 2
3
4
5
6
7
8 9
1
0
1 11 2
UNIT
S
ON
ON ON
OFF
OFF OFF
33
UNIT UNIT
UNIT UNIT UNITON ON ONOFF OFF OFF
TIMER TIMER TIMER
CLOCK CLOCK CLOCKENTER ENTER ENTER/ DEL. / DEL. / DEL.
Fig 1.
Fig 6.
Fig 5.
Fig 4.
Fig 3..
Fig 2.

More than one time Control
You can set max 12 times for the indicated receivers in a day. For example:
The memory set totally has 12 sets .
1. If you have 3 receivers, and you set up 2 times "ON/OFF" on 1 receiver. The memory sets has rest 10 sets. You can set up
10 times in other indicated receivers.
2. If you have 4 receivers. You can set up 1 time "ON/OFF" in indicated receiver A. Set up 2 times "ON/OFF" on indicated
receiver B. Then you will rest 9 sets available to set up.
Pause Function of Timer
Delete Function of Timer
!
!
!
!
!
!
!
Press " " button 3 seconds, use" " button to select the set number that you need on display.
Press" " button and press " " the pause function start.
Backing to the main menu, the selected set will be blocked.
Press" " button again and press " " button, return to the timer function.
Press " " button 3 seconds, use " " button to select the set number that you need on display.
Press " " button for 3 seconds, the setting time and unit on display will blink.
Press " " button, the setting has deleted.
TIMER
ENTER
ENTER
TIMER
\ DEL.
ENTER
Note:
Do not expose this product to excessive heat, direct sunlight or moisture.
Do not drop this product from the upside
If the Remote Control Timer is not used for a period f time, the battery may become flat.
!
!
!
Replace fresh 3V CR2032 Lithium
1.Please check the LCD battery power
2.After replace the fresh battery, the displace doesn't show, please
send it back to the agent.
1.Please check the LCD battery power
2.After replace the fresh battery, the displace doesn't show, please
send it back to the agent.
Please check 12 V battery.
Please check the battery power and replace fresh battery.
Digits not clear
No display
Short distance
No indicator
signal
Low power
Troubleshooting