
Introduction
This is the Receiver (Rx) unit of CAT6 to HDMI Solution that can receive the
digital signal through CAT-6 ca les. This is compati le with HDMI v1.3
specifications, a cutting-edge technology which defines the supports to
transfer Deep Color (12 its/color) video and new lossless compressed
(Dol y TrueHD, Dol y Digital Plus and DTS-HD Master Audio) Digital audio,
with a andwidth up to 225MHz. The installation of CAT6 to HDMI is easy
and quick, simply place receiver side next to your CAT6 transmitter unit,
then place the CAT6 to HDMI receiver side to your display and get all
necessary ca les connected and enjoy.
Features
●HDMI 1.3, HDCP 1.1 and DVI1.1 Compliant.
●Supports digital video formats in Deep Color Mode at up to 36 its
(12 its/color) and new lossless compressed (Dol y TrueHD, Dol y Digital
Plus and DTS-HD Master Audio) Digital audio.
●Supports CAT-6 ca les of varia le types.
●Supports equalize and recover incoming TMDS data efore re-transmitting
them with optimal quality regardless of the incoming signal quality.
●Supports high definition resolution, the ca le distance test with 1080p/8 its
resolution the Input/Output source can run up to 45/15 meters. If
1080p/12 its resolution the Input/Output source can run up to 15/15
meters.
●Supports CEC ypass.
●Supports xvYCC.
Operation
Controls and
Functions
Front Panel
1. Video input: Connect the video input to the video output of the
transmitter unit using CAT-6 ca le.
2. DDC input: Connect the DDC input to the DDC output of the transmitter
unit using CAT-6 ca le.