Commercial Electric HPLA11CWB User manual

THANK YOU
USER GUIDE
Smart Socket
We appreciate the trust and confidence you have placed in Commercial Electric
through the purchase of this Smart Socket. We strive to continually create quality
products designed to enhance your home. Visit us online to see our full line of
products available for your home improvement needs. Thank you for choosing
Commercial Electric!
Item #1006367938
Model #HPLA11CWB

WARNING: SUITABLE FOR OUTDOOR AND WET LOCATIONS. DO NOT
IMMERSE IN WATER.
The max load of the device is 60W under LED bulbs. To avoid
damage, do not exceed the 60W LED bulbs. Do not use with
incandescent bulbs. If a direct short is created on the output,
the Smart Socket will be damaged and no longer function. Do
not disassemble the product or make repairs yourself. You
run the risk of electric shock and voiding the limited warranty.
If you need service, please contact Customer Service.
Safety Information
FCC Regulation
Supplier’s Declaration of Conformity
47 CFR § 2.1077 Compliance Information
Responsible Party
Leedarson America, Inc. 300 Technology Court SE Suite 100; Smyrna,
GA 30082 1-678-293-8382
Unique Identifier: HPLA11CWB (SKU # 1006367938)
Contains FCC ID: 2AB2Q-LA02301
This equipment complies with FCC radiation exposure limits set forth
for an uncontrolled environment. This equipment should be installed
and operated with a minimum distance of 20 cm between the
radiator and any part of your body.
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) this device may not
cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause
undesired operation.
-2-

FCC Regulation
Wireless Protocol
expressly approved by the party responsible for compliance could
void the user's authority to operate the equipment.
Note: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This
equipment generates, uses, and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from
—Consult the dealer or an experienced radio/TV technician for help.
Apple and the Apple logos are trademarks of Apple, Inc., registered in
the U.S., and other countries. App Store is a service mark of Apple Inc.
Google and Google Play are trademarks of Google LLC.
-3-

Part Description
a Bulb Scoket (E26)
b Power Button
c Indicator Light
a
bc
1 YEAR LIMITED WARRANTY
Warranty
Package Contents
Part Description Quantity
ASmart Socket 1
B User Guide 1
C Quick Start Guide 1
A B C
This product is guaranteed to be free of defects in
materials and workmanship for 1 year from the date of
purchase. Guarantee does not include normal wear and
tear.
HUBSPACE APP QUICK START GUIDE
-4-
5003280
THANKYOU
USER GUIDE
Smart Socket
Weappreciate the trust and confidence you have placed in Commercial Electric
throughthe purchase of this Smart Socket. We strive to continually create quality
productsdesigned to enhance your home. Visit us online to see our full line of
productsavailable for your home improvement needs. Thank you for choosing
CommercialElectric!
Item#1006367938
Model#HPLA11CWB

Installation
-5-
Screw in the E26 base LED
bulb into the Smart Socket.
Do not insert socket in a row
NOTE:
□
□
□
□
before installation.
Does not work with incandescent, tungsten, or halogen bulb. Only works with LED bulb with
Max. load power 60W.
Install the smart socket with bulb base upwards for outdoor usage.
2.91 in.
1.94 in.

Operation
1Download the Hubspace™ app from the App Store or
the Google Play Store.
NOTE:
□
□
This Hubspace device requires a 2.4GHz Wi-Fi channel. Hubspace only shows Wi-Fi networks
that your device can use.
If you do not see your Wi-Fi network name when you attempt to connect your devices, please
check your router settings or move your product closer to your Wi-Fi router.
3Connect your socket to power and follow the
instructions on the app screen.
2Create an account to sign in or log in if you already
have an account.
4Tap the ‘+’ button in the upper right corner to add your
socket.
NOTE: Bluetooth access is required for device setup.
My Home
-6-

Operation (continued)
LED Indicator
Orange
Quick Blink Off Set up Wi-Fi for the product. If you
have already set up Wi-Fi for this
product, wait for it to connect.
Check the Hubspace app for
connectivity status.
On
Orange/Green
Quick Blink
Wi-Fi is
not
connected.
Specification
6Using your Smart Socket
7
a) Turn your Smart Socket on or off from the Home page on the Hubspace app.
b) To set a schedule or timer, tap the name of the smart socket on the Home
page. You will see options for setting Schedules and Auto-Off Timers.
You can connect your smart socket to Google Home and Alexa from the Hubspace
app. Or, you can sign in to Alexa app or Google Home and connect to your
Hubspace devices from there.
Set up your Voice Assistant
5
Scan the QR code on the socket or in the Quick Start Guide.
NOTE: If the QR code cannot be scanned, you can enter the code manually. Tap Enter Code
and follow the instructions.
-7-
HUBSPACE APP QUICK START GUIDE
LED State Meaning Action To Take
Socket
State

Input 120VAC, 60Hz
Output 120VAC, 60Hz, 60W LED bulb
Maximum load
Network Wireless Type 2.4GHz, IEEE 802.11b/g/n
Operating Temperature -22° F(-30°C)–113° F(45°C)
Operating Humidity 5-85% RH, Non-condensing
FCC, ETL
Certification
Off Off The socket
is off. No action required.
Green On The socket
is on.
Red Off Go to the device settings in the
app and set up WiFi again. Check
that your WiFi Access Point is
allowing the device to join the
network.
Orange On
There is a
WiFi error.
Specification (continued)
You can control any E26 LED bulb (less than
max load 60W) in accordance with the Smart
incandescent, tungsten, or halogen bulb.
Problem Solution
What devices can be
controlled with the
Smart Socket?
Troubleshooting
-8-
LED State Meaning Action To Take
Socket
State

Problem Solution
Troubleshooting (continued)
Make sure your device is connected to a
power source. Your Internet connection or
Wi-Fi network may be down.
Make sure you have a 2.4GHz capable
Wi-Fi network within range of the device
you are trying to add.
I cannot nd the
QR code.
The QR code has become
damaged. How do I add
the device?
A device is on another
account. How do I
transfer it?
Scan the QR code and it will transfer to
your account.
My Hubspace device
is not connecting to
Wi-Fi.
My device cannot nd
any Wi-Fi networks.
My device is in a location
that does not have Wi-Fi.
Can I still use it with the
Hubspace app?
Yes. Use the app on a phone with an
Internet connection like LTE. The phone
must be within Bluetooth range of your
Hubspace device and have Bluetooth
enabled.
It is on the housing. A copy of the
QR code is also included in your device’s
documentation.
Under the QR code are numbers. You can
enter those in manually instead of scanning
the code.
-9-
I lost my QR code. How
do I add a device?
1. Make sure the device is connected to
power.
2. In the Hubspace app, tap +, then Add
Device.
3. On the Scan Device screen, tap the
Search button in the lower right corner.
4. Follow the instructions on-screen.
socket

Can I scan the same QR
code to add multiple
products?
My device is of ine for
long periods of time.
Make sure your Wi-Fi signal strength is
suf cient. You may need to move your
router, use mesh Wi-Fi, or Wi-Fi extenders.
No. Each product has a unique QR code.
Problem Solution
The device is on and I
scanned the QR code,
but the app cannot
connect to it.
Turn off Bluetooth on your phone and turn
it back on. Then, scan the QR code. If the
problem persists, turn your phone off and
on, then try again.
Troubleshooting (continued)
Questions, problems, missing parts? Before returning to the store,
8 a.m. - 7 p.m., EST, Monday-Friday, 9 a.m. - 6 p.m., EST, Saturday
1-877-592-5233
HOMEDEPOT.COM/Hubspace
Retain this manual for future use.
call Hubspace Customer Service