CP TECHNOLOGIES POI-4000 User manual

POI-4000
56W Power over Ethernet Injector
Ethernet Switch
100 m
POI-4000
100 m
POR-0100
100 m
DC
Power
PD Device

Quick Guide
Step 1: Connection to Ethernet Switch
A. Connect one of the Ethernet Switch port to the LAN IN port of P0I-4000 as the following
connection.
B. The LED indicators “POWER” and “IN” will be on indicating Power and Ethernet connection.
C. The LED indicators “IN” will flash to indicate Ethernet data activity.
Step 2: Connection to PoE Repeater
D. Connect the LAN OUT port of P0I-4000 to power up the PD device as the following connection.
E. The LED indicators “OUT” will turn on indicating the Power and Ethernet connection.
F. The LED indicators “OUT” will flash to indicate Ethernet data activity.
** Note: If the Ethernet cable is not standard CAT5 cable, the P0R-0100 may be working for shorter
length than 100 meter.
V1.0
Ethernet Switch
Ethernet Switch
POR-0100 PD Device
100 m
100 m
POI-4000
100 m
POI-4000
100 m