Courtyard Creations KTS889J-WM User manual

ASSEMBLY INSTRUCTIONS
KTS889J-WM
ATTENTION: THIS PRODUCT IS NOT FOR COMMERCIAL USE
INTENDED FOR RESIDENTIAL USE ONLY.
PART
NO. MATERIAL CODE PART Q’TY PART NO. MATERIAL CODE PART Q’TY
1
2
3
4
5
1
1
1
1
6
2
27
8
9
10
11
12
13
14
2
6
10
8
2
1
1
1
PARTS LIST
Do not discard any of the packaging until you have checked that you have all the parts and pack of fittings.
Retain the assembly instructions for future reference.
Please quote following FQC NO. when contacting service center.
Keep children away during assembly. This item contains small parts which can be swallowed by children.
Children should always be under direct adult supervision while using the product.
!
!
!
!
SERVICE CENTER TOLL FREE NO.
TEL: [phone]
FAX: [phone]
STOP DON’T RETURN TO STORE!
PAGE 1 OF 3 COURTYARD CREATIONS INC.
RIGHT LEG
LEFT LEG
SEAT
ASSEMBLY
BACK
ASSEMBLY
BOLT M6*16
BOLT M6*14
BOLT M6*50
WASHER d6.5*D13*1.0
PLASTIC NUT M6*P1.0
BOLT CAP
BOLT CAP M6
HEX.KEY WRENCH 4MM
HEX.KEY WRENCH 6MM
NUT WRENCH 10&13MM
KTS889J-CS01
KTS889J-CS02
KTS889J-CS03
KTS889J-CS04
Attention:
Make sure that each bolt needed for all steps match
the corresponding figure to ensure proper assembly.
Step 1:
Place the right leg (#1) onto a non-abrasive surface,
such as a carpet, with the bracket facing upwards. At the
rear of the chair, fasten the seat assembly (#3) to the
right leg (#1) by using bolts (#5) and washers (#8). Keep
the bolts loose. See Figure 1.
FIGURE 1
#5 BOLT M6*16
16
Note:
The labels marked “L” and “R” on the legs (#1 and #2)
should coincide with Figure 1 - Figure 3 to ensure proper
assembly.
R1
35
58
8
10
10
17C33A0717001Y4
17C33A0706001Y4
17C02A0755131Y4
17FA05040301-Y4
1800C23001
1800337004
1800337006
17KAA0101----Y4
17KAA0201----Y4
17KAB1101----Y4

STOP DON’T RETURN TO STORE!
PAGE 2 OF 3
Step 2:
At the front of the chair, fasten the seat assembly (#3) to
the right leg (#1) by using bolts (#5 and #6) and washers
(#8). Keep the bolts loose. See Figure 2.
Step 4:
At the front of the chair, fasten the left leg (#2) to the
seat assembly (#3) by using bolts (#5 and #6) and
washers (#8). Keep the bolts loose. See Figure 4.
Step 3:
At the rear of the chair, fasten the left leg (#2) to the
seat assembly (#3) by using bolts (#5) and washers
(#8). Keep the bolts loose. See Figure 3.
FIGURE 2 FIGURE 3
FIGURE 4 FIGURE 5
#5 BOLT M6*16
16
14
#6 BOLT M6*14
#5 BOLT M6*16
16
14
#6 BOLT M6*14
#5 BOLT M6*16
16
R
Step 5 :
Fasten the back assembly (#4) to the seat assembly (#3)
by using bolts (#7), washers (#8) and plastic nuts (#9).
See Figure 5.
5
8
10
611
3
1R1
L
3
2
55
10 10
88
5
611
10
8
#7 BOLT M6*50
50
2
1
3
8
9
710
8
3
4
Make sure that all of the bolts have been tightened
completely and cover them with bolt caps (#10 and #11).

STOP DON’T RETURN TO STORE!
PAGE 3 OF 3
The store where you made your purchase
does not stock parts for this item
if you need parts,
whether they are missing or damaged.
STOP!
MissingAPart?
No Need To Go Back To
The Store
Call us between 9:00 AM and 4:30 PM
Eastern Time Monday through Friday
Call Toll Free
TEL: [phone]
FAX: [phone]
PLEASE READ THESE INSTRUCTIONS COMPLETELY BEFORE STARTING ASSEMBLY
PLEASE SEPARATE AND IDENTIFY ALL PARTS, MAKING SURE THAT YOU
HAVE ALL OF THEPARTSLISTED.
SHOULD YOU NOTLOCATE ALL OF THE ABOVE PARTS, PLEASE INSPECTALL
PACKING MATERIAL FOR ANY SMALL PARTSTHAT MAYHAVEBECOME
SEPARATED IN SHIPMENT.
SHOULD YOU EXPERIENCEANYDIFFICULTY DURING ASSEMBLYOR IF ANY
PARTIS MISSING OR DAMAGED,PLEASE CALL THE HELP LINE 1-877-539-7436
BEFORERETURNING THEITEM TO THESTORE.
PLEASE PROVIDE THEFOLLOWING INFORMATION:
1-MODEL NUMBER OF THEPRODUCT.
2-PARTNUMBER AND MATERIAL CODE OF THE PARTFROM THE PARTS LIST
SHOWN ON ASSEMBLY INSTRUCTIONS.
MOST PROBLEMSCAN BERESOLVED WITHOUT RETURNING THIS PRODUCT
TO THERETAILER.
FIGURE 6
Step 6 :
Rotate the back assembly (#4) as show in Figure 6.
Cleaning and Maintenance
•Wash frame and fabric parts with mild soap and water,
rinse thoroughly, and dry frame completely. Do not use
bleach, acid, or other solvents on the frame parts.
•We recommend the use of furniture covers when not in
use.
•Please inspect and tighten all bolts or fasteners on a
regular basis to ensure proper performance and safety
of your chair.
•In order to prolong the life and beauty of your chair, we
recommend that it be stored in a dry and protected area
during off season periods.
4