Converters.TV Cat5 Cable - 50m User manual

HDMI Video Receiver over
Cat5 Cable - 50m ID# 539
Operation Manual

Introduction
HDMI Video Receiver over Cat5 Cable - 50m is the receiver (Rx) unit of
HDMI over CAT5 Tx/Rx solution, works with ID #5 2: HDMI Video
Transmitter over Cat5 Cable - 50m to 250m (the transmitter), can extend
HDMI signal through CAT-5 cables for a distance up to 50 meters. The
installation of HDMI Over CAT5 is easy and quick, simply place ID #5 2:
HDMI Video Transmitter over Cat5 Cable - 50m to 250m next to your
HDTV source such as a DVD player, then place HDMI Video Receiver over
Cat5 Cable - 50m next to your display, and get all necessary cables
connected to complete and enjoy.
Feature
1. Compliant with HDMI 1.2, HDCP 1.1 and DVI 1.0 specifications.
2. Supports CAT-5/CAT-5E/CAT-6 cables of variable types.
3. Supports high definition input up to 1080P, output resolution follows
input.
4. Easy to install and simple to operate.
Operating Function
and Control
Front Panel
1. HDMI OUTPUT:
Connect the HDMI output port to the HDMI input of your display.
Rear Panel

1. DDC INPUT:
Connect the DDC input to the DDC output of the transmitter unit
using CAT-5/CAT-5E/CAT-6 cable.
Note: For advanced user only, if it's known that the DDC or HDCP
data are not required for the source and the display, you can use
a single CAT-5 cable for the VIDEO connection only.
2. VIDEO INPUT:
Connect the VIDEO input to the VIDEO output of the transmitter
unit using CAT-5/CAT-5E/CAT-6 cable.
3. Power:
Plug the 5VDC power supply into the unit and connect the
adapter to AC wall outlet.
Specification
1. Supported resolutio s: HDMI - 80i/ 80p, 576i/576p, 720P@50/60Hz,
1080i@50/60Hz, 1080p@50/60Hz
2. I put: 1 CAT-5 input for VIDEO, 1 CAT-5 input for
DDC
3. Output: 1 HDMI female port
4. Power: 5V DC power supply
5. Dime sio s: 123(W) x 125(D) x 30(H)mm
6. Weight: 700g

Connection and
In tallation
ID #542
ID # 539