Cooper Lighting FAIL-SAFE TC User manual

Catalog #
Project
Comments
Prepared by
Type
Date
SPECIFICATION FEATURES
04/30/2007 8:47:23 AM
Consult your representative for additional options and finishes.
Specifications and Dimensions subject to change without notice.
ADC041425
SIDE DIMENSIONS
DESCRIPTION
The Fail-Safe VR 2000 11" Round Series combines strength-gaining
architecture with energy-saving technology. Architecturally angled facets
blend with its circular form to actually increase the ability of the lens to
deflect blows and absorb impact. Extra thick injection molded polycarbonate
lens incorporates an optical design that obscures the lamp image and
spreads light evenly. An emergency battery pack is also available on
fluorescent fixtures. U.L. listed and C.S.A. certified for wet locations. The
durable, versatile 11" Round TC/TW is perfect for use in corridors,
dormitories, public rest rooms, rapid transit stations, loading docks and
minimum security institutions.
A ... Lens
One-piece injection molded UV
stabilized polycarbonate min.
0.130" thick. All light control prisms
& blondels are on the inside
surface of the lens, reducing dirt
build-up and making cleaning
easier.
B ... Fasteners
Four stainless steel TORX® screws
with center reject pin. Screw-heads
are recessed into lens to maximize
tamper-resistance. Fasteners are
captive in the lens and sealed by
means of a neoprene O-ring.
C ... Reflector
16 ga. CRS with white high
reflectance polyester powder coat
finish.
D ... SCT Housing
(Optional Accessory) Cast
aluminum. Four 1/4" dia. fasteners
are required for maximum vandal
resistance. Three 1/2" NPT entries
for surface conduit. Standard black
polyester powder coat finish.
Housing is designed for surface
mount. Any other application will
void Cooper's warranty.
E ... Socket
Polycarbonate: Dedicated to
correct lamp wattage.
Incandescent is porcelain medium
base with nickel-plated brass screw
shell.
F ... Gasket
One-piece die cut closed-cell EPDM
mounting gaskets seal entire lens
and housing.
G ... Ballast
Copper-wound NPF, HPF or
electronic ballast are available with
certain wattages. Consult ordering
information.
7W - 32W
Fluorescent
75W
Incandescent
POLYCARBONATE
11" ROUND SURFACE LUMINAIRE
Clear Prismatic or White
Vandal Resistant
Luminaire
A
C
B
F
H
G
E
11" dia.
[279mm]
D
11"
[279 mm]
4"
[102 mm]
11"
[279 mm]
4"
[102 mm]
3 1/2"
[89 mm]
Deep
Flat
ENERGY DATA
For Energy Management related
technical data to support the
performance of this fixture series,
refer to the ordering information for
input wattage.
FAIL-SAFE®

Fail-Safe • Customer First Center • 1121 Highway 74 South • Peachtree City, GA 30269 • TEL [phone] • FAX [phone]/2007 8:47:23 AM
Specifications and Dimensions subject to change without notice.
ADC041425
PHOTOMETRICS
ORDERING INFORMATION
ORDERING MATRIX
11" ROUND
TC/TW
0o30o
60o
90o
Zone Lumens %Lamp %Fixture
0- 30 136 7.6 15.9
0- 40 245 13.6 28.6
0- 60 535 29.7 62.7
0- 90 839 46.6 98.2
0-180 854 47.5 100.0
0
1
2
3
4
5
6
7
8
9
10
CTTC-PP-26A-120
(1) PL-T/26W/30/4P Lamp
1800 Lumens
Efficiency: 47.5%
Spacing Criterion: 1.7
Ballast Factor: 1.0
Report # 767200
Zonal Lumen Summary
56 56 56 56 55 55 55 55 52 52 52 50 50 50 48 48 48 47
50 48 45 43 49 46 44 42 42 42 41 42 41 39 40 39 38 37
45 41 37 34 44 40 36 33 38 35 32 36 33 31 34 32 30 29
41 35 30 27 39 34 30 26 32 29 26 31 28 25 29 27 25 24
37 30 26 22 36 30 25 22 28 25 22 27 24 21 26 23 21 20
33 27 22 18 32 26 22 18 25 21 18 24 20 18 23 20 17 16
30 23 19 15 29 23 18 15 22 18 15 21 17 15 20 17 14 13
28 21 16 13 27 20 16 13 19 15 12 18 15 12 18 15 12 11
26 18 14 11 25 18 14 11 17 13 11 17 13 11 16 13 10 9
24 17 12 9 23 16 12 9 16 12 9 15 12 9 14 11 9 8
22 15 11 8 21 15 11 8 14 10 8 14 10 8 13 10 8 7
Angle 0.0
0 151
5 152
10 153
15 157
20 161
25 165
30 169
35 173
40 175
45 177
50 176
55 171
60 163
65 148
70 127
75 101
80 71
85 46
90 27
Candlepower
Coefficients of Utilization
Effective floor cavity reflectance 20%
rc 80% 70% 50% 30% 10% 0%
rw 70 50 30 10 70 50 30 10 50 30 10 50 30 10 50 30 10 0
RCR
Notes:
For additional options, consult your Cooper Lighting Representative. Specifications and dimensions subject to change without notice.
Products also available in non-US voltages and 50Hz for international markets.
1. Supplied from factory with deep casting. 2. Only available in HPF. 3. RP option not required when casting in supplied.
*-Does not apply when using electronic ballast.