COOPER LIGHTING
FAIL-SAFE®
CONFINEMENT
DIMENSIONS
• Lens choice of prismatic
acrylic, prismatic poly-
carbonate or prismatic
tempered glass on fixture
side, clear polycarbonate
or clear tempered glass on
environmental side
• Stainless steel tamper-
resistant TORX®screws
with center pin reject are
standard. Allen-head
screws with center pin
reject are optional
• Die-formed 12 ga.-18 ga.
CRS body with continuous
welded and ground ends.
Standard white high
reflectance polyester
powder coat finish
• Lamps by others
• Lens secured by thru-studs
and vertically adjustable
internal CRS hold-downs
• Continuous, concealed
piano hinge
• One-piece, CRS door frame
with die-formed edges and
tightly closed corners
(gauge to match housing)
• Standard, Class P, CBM/ETL
ballast
• U.L. listed, C.S.A. certified,
standard wet label
DESCRIPTION
The Fail-Safe Low Profile FMSLP Series
combines maximum security construction
features with energy saving technology. This low
profile surface mounted luminaire utilizes a one
piece housing, security lensing and tamper
resistant fasteners to maximize impact resistance
and prevent unauthorized fixture penetration. An
emergency battery pack is available as an option.
U.L. listed and C.S.A. certified for wet locations.
ORDERING INFORMATION
SAMPLE NUMBER: FMSLP-X12-232-277-80/86-EB81-SSN
Ballast
Blank=Magnetic
Ballast
(Standard)3, 7
LEOC8=T8 Energy
Saving
Ballast 7
LE3=Energy Saving
Ballast 8
Electronic Ballast1
EB81=(1) Ballast for
use with T8
lamp
EB82=(2) Ballasts for
use with T8
lamps
EBX1=(1) Ballast for
use with
Biaxial Lamp
EBX2=(2) Ballasts
for use with
Biaxial Lamps
EB51=(1) Ballast for
use with T5
lamp
EB52=(2) Ballasts for
use with T5
lamps
EBT1=(1) Ballast for
use with
Compact
Fluorescent
Lamp
EBT2=(2) Ballasts for
use with
Compact
Fluorescent
Lamps
Lamp Type
1' Nom. Length
Compact Fluorescent 2
113=(1) 13W Quad
213=(2) 13W Quad
126=(1) 26W Quad
226=(2) 26W Quad
2' Nom. Length
T5 Fluorescents
114=(1) 14W Lamp
214=(2) 14W Lamps
414
=(4) 14W Lamps
124=(1) 24W HO Lamp
224=(2) 24W HO Lamps
324=(3) 24W HO
Lamps2
424
=(4) 24W HO Lamps
T8 Fluorescents
117=(1) 17W Lamp
217=(2) 17W Lamps
417=(4) 17W Lamps
Biaxial Fluorescents
140BX=(1) 40W Lamp
240BX=(2) 40W Lamps
340BX= (3) 40W Lamps
T8 U Lamps
1U6T8=32W Lamp
1 U 1 5/8=31W Lamp
2U6T8=32W Lamp
2U 1 5/8=31W Lamp
3U 1 5/8=31W Lamp
4' Nom. Length
T5 Fluorescents
128=(1) 28W Lamp
228=(2) 28W Lamps
428=(4) 28W Lamps
154=(1) 54W HO Lamp
254=(2) 54W HO Lamps
454=(4) 54W HO Lamps
T8 Fluorescents
132=(1) 32W Lamp
232=(2) 32W Lamps
432=(4) 32W Lamps
Lens Type
Inner Layer
(optional)
90=.005 UV
Absorbing
Overlay
Fixture Side
80=.125 Prismatic
Acrylic
81=.156 Prismatic
Polycarbonate
82=.187 Prismatic
Polycarbonate
93=.156 Prismatic
Tempered Glass
Environmental Side
84=.125 Clear
Polycarbonate
85=.187 Clear
Polycarbonate
86=.250 Clear
Polycarbonate
87=.375 Clear
Polycarbonate
88=.500 Clear
Polycarbonate 7
94=.187 Clear
Tempered Glass
96=.250 Clear
Tempered Glass
97=.375 Clear
Tempered Glass
98=.500 Clear
Tempered Glass 7
Voltage
120=120V
277=277V
347=347V
UNV=120V
through
277V
/
Housing
S=12 ga.
(Ultimax)
X=14 ga.
(Maximum)
D=16 ga. (Medium)
N=18 ga.
(Minimum)
Leave Blank for CR
Options
EBP=Emergency Battery Pack
FNL=Fluorescent Night Light 7
GLR=Fuse and Holder
RIF=Radio Interference Filter
(for FMSLP24 only)
Auto Control Modules
ACM/FNL=for FNL 7
On/Off Switches
SPS=Security Push Button 7
TCS=Touch Control System 2, 4, 7
Stainless Steel Door
SSN=Natural Brushed Finish 7
SSP=Polyester Powder Coat
Finish 7
Fasteners
SF1=TORX®-Head
(center pin reject) 8
SF3=Allen-Head
(center pin reject) 7
Accessories (Order Separately)
9306=Allen-Head Wrench 7
MF12-2FT=Plaster Frame and
Yoke Assembly 5
MF12-4FT=Plaster Frame and
Yoke Assembly 5
MF24-2FT=Plaster Frame and
Yoke Assembly 6
MF24-4FT=Plaster Frame and
Yoke Assembly 6
VRSD=TORX®-Head Vandal
Resistant Screwdriver
Product Family
FMSLP
FMS12CR
FMS24CR
Fixture Width
12=12”
24=24”
Leave Blank for CR
Notes: For additional options, consult your Cooper Lighting Representative. Specifications and Dimensions subject to change without
notice. Electronic ballast may cause interference with other electronic devices. If interference occurs, move the device away from the
product or plug/connect into a different circuit/outlet.
1For specific electronic ballast, specify brand and catalog number. 2Requires Deep Housing=5". 3For use with Compact Fluorescent,
Biaxial, and 20W T12 lamps. 4For additional information about the TCS option see pages 1106 and 1107. 512” width only. 624” width only.
7Available on FMSLP fixtures only. 8Available on FMS12CR and FMS24CR fixtures only.
FMSLP
FMS12CR
FMS24CR
13W-216W
Fluorescent
LOW PROFILE
MAXIMUM SECURITY
RECESSED LUMINAIRE
T5 LAMP TECHNOLOGY
T8 LAMP TECHNOLOGY
8"
[203mm]
12"
[305mm]
(4) 9/16" x 1"
[14 x 25mm] Mtg. Holes
2 1/4" [57mm]
Dia. Access Hole
13 3/16"
[335mm]
8"
[203mm]
8"
[203mm] 12"
[305mm]
(6) 9/16" x 1"
[14 x 25mm] Mtg. Holes
2 1/4" [57mm]
Dia. Access Hole
25 3/16"
[640mm]
8 3/4"
[222mm]
8 3/4"
[222mm]
MOUNTING DIMENSIONS
(8) 9/16" x 1" [14 x 25mm]
Mtg. Holes 2 1/4" [57mm]
Dia. Access Hole
20"
[508mm]
24"
[610mm]
49 3/16"
[1249mm]
13 3/8"
[340mm]
13 3/8"
[340mm]
13 3/8"
[340mm]
20"
[508mm]
(6) 9/16" x 1" [14 x 25mm]
Mtg. Holes 2 1/4" [57mm]
Dia. Access Hole
25 3/16"
[640mm]
8 3/4"
[222mm]
24"
[610mm]
(8) 9/16" x 1"
[14 x 25mm] Mtg. Holes 2 1/4" [57mm] Dia.
Access Hole
8"
[203mm]
3" [76mm]
3"
[76mm]
12" [305mm]
24" [610mm]
12"
[305mm]
49 3/16"
[1249mm]
13 3/8"
[340mm] 13 3/8"
[340mm]
13 3/8"
[340mm]
FMS12
FMS24
1460
