Courtyard Creations KTS8896-WM User manual

ASSEMBLY INSTRUCTIONS
ATTENTION: THIS PRODUCT IS NOT FOR COMMERCIAL USE
INTENDED FOR RESIDENTIAL USE ONLY.
PARTS LIST
KTS8896-WM
PART
NO. MATERIAL CODE PART Q’TY PART NO. MATERIAL CODE PART Q’TY
1
2
3
4
5
6
7
1
1
1
1
8
9
8
10
10
2
8
2
1
Do not discard any of the packaging until you have checked that you have all the parts and pack of fittings.
Keep children away during assembly. This item contains small parts which can be swallowed by children.
Children should always be under direct adult supervision while using the product.
Retain the assembly instructions for future reference.
Please quote following FQC NO. when contacting service center.
PAGE 1 OF 2 COURTYARD CREATIONS INC.
!
!
!
!
STOP DON’T RETURN TO STORE!
FIGURE 1
ATTENTION:
Make sure that each bolt needed for all steps match the
corresponding figure to ensure proper assembly.
KTS8895-CS01
KTS8895-CS02
KTS8896-CS01
62KTS889FH101
17C33A0706001Y4
17C01A0712001Y4
17FA05040301-Y4
18000337004
18000337001
17KAA0101----Y4
LEFTARM
RIGHTARM
SEAT ASSEMBLY
SUPPORT
BOLT M6*16
BOLT M6*35
WASHER d6.5*D13*1.0
BOLT CAP
BOLT CAP M6
HEX. KEY WRENCH 4MM
STEP 1:
Place the right arm (#2) onto a non-abrasive surface,
such as a carpet. At the front of the bench, fasten the
seat assembly (#3) to the arms (#1 and #2) by using
bolts (#5) and washers (#7). Keep the bolts loose.
See Figure 1. 5
5
7
7
8
8
NOTE:
The labels marked “L” and “R” on the arms (#1 and #2)
should coincide with Figure 1 to ensure proper
assembly.
R
L
16 #5 BOLT M6*16
1
2
3
TEL: [phone]
FAX: [phone]
SERVICE CENTER TOLL FREE NO.

PAGE 2 OF 2
STOP DON’T RETURN TO STORE!
FIGURE 2
FULLASSEMBLY
FIGURE 3
16
#5 BOLT M6*16
STEP 2:
At the rear of the bench, fasten the support (#4) to the
arms (#1 and #2) by using bolts (#5) and washers (#7).
Keep the bolts loose. See Figure 2.
STEP 3:
Turn the bench to its upright position. At the back of the
bench, fasten the seat assembly (#3) to the arms (#1 and
#2) by using bolts (#6) and washers (#7). Make sure that
all of the bolts have been tightened completely and then
cover them with bolt caps (#8 and #9). See Figure 3.
STEP 4:
See Full Assembly.
Cleaning and Maintenance
• Wash frame and fabric parts with mild soap and water,
rinse thoroughly, and dry frame completely. Do not use
bleach, acid, or other solvents on the frame and fabric
parts.
• We recommend the use of furniture covers when not in
use.
• Please inspect and tighten all bolts or fasteners on a
regular basis to ensure proper performance and safety of
you bench.
• In order to prolong the life and beauty of your bench, we
recommend that it be stored in a dry and protected area
during off season periods.
Missing A Part?
No Need To Go Back To
TheStore!
The store where you made your purchase
does not stock parts for this item
if you need parts,
whether they are missing or damaged.
Call Toll Free
TEL: [phone]
FAX: [phone]
Call us between 9:00 AM and 4:30 PM
Eastern Time Monday through Friday
PLEASE READ THESE INSTRUCTIONS COMPLETELY BEFORE STARTING ASSEMBLY
PLEASE SEPARATE AND IDENTIFY ALL PARTS, MAKING SURE THAT YOU
HAVE ALL OF THEPARTSLISTED.
SHOULD YOU NOTLOCATE ALL OF THE ABOVE PARTS, PLEASE INSPECTALL
PACKING MATERIAL FOR ANYSMALL PARTSTHAT MAYHAVEBECOME
SEPARATED IN SHIPMENT.
SHOULDYOU EXPERIENCEANYDIFFICULTY DURING ASSEMBLYOR IF ANY
PARTIS MISSING OR DAMAGED,PLEASE CALL THE HELP LINE 1-877-539-7436
BEFORERETURNING THEITEM TO THESTORE.
PLEASE PROVIDE THEFOLLOWING INFORMATION:
1- MODEL NUMBER OF THEPRODUCT.
2- PARTNUMBER AND MATERIAL CODE OF THE PARTFROM THE PARTS LIST
SHOWN ON ASSEMBLY INSTRUCTIONS.
MOST PROBLEMSCAN BERESOLVED WITHOUT RETURNING THIS PRODUCT
TO THERETAILER.
The store where you made your purchase
does not stock parts for this item
if you need parts,
whether they are missing or damaged.
STOP!
MissingA Part?
No Need To Go Back To
The Store
Call us between 9:00 AM and 4:30 PM
Eastern Time Monday through Friday
Call Toll Free
TEL: [phone]
FAX: [phone]
#6 BOLT M6*35
35
55
77
88
9
6
7
1
2
4
3
12