Comica CVM-V30 LITE User manual

USER MANUAL
Super Cardioid Condenser Lite Microphone
CVM-V30 LITE

Foreword
Thanks for purchasing COMICA CVM-V30 LITE Super-cardioid
condenser lite microphone.
Comica CVM-V30 LITE Super-cardioid condenser lite microphone,
suit for camera, smartphone. Meanwhile the Microphone is
designed with excellent shock mount, no battery drive, super low
noise electronics, super anti-interference, cold-shoe design with
1/4 thread at the bottom, compact and light. which makes
recording more easier.
Please read this manual carefully before using. This product has
been precisely calibrated at the factory, do not assemble and
disassemble parts by yourself.
1

Notice
When used with smartphone, please purchase separate audio
cable adapter with corresponding interface.
For the Android system smartphone, the microphone works
well in default audio mode, but default video mode will happen with
incompatibility trouble while working with some smartphone;
(Then we suggest you try the 3rd party’s video APP);
For the iOS system phone, the microphone works well in all default
audio mode , video mode, and 3rd party’s APP.
Please do not put the device beside the heat or interference
source.
Please avoid falling, collision or pounding during usage.
Don’t expose the device in rain or moist environment .
2

Main Features
.Super-Cardioid Polar Pattern
.Support Smartphone & Camera
.Excellent Shock Mount
.No Battery Drive Design
.Super Low Noise Electronics
.Super Anti-interference
.Cold-shoe Design with 1/4 Thread at the Bottom
.Compact and Light, Easy to Carry
Package Content
Microphone User Manual Warranty Card
Super
Anti-Interference
Support
Camera&Smartphone Excellent Shock-absorbing
Super-CardioidLow Self-noise
3
USER MANUAL
Super Cardioid Condenser Lite Microphone
CVM-V30 LITE

Components Introduction
Microphone
Microphone Interference Tube
Shock Mount
Locking Screw
Cold-shoe Bracket
1/4 Screw Hole
Smartphone/Camera switch
3.5mm Audio Output Line
1
2
3
4
5
6
7
1
2
6
3
4
5
7
4

Installation and Operation
1.Use with Camera
1.1 Attach the microphone cold shoe bracket to the camera, fasten
the Locking Screw .
5

1.2 Connect the microphone’s 3.5mm audio output line and Camera.
6

1.3 Set the smartphone/camera switch to the left camera mark.
switch to the left camera mark
7

2. Use with Smartphone
2.1 Mount microphone cold shoe bracket to accessories with cold
shoe interface (recommended VF-H1 ), fasten the Locking
Screw.
8

2.2 Connect the microphone’s 3.5mm audio output line and
smartphone.
9

2.3 Set the smartphone/camera switch to the right smartphone mark.
switch to the right smartphone mark
10

Tech Parameters
Polar Pattern
Frequency Range
Output Impedance
Max.SPL
Sensitivity
Signal to Noise Ratio
Weight
Dimension
Super Cardioid
40Hz~20KHz
2.2kΩ
>100dB
-34dB±3dB
>68dB
52g
160*50.8*86mm
0
180
30330
150210
60300
120240
90270
11

Email: [email protected]