Compex PS2208A User manual

“Quick Install Guide”
Compex
8 Port Dual Speed
Fast Ethernet
Switch
PS2208A
Version 1.3C

Figure 1: PS2208A Top View
Figure 2: Back Panel View of PS2208A
„…
Figure 3: Side View of PS2208A (Magnified)
2 4 5 6 7
1 34567
Figure 4: PS2208A in a Network
A: Workstation to Hub;
B: Hub cascading using Uplinkport.
•
†‡‚
ƒ
BB
A
A
A
PS2208A
PS2208A
8 7 6 5 4 3 2 1

Contents
Diagrams Front Flap
English Text Page 1
ØIntroduction Page 1
ØPackage Contents Page 1
ØHub Features Page 2
ØFeatures Page 2
ØSpecifications Page 2
ØInstallation of PS2208A Page 3
Desktop Installation Page 3
Wall Installation Page 3
ØTroubleshooting Page 4
German Text Page 6
Russian Text Page 11
French Text Page 17
Notes 2nd Last Page
Technical Support Last Page

1Compex 8 Port Dual Speed Fast Ethernet
Switch (PS2208A) English
“Quick Install Guide”
Compex 8 Port Dual Speed Fast Ethernet
Switch (PS2208A)
ØIntroduction
The key features of the Compex 8 Port Dual Speed Fast Ethernet Switch
(PS2208A) are as follows:
♦Provides high-speed switching between 10Base-T Ethernet segments as well as
100Base-TX Fast Ethernet segments.
♦Supports 10Base-T to 100Base-TX connectivity, allowing for progressive
migration from 10Base-T to 100Base-TX technology.
♦Provides high throughput because Switches route data packets to destination port
instead of broadcasting them to all ports. Alleviates congestion for applications
with high-bandwidth requirements such as multimedia applications and large file
transfers.
♦All ports support full auto-negotiation for 10Mbps and 100Mbps speed and half
or full duplex mode connection. Thus, switching between 100Base-TX and
10Base-T networks does not require any manual configuration.
♦Implemented store-and-forward switching scheme prevents the propagation of
erroneous packets.
♦Provides a dynamic memory sharing in/out buffer to ensure fast error free packet
storage and transmission, which greatly improves your network performance.
ØPackage Contents
♦1 PS2208A Unit
♦1 Power Adapter
♦1 Quick Install Guide
♦1 Warranty Card

English Compex 8 Port Dual Speed Fast Ethernet
Switch (PS2208A) 2
ØHub Features (see diagrams on inner cover)
•• Power LED ♦ON indicates hub is receiving power.
‚‚ Port LED ♦STEADY GREEN: 10M Link
♦BLINK GREEN: 10M Activity
♦STEADY AMBER: 100M Link
♦BLINK AMBER: 100M Activity
ƒƒ 8 RJ-45 Ports: ♦8 UTP ports, or 7 ports + 1 Uplink port/Superlink®
port.
„„ Uplink Switch ♦Configure port#1 as Uplink port when set to Uplink.
♦Set port 1 to Normal when slide to LED side.
…… DC Power Jack ♦Jack for connection to an external power adapter (7.5V).
±± MEM OVFLW
LED ♦Memory Overflow LED (Yellow): ON indicates
memory full in switching buffer
²² MEM ERR LED ♦Memory Error LED (Yellow): ON indicates error
occurred in memory.
ØFeatures
♦Separate collision domain on each port allows unrestricted topology
implementation for fast Ethernet networks.
♦Each port implements an intelligent unicast address filtering mechanism and a
simple learning and aging algorithm, this dramatically reduces inter-segment traffic.
♦Comes in a compact desktop unit.
ØSpecifications:
♦Industrial Standards Complies with IEEE 802.3 10Base-T, IEEE 802.3u
100Base-TX and ANSI/IEEE 802.3 N-Way auto-
negotiation standards; FCC Class A; CE mark.
♦Interface: Each unit has eight 10/100Mbps UTP ports (RJ-45).
♦Port Speed/Mode
Selection: Auto-negotiation
♦Link Distance: 100Base-TX: can support up to 100m of ‘Category 5’
UTP cable to PC, Hub or another Switch.
10Base-T: can support up to 100m of ‘Category 3, 4,
and 5’ UTP cable to PC, Hub or another Switch.

3Compex 8 Port Dual Speed Fast Ethernet
Switch (PS2208A) English
♦LED Indicators LED indicators are provided for status monitoring.
These include LEDs for system power, port speed,
traffic activity and link.
♦Dynamic memory
sharing In/Out buffer: 1M Bytes
♦Forwarding Method: Store-and-Forward.
♦Number of MAC
Addresses: 4K MAC Addresses.
♦Dynamic Addresses
Learning/Filtering: Yes.
♦Power Supply: External 7.5VDC, 2.1A.
♦Environment
Requirements: Temperature: Operating: 0°C to 40°C
Storage: -5°C to 60°C
Humidity: Operating: 10% to 90%(non-condensing)
♦Physical Dimensions: 148x 90 x 25mm (L x W x H)
♦Weight: About 0.20 kg
♦Safety: UL, CSA, TUV/GS.
ØInstallation of PS2208A
PS2208A can be installed on a flat surface (desktop) or mounted on a wall. Follow
the steps below for proper installation.
Desktop Installation:
1. Unpack the hub.
2. Choose a location near the devices to be connected and close to an electrical outlet.
3. Set the hub on a desktop or any other clean, smooth, level and sturdy surface.
Make sure there is enough clearance around the unit to allow attachment of
network cables, power adapter and allow air circulation.
4. Connect the power adapter to the hub. The POWER LED and PORT LED for
each connected port should light up.
5. The hub is ready to operate.
Wall Installation:
1. Measure the distance between the mounting holes at the bottom of the hub and
mark the wall to match the location of the mounting holes on the hub.

English Compex 8 Port Dual Speed Fast Ethernet
Switch (PS2208A) 4
2. Drill pilot holes at the two marked locations.
3. Fix two 5/16-inch diameters flat-head mounting screws into the wall, with the
heads of the screws protruded 1/8 inch out from the wall.
4. Carefully set the hub over the screws in the wall; then slide the hub down onto the
screws, pressing it slight to the wall.
5. Connect the power adapter to the hub. The POWER LED and PORT LED for
each connected port should light up.
6. The hub is ready to operate.
ØTroubleshooting
LED Indicators: The Compex Pocket Switch PS2208A is designed with LED
indicators to indicate the operating status such as: Power ON/OFF, Activity/Link
Status and 10/100Mbps connection status. The LEDs function as useful
troubleshooting aids and are found on the front panel of the PS2208A.
LED indicator Description of Function
Power Green LED.
If Power LED does not come ON, check that:
♦Power adapter unit and cord are properly inserted into
the socket and hub.
Port Red LED for 10M connection;
Green LED for 100M connection:
When LED does not turn ON, check that:
♦Wire pair connections at RJ-45 plug are correct.
♦RJ-45 plug is fully inserted until you hear a click
sound.
♦The PC is powered-up.

5Compex 8 Port Dual Speed Fast Ethernet
Switch (PS2208A) English
Disclaimer: Compex, Inc. provides this guide without warranty of any kind, either expressed or
implied, including but not limited to the implied warranties of merchantability and fitness for a
particular purpose. Compex, Inc. may make improvements and/or changes to the product and/or
specifications of the product described in this guide, without prior notice. Compex, Inc. will not be
liable for any technical inaccuracies or typographical errors found in this guide. Changes are
periodically made to the information contained herein and will be incorporated into later versions of
the guide. The information contained is subject to change without prior notice.
Trademark Information: Compex, ReadyLINKand MicroHubare registered trademarks of Compex,
Inc. All brand and product names are trademarks or registered trademarks of their respective owners.
Notice: Copyright ©2001 by Compex, Inc. All rights reserved. Reproduction, adaptation, or
translation without prior permission of Compex, Inc.is prohibited, except as allowed under the
copyright laws. Manual Revision by Xu Xiaojing.
Manual Number: M-0251-V1.3C Version 1.3C, March 2001
FCC NOTICE:
This device has been tested and found to comply with the limits for a Class A
digital device, pursuant toPart 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This device generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no guarantee that interference
will not occur in a particular installation. If this device does cause harmful interference to radio or
television reception, the user is encouraged to try to correct the interference by one or more of the
following measures:
±±
±± Reorient or relocate the receiving antenna.
Connect the computer into an outlet on a
circuit different from that to which the
receiver is connected.
±±
±±
Increase the separation between the
computer and receiver.
Consult the dealer or an experienced
radio/TV technician for help.
Caution: Any changes or modifications not expressly approved by the grantee of this device could
void the user's authority to operate the equipment.
FCC Compliance Statement:This device complies with Part 15 of the FCC Rules. Operation
is subject to the following two conditions:
(1)
(2) This device may not cause harmful interference, and
This device must accept any interference received, including interference that may cause
undesired operation.
DECLARATION OF CONFORMITY: Compex, Inc. declares that the product:
Product Name:Compex 8 Port Dual Speed Fast Ethernet Switch Model Number: PS2208A conforms
to the following Product Standards: Radiated Emission Standards: EN55022A, FCC Part 15 Class A;
Conducted Emission Standards:EN60555Pt2 conducted emission; EN55022A conducted emission,
FCC Part 15 Class A; Immunity Standards: IEC 801-2; IEC 801-3; IEC 801-4, Low Voltage
Directive: EN60950. Therefore, this product is in conformity with the following regional standards:
FCC Class A following the provisions of FCC Part 15 directive; CE Mark following the
provisions of the EC directive.
Manufacturer’s Name:Compex, Inc.
Address: 4051 E. La Palma, Unit A,
Anaheim, CA 92807, USA
European Contact:
ReadyLINK Networktechnology GmbH,
Technical Support
Albert EinsteinStraβe 34 / M21,
63322 Rödermark, Germany
[Fax: ++49 (0) 6074 - 90668]
15th March , 2001
_________________
Mr ShiJia Xiang
Deputy R&D Manager

NOTES

Compex Technical Support
Technical Support Centers
Contact the technical support center that services your location.
U.S.A., Canada, Latin America and South America
*Write Compex, Inc.
4051 E. La Palma, Unit A
Anaheim, CA 92807, USA
(Call
Fax
Tel:
Fax:
BBS:
(714) 630-7302 (8 a.m.-5 p.m. Pacific time)
(714) 630-6521
(714) 630-2570 (24-hour access)
Europe
*Write ReadyLINK Networktechnology Gmbh
Albert Einstein Straβe 34 / M21
63322 Rödermark, Germany
(Call
Fax
Tel:
Fax:
BBS:
49 (0) 6074-98017 (8 a.m.-5 p.m. local time)
49 (0) 6074-90668
49 (0) 6074-93974 (24-hour access)
Asia, Australia, New Zealand, Middle East
and the rest of the World
*Write Compex Systems Pte Ltd
135, Joo Seng Road #08-01, PM Industrial Building
Singapore 368363
(Call
Fax
Tel:
Fax:
BBS:
(65) 286-1805 (8 a.m.-5 p.m. local time)
(65) 283-8337
(65) 282-8854 (24-hour access)
Internet
access/ E-mail:
FTPsite: [email protected]
ftp.compex.com.sg
Website: http://www.cpx.com or
http://www.compex.com.sg

“Quick Install Guide”
Compex, Inc.
4051 E. La Palma, Unit A
Anaheim, CA 92807 USA
(714) 630-7302
2001 by Compex, Inc.
All rights reserved.
Compex 8 Port Dual Speed
Fast Ethernet Switch
PS2208A
Manual Number:
M-0251-V1.3C
M-0251-V1.3G
M-0251-V1.3R
M-0251-V1.3F
Version 1.3C /G /R/F
March 2001
N908
Table of contents
Other Compex Switch manuals

Compex
Compex SGX3226 User manual

Compex
Compex Runner User manual

Compex
Compex SGX3224 User manual

Compex
Compex SXP2224WM User manual

Compex
Compex SGX3226 User manual

Compex
Compex SXP2226WM User manual

Compex
Compex ReadyLink PS2208B User manual

Compex
Compex SGX3226 User manual

Compex
Compex readylink CGX3224 User manual

Compex
Compex SXP1224B User manual