Courtyard Creations KLS7780-WM User manual

ASSEMBLY INSTRUCTIONS
You will need the following tools:
- Phillips Screwdriver (Not Included)
4
3
22
1
KLS7780-WM
FIGURE 1
KLS7780-CS01
62KLS7780Q101
17C17A1307001Y4
17C17A0403001Y4
SCREW ST4.2*18
SCREW ST4.2*12
ATTENTION: THIS PRODUCT IS NOT FOR COMMERCIAL USE
INTENDED FOR RESIDENTIAL USE ONLY.
PARTS LIST
PART
NO. MATERIAL CODE PART Q’TY PART NO. MATERIAL CODE PART Q’TY
1 1
242
3 2
SERVICE CENTER TOLL FREE NO.
TEL: [phone]
FAX: [phone]
COURTYARD CREATIONS INC.
PAGE 1 OF 2
STOP DON’T RETURN TO STORE!
CHAIR ASSEMBLY
LEG SUPPORT
Step 1:
Place the chair assembly (#1) onto a non-abrasive
surface, such as a carpet. Fasten the leg supports
(#2) to the seat of the chair assembly (#1) by
using screws (#3). See Figure 1.
Do not discard of any of the packaging until you have checked that you have all of the parts and
fittings required.
Keep children away during assembly. This item contains small parts that can be swallowed by
children. Children should always be under direct adult supervision while using this product.
Retain these assembly instructions for future reference.
Quote the following FQC NO. when contacting the service center.
!
!
!
!

PAGE 2 OF 2
STOP DON’T RETURN TO STORE!
FIGURE 2 FIGURE 3
Cleaning and Maintenance
•Wash frame parts with mild soap and water, rinse thoroughly, and dry completely. Do not use bleach,
acid, or other solvents on the frame parts.
•We recommend the use of furniture covers when not in use.
•Inspect and tighten all bolts or fasteners on a regular basis to ensure proper performance and safety
of your chair.
•In order to prolong the life and beauty of your chair, we recommend that it be stored in a dry and
protected area during off season periods.
The store where you made your purchase
does not stock parts for this item.
If you need parts,
whether they are missing or damaged,
STOP!
MissingAPart?
No Need To Go Back To
The Store
Call us between 9:00 AM and 4:30 PM
Eastern Time Monday through Friday
Call Toll Free:
TEL: [phone]
FAX: [phone]
READ THESE INSTRUCTIONS COMPLETELY BEFORE STARTING ASSEMBLY
SEPARATE AND IDENTIFY ALL PARTS, MAKING SURE THAT YOU
HAVE ALL OF THEPARTSLISTED.
IF YOU DO NOTLOCATE ALL OF THE PARTS LISTED, INSPECT THE
PACKING MATERIAL FOR SMALL PARTSTHAT MAYHAVEBECOME
SEPARATED DURING SHIPMENT.
IF YOU EXPERIENCEANYDIFFICULTY DURING ASSEMBLYOR IF ANY
PARTS ARE MISSING OR DAMAGED,CALL THE HELP LINE AT 1-877-539-7436
BEFORERETURNING THIS ITEM TO THE STORE.
PROVIDE THEFOLLOWING INFORMATION WHEN CALLING:
1-MODEL NUMBER OF THEPRODUCT.
2-PARTNUMBER AND MATERIAL CODE OF THE PARTFROM THE PARTS LIST
MOST PROBLEMS CAN BERESOLVED WITHOUT RETURNING THIS PRODUCT
TO THERETAILER.
Step 3:
Turn the chair to its upright position. See Figure 3.
Step 2:
Fasten the leg supports (#2) to the legs of the
chair assembly (#1) by using screws (#4).
See Figure 2.
4
1
2 2