Costway BC10046US User manual

Please give us a chance to make it right and do better !
Contact our friendly customer service department for help first.
Replacements for missing or damaged parts will be shipped ASAP !
Contact Us !
Do NOT return this item.
Baby Stroller
BC10046US
USER’S MANUAL
THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE.
US:[e-mail]
UK:[e-mail]
AU:[email protected]
US office: Fontana UK office: Ipswich AU office: Truganina

02 03
Before You Start
General Warnings:
Danger! Keep all small parts and packaging materials for this product away from
babies and children, otherwise they may pose a choking hazard.
The product must be installed and used under the supervision of an adult.
Read through each step carefully and follow the proper order.
Remove all Packaging, separate and count all parts and hardware before
installation.
Please ensure that all parts are correctly installed, incorrect installation can lead to
a danger.
We recommend that, where possible, all items are assembled near the area in
which they will be placed in use, to avoid moving the product unnecessarily once
assembled.
Ensure a secure surface during installation, and place the product always on a flat,
steady and stable surface.
Please read all instructions carefully and keep it for future reference.
33
Read these instructions carefully before use and keep them for future
reference. Your child's safety may be affected if you do not follow these
instructions. When you unpack the stroller from the carton box, please remove
all plastic bags and small accessories and keep them away from children.

04 05
Unfold The Stroller
Assembly
of Front Wheel
Open the folding hook,
unfold as the picture showed until frame is opened completely.
Insert the metal part
into the front wheel.
When you hear “click”
sound, the front wheels
are assembled. press the
side metal button to
release front wheel.
Release of front wheel.
slide the button
to lock and unlock
front wheel.
Caution:Ensure that all locks are in lock up
position before pulling up and pushing the baby stroller.
Components
Parts
Please read the instruction book carefully before using,it will tell you the
correct operation method and installation procedures. Avoid any
possibility of stroller damage or baby hurt because of incorrect operation.
Please keep this instruction book well, and put it in the place easy to get.
1. Handle
2. Canopy
3. Armrest
4. Carrycot
5. Footrest
6. Front wheel
7. Rear wheel
8. Folding button

1
2
ASSEMBLE AND
DISASSEMBLE
THE CARRYCOT
As shown in the Figure 1:
The carrycot can be assembled by
inserting the plastic adapter on the
frame of the stroller into the
adapter of the carrycot on both
sides.
As shown in the Figure 2:
Press the disassembly button of the
carrycot on both sides inwards, and
lift it up to disasssemble the carrycot.
Assembly and release
of rear wheel
Safety Belt
Insert the bolt
and tighten
Insert the axle of
brakes and tires
Follow the left picture: Press down the button to open the safety buckle.
Follow the right picture: Insert the buckle to the socket, when hear click
sound. then it is locked.
Cover cover sheet, and insert
whole stroller frame into the
rear wheel frame. When hearing
the “click” sound, the rear
wheels are assembled.Press
down rear wheel release button
to remove back wheel.
Caution:Please always use the safety harness for safety.
Put the crotch strap between baby' s legs and clasp the buckle.
06 07

08 09
CARRYCOT
ADJUSTMENT
CANOPY
ASSEMBLY
Linked Brake
of the Rear Wheels
Pull up the adjustment
button to adjust the angle
of the carrycot.
Press linked brake button with foot to
stop stroller as picture showed. Press
back to unlock brake.
Linked brake
Just adjust the canopy
adapting clip to the
carrycot tube.
Caution: Adjust the carrycot carefully while the baby is
in it in order to prevent the danger that may be caused
by a sudden position change of the seat.
Caution: Please press the brake lever when stopping the
stroller to avoid moving of the stroller. Push the stroller to
check whether the locks are in lock up position.
REMOVABLE ARMREST
FOLDING OF THE STROLLER
Removable
Front Armrest
1. Remove the carrycot.
2. Press the folding button and push down the handle at the same time.
3. Push down the handle until the lock lever can lock the stroller.
Caution: Please pull the front armarest to make sure
that the installation is firm.

When damage or dysfunction occurs, stop using the stroller.
our customer service.
contact
10