Codonics Virtua User manual

VirtuaTM Reference Guide

1
Table of Contents
Components ........................................................................................................................................... 2
Assembly................................................................................................................................................. 6
Startup.................................................................................................................................................... 13
Shutdown .............................................................................................................................................. 14
Media Loading...................................................................................................................................... 15
Configuration ........................................................................................................................................ 18
DICOM Host Setup ............................................................................................................................. 26
Software Installation ........................................................................................................................... 27

Virtua Reference Guide 2
Components
1. Display
2. Display Arm
3. Front Cover
4. Recorder
5. Controller
6. Output Bin

3
7. Ink Carriages
8. CD/DVD Recorders
9. Eject Ramp
10. Ink Cartridge Load Button
11. Robotic Disc Transporter
12. Printer Tray
13. Input Bins
14. Controller Soft Power Button
15. Flash card reader/USB-2 Port
16. Status Indicators
17. SmartDrive USB Port
18. SmartDrive

Virtua Reference Guide 4
19. Display/exit on-screen menus
20. Menu up and down
21. Contrast and Brightness Settings
22. Power Switch
23. Voltage Selection Switches
(VIRTUA-1-PS1 model only)
24. Power Input Ports
25. Hard Power Switches

5
26. VGA connector
27. USB 2.0 connectors
28. Ethernet connector
29. Display Fuse
30. Display Power connector
31. Recorder USB 2.0 Connector

Virtua Reference Guide 6
Assembly
Place Controller on solid level surface
Remove cardboard insert (Remove foam piece if present)

7
Place Recorder on Controller
(Note offset to avoid finger pinch)
Center Recorder on Controller

Virtua Reference Guide 8
Assemble Display by attaching Display Arm to the Display using the 4 thumbscrews
Attach Display Arm with Thumbscrews to Controller

9
Tighten Thumbscrews with fingers
Attach Display cables (VGA, USB, Power)
Connect the DC Power, USB and VGA cables from the Display Arm to the Display Ports

Virtua Reference Guide 10
Attach Recorder USB cable
Set 115V/230V Voltage Selector Switch
(Voltage Selector Switch on VIRTUA-1-PS1 model only)

11
Connect “Y” power cable
(Ferrite on VIRTUA-1-PS1 model only)
Install SmartDrive

Virtua Reference Guide 12
Install Output Bin
Install Input Bins

13
Startup
1. Set Power Switches ON (Top power switch first)
2. Press Controller Soft Power Button
3. Wait 3 minutes for startup to complete

Virtua Reference Guide 14
Shutdown
1. Touch Log Out button
2. Touch Shutdown button
3. Touch Shutdown button
4. Wait 1 minute for shutdown to complete

15
Media Loading
1. Press Ink Cartridge Load Button
2. Open Ink Carriage (Color Shown)

Virtua Reference Guide 16
3. Remove Ink Cartridge Tape
4. Install Ink Cartridge (Color shown)

17
5. Close Ink Carriage (Color shown)
6. Load discs (white side up)

Virtua Reference Guide 18
Configuration
On Screen Keyboard allows character input from Display.
1. Touch characters
2. Displays typed characters
3. Press OK when done
Log In
1. Touch Username field. Type “admin”
2. Touch Password field. Type “codonics”
3. Touch Log In

19
Set Network
1. Touch Setup button
2. Touch Network tab
3. Touch Static button
4. Enter IP Address
5. Enter Subnet Mask
6. Enter Gateway
7. Touch Save button