Argos Murano 330/8448 Datasheet

Assembly lnstructions - Please keep for future reference
Murano Bedside Table
Depth- 35 cm
Width - 43 cm
Height - 60 cm
Dimensions
If you need help or have damaged or missing parts, call the Customer Helpline: 0345 6400 800
Important - Please read these instructions fully before starting assembly
Issue 1- 02-12-14
330/8448

Important - Please read these instructions fully before starting assembly
Check you have all the
components and tools listed on
pages 2 and 3.
Remove all fittings from the
plastic bags and separate them
into their groups.
Keep children and animals
away from the work area, small
parts could choke if swallowed.
Make sure you have enough
space to layout the parts before
starting.
Assemble the item as close
to its final position (in the same
room) as possible.
Assemble on a soft level
surface to avoid damaging the
unit or your floor.
Assembly requires 2 people.
Do not fully tighten bolts until
the whole bed is assembled.
Do not overtihgten the nuts to
avoid causing damage to the
threads.
We do not
recommend the
use of power
drill/drivers for
inserting screws,
as this could damage the unit.
Only use hand screwdrivers and
Allen keys.
Dispose of all packaging
carefully and responsibly.
Glass safety
Safety and Care Advice
PRODUCT INFORMATION
The glass used with this product is annealed mirror glass of a
nominal thickness of 3 mm. It is not required to comply with BS6206.
If a glass component is chipped or broken, replace with glass of the
type described on this label. Consult the manufacturer, retailer or
agent with regard to obtaining a manufacturing specification and
shape for replacement glass quoting the model number and batch
number or date of manufacture.
Imported by:
Home Retail Group
489-499 Avebury Boulevard
Central Milton Keynes
MK9 2NW
CAT No: 330/8448
This product complies with FIRA/FRQG G0001:2012
P/O No: 54424220141014
1

Components - Parts
2
lf you have damaged or missing components.
call the Customer Helpline: 0345 6400 800
2Drawer (27.5 x 33 x 13cm) x 2
(Handles pre-assembled inside)
1Main body x 2
(35 x 43 x 60 cm)

3
0345 6400 800
BA
Ruler - Use this ruler to help correctly identify the screws
0 5 10 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90 95 100 105 110 115 120 125 130 135 140 145 150 155 160 165 170
Tools required
0
0 5 10 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90 95 100 105 110 115 120 125 130 135 140 145 150
1 2 3 4 5 6
Ruler/tape
measure
Components - Fittings
4 x 22 mm Screw x 2 15 mm Dia Flat washer x 2
Drawer Handle x 2
C
Phillips
screwdriver
(Not supplied)
All pre-assembled inside drawers
18mm Dia Plastic washer x 2
D
A-D

4
Assembly Instructions
Attaching handles
a: Pull out the drawer.
b: Remove handles
that have been
pre-assembled inside the
drawers.
D
c: Re-secure handles
to the outside of the
drawers using fixings
and .
Plastic washers
are located in between
the mirror front and the
handle.
D
A
B
2
a:
A
B
D
b:
Inside
drawer
c:
C
2
2
1
C
2
A
B
D
Inside
drawer
C
C

5
Assembly Instructions
If you need help or have damaged or missing parts, call the Customer Helpline: 0345 6400 800
Home Retail Group. 489-499 Avebury Boulevard. Saxon Gate West. Central Milton Keynes. MK9 2NW

Assembly lnstructions - Please keep for future reference
Murano 5 Drawer Chest
Depth - 50 cm
Width - 92 cm
Height - 122 cm
Dimensions
If you need help or have damaged or missing parts, call the Customer Helpline: 0345 6400 800
Important - Please read these instructions fully before starting assembly
Issue 1- 03-12-14
332/6138

Important - Please read these instructions fully before starting assembly
Check you have all the
components and tools listed on
pages 2 and 3.
Remove all fittings from the
plastic bags and separate them
into their groups.
Keep children and animals
away from the work area, small
parts could choke if swallowed.
Make sure you have enough
space to layout the parts before
starting.
Assemble the item as close
to its final position (in the same
room) as possible.
Assemble on a soft level
surface to avoid damaging the
unit or your floor.
Assembly requires 2 people.
Do not fully tighten bolts until
the whole bed is assembled.
Do not overtihgten the nuts to
avoid causing damage to the
threads.
We do not
recommend the
use of power
drill/drivers for
inserting screws,
as this could damage the unit.
Only use hand screwdrivers and
Allen keys.
Dispose of all packaging
carefully and responsibly.
Glass safety
Safety and Care Advice
1
PRODUCT INFORMATION
The glass used with this product is annealed mirror glass of a
nominal thickness of 3 mm. It is not required to comply with BS6206.
If a glass component is chipped or broken, replace with glass of the
type described on this label. Consult the manufacturer, retailer or
agent with regard to obtaining a manufacturing specification and
shape for replacement glass quoting the model number and batch
number or date of manufacture.
Imported by:
Home Retail Group
489-499 Avebury Boulevard
Central Milton Keynes
MK9 2NW
CAT No: 332/6138
This product complies with FIRA/FRQG G0001:2012
P/O No: 54424020141014
Wall fixing
It is essential that this unit is
securely fixed to a wall!
Installation should only be
carried out by a competent
person, using suit able tools in a
safe manner.
Before securing this item to the
wall, please ensure the fixings
you intend to use are suitable
for your wall type, and will
safety secure the weight of the
unit, plus any future contents.
Please be reminded of the
dangers that may arise, if it is
not correctly installed.

Components - Parts
2
lf you have damaged or missing components.
call the Customer Helpline: 0345 6400 800
2Drawer (72.5 x 39.5 x 18cm) x 10
(Handles pre-assembled inside)
1Main body
(50 x 92 x 122 cm)
2
2
2
2
2
1

3
BA
Ruler - Use this ruler to help correctly identify the screws
0 5 10 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90 95 100 105 110 115 120 125 130 135 140 145 150 155 160 165 170
Tools required
0
0 5 10 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90 95 100 105 110 115 120 125 130 135 140 145 150
1 2 3 4 5 6
Ruler/tape
measure
4 x 22 mm Screw x 10 15 mm Dia Flat washer x 10
C
Drawer Handle x 10
Phillips
screwdriver
(Not supplied)
All pre-assembled inside drawers
ED F
18mm Dia Plastic washer x 10
Wall strap x 2
7x16mm Screw x 2
0345 6400 800
Components - Fittings
A-D

4
Assembly Instructions
Attaching handles
a: Pull out the drawers.
b: Remove handles
that have been
pre-assembled inside the
drawers.
D
c: Re-secure handles
to the outside of the
drawers using fixings
and .
D
A
B
a:
b:
c:
C
2
2
2
2
2
1
Inside
drawer
2
ABInside
drawer
D
2
C
A
B
C
D
C
ABC
D
C
D
A
B

5
Assembly Instructions
If you need help or have damaged or missing parts, call the Customer Helpline: 0345 6400 800
Home Retail Group. 489-499 Avebury Boulevard. Saxon Gate West. Central Milton Keynes. MK9 2NW
Fixing the wall
Assemble wall straps
to the back of the unit
using screws .
F
E
With help, move the unit to
the desired location.
Mark the fixing hole
locations on the wall and
remove the unit.
Drill the wall and fit suitable
plugs for your wall type.
Note: Wall plugs are not
supplied.
Re-position the unit and
secure the wall straps to
the wall.
hidden pipes or cables.
Warning: Before
drilling. Check the wall for
E
E
F
F

Assembly lnstructions - Please keep for future reference
Murano Dressing Table
Depth - 40 cm
Width- 80 cm
Height - 75 cm
Dimensions
If you need help or have damaged or missing parts, call the Customer Helpline: 0345 6400 800
Important - Please read these instructions fully before starting assembly
Issue 1- 03-12-14
355/0241

Important - Please read these instructions fully before starting assembly
Check you have all the
components and tools listed on
pages 2 and 3.
Remove all fittings from the
plastic bags and separate them
into their groups.
Keep children and animals
away from the work area, small
parts could choke if swallowed.
Make sure you have enough
space to layout the parts before
starting.
Assemble the item as close
to its final position (in the same
room) as possible.
Assemble on a soft level
surface to avoid damaging the
unit or your floor.
Assembly requires 2 people.
Do not fully tighten bolts until
the whole bed is assembled.
Do not overtihgten the nuts to
avoid causing damage to the
threads.
We do not
recommend the
use of power
drill/drivers for
inserting screws,
as this could damage the unit.
Only use hand screwdrivers and
Allen keys.
Dispose of all packaging
carefully and responsibly.
Glass safety
Safety and Care Advice
1
PRODUCT INFORMATION
The glass used with this product is annealed mirror glass of a
nominal thickness of 3 mm. It is not required to comply with BS6206.
If a glass component is chipped or broken, replace with glass of the
type described on this label. Consult the manufacturer, retailer or
agent with regard to obtaining a manufacturing specification and
shape for replacement glass quoting the model number and batch
number or date of manufacture.
Imported by:
Home Retail Group
489-499 Avebury Boulevard
Central Milton Keynes
MK9 2NW
CAT No: 355/0241
This product complies with FIRA/FRQG G0001:2012
P/O No: 54424320141014
Wall fixing
It is essential that this unit is
securely fixed to a wall!
Installation should only be
carried out by a competent
person, using suit able tools in a
safe manner.
Before securing this item to the
wall, please ensure the fixings
you intend to use are suitable
for your wall type, and will
safety secure the weight of the
unit, plus any future contents.
Please be reminded of the
dangers that may arise, if it is
not correctly installed.

Components - Parts
2
lf you have damaged or missing components.
call the Customer Helpline: 0345 6400 800
1(80 x 40 x 18 cm) 2
(5.8 x 5.8 x 72 cm)
Table top (with drawers) Legs (back) x 2
3
(5.8 x 5.8 x 72 cm)
Legs (front) x 2

3
0345 6400 800
B CA
Ruler - Use this ruler to help correctly identify the screws
0 5 10 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90 95 100 105 110 115 120 125 130 135 140 145 150 155 160 165 170
Tools required
0
0 5 10 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90 95 100 105 110 115 120 125 130 135 140 145 150
1 2 3 4 5 6
Ruler/tape
measure
Components - Fittings
4 x 22 mm Screw x 2
18 mm Dia Flat washer x 8
Allen key x 1
ED
Drawer Handle x 2
All pre-assembled inside drawers
A-D
F
G
Wall strap x 27x16mm Screw x 2
Phillips
screwdriver
(Not supplied)
H J
M8 x 30 mm Allen screw x 8
18mm Dia Plastic washer x 2
15 mm Dia Flat washer x 2

4
With help, carefully place
table top upside down
onto a clean flat surface.
Warning: The top is
heavy and fragile. Lift and
handle with care.
Remove the 2 drawers
from the table top.
Assembly Instructions
Assembling legs
Carefully locate back legs
and front legs in to
each corner of table top
.
Note: Ensure the legs are
located as shown.
1
Preparing top
23
1
1
1
2
3
2
3

5
Securing legs
Secure the legs using
fixings and .
Note: Do not overtighten.
Assembly Instructions
EF
D
A
B
Inside
drawer
1
3
2
E
F
D
C
Remove
D
CInside
drawer
A
Re-assemble
B
23
1
3
F
E
C
D
C
B
A

6
Assembly Instructions
If you need help or have damaged or missing parts, call the Customer Helpline: 0345 6400 800
Home Retail Group. 489-499 Avebury Boulevard. Saxon Gate West. Central Milton Keynes. MK9 2NW
Finishing assembly
Carefully re-locate the
drawers into top .
1
Fixing the wall
Carefully turn the table
over into the standing
position.
Warning: The table
is heavy and fragile.
Handle with care.
Assemble wall straps to
the back of the unit using
screws .
H
G
With help, move the table
to the desired location.
Mark the fixing hole
locations on the wall and
remove the unit.
Drill the wall and fit suitable
plugs for your wall type.
Note: Wall plugs are not
supplied.
Re-position the table and
secure the wall straps to
the wall.
hidden pipes or cables.
Warning: Before
drilling. Check the wall for
G
H
G
H