Crest Audio MFP44F User manual

5 YEAR WARRANTY
Olbertz Holdings Pty Ltd ACN 010 003 933 trading as The Crest Company of 165 South Pine Road, Brendale, Queensland, 4500, Ph: 1800 812 261,
www.crest.com.au, warrants that if this Crest product purchased by you from The Crest Company or a retail outlet is found by The Crest Company to be defective
in workmanship or materials within 5 years of the date of purchase, The Crest Company will (at its election) either repair that product, replace the product, supply
an equivalent product or pay the costs of repairing or replacing the product or acquiring an equivalent product.
This limited warranty will not extend to or cover any expenses associated with removing, demounting the original product or installing the repaired, replaced or
equivalent product or all or any of its components, you must bear these expenses. It also does not cover damage or loss resulting from intentional or unintentional
misuse of, tampering with, alterations to or incorrect installation of this product or use of this product for purposes other than that for which it is designed or in a
manner inconsistent with the product’s instructions. This limited warranty also does not apply to damage or loss resulting from fair wear and tear or events beyond
The Crest Company control including but not limited to natural disasters.
In order to claim under this warranty, you must contact The Crest Company and return to The Crest Company (via our nominated reply paid address) the product
and its components and proof of purchase (including the date and location of purchase) so that The Crest Company can verify the defect and your purchase.
Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure
and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of
may have under a law in relation to the goods or services to which the warranty relates.
SAFETY FIRST
1. Installatio nof this TV Wall Mount will be easier with
two people.
2. Some images in this guide may vary slightly from
the actual components supplied.
3. Ensure this instruction manual is completely read
and understood before attempting installation.
4. This TV Wall Mount MUST NOT be installed solely
5. This TV Wall Mount MUST be installed in sound
supporting structures such as those made
of timber, steel or masonry using appropriate
fasteners.
6. The supporting structure must be capable of
sustaining the combined weight of the TV Wall
Mount and the display otherwise the structure
must be reinforced.
7. The fasteners supplied in this hardware pack
installing into a supporting structure made of steel,
appropriate fasteners must be used and sourced
from an appropriate supplier.
8. Use appropriate tools and safety equipment and
ensure adequate ventilation during installation.
9. If uncertain about any aspect of installation,
contact The Crest Company or an installation
professional.
10. Please retain these instructions for future reference.
v2
PO Box 5658 Brendale
QLD Australia 4500
Customer Support
1800 812 261
www.crest.com.au
AUSTRALIAN OWNED
Proudly brought to you by:
MFP44F
Hardware Kit Contents
Tools Required
DRYWALL INSTALLATION (TIMBER SUPPORTS):
· Adjustable spanner/socket set
· Long handle philips head sc rewdriver
· Power drill
· High speed 5mm drill bit
2M6 x 50mm Screw
8 x 40mm Anchor 2
6
MASONRY INSTALLATION:
· Adjustable spanner/socket set
· Long handle philips head sc rewdriver
· Power drill with hammer function
· 8mm Masonry drill bit
· Spirit level and pencil
· Hammer
MM
FIXED Ultra Slim
TV WALL MOUNT
17"-55" SMALL
VESA COMPATIBILITY TV WEIGHT
50kg MAX400 x 400 MAX
LOW
PROFILE
20
75x75, 100x100, 100x200, 200x100,
200x200, 200x300, 300x200, 300x300,
300x400, 400x300, 400x400
W-A
W-B
W-C
W-D
W-E 4
4
VESA Adaptor Arms
4
G M6x12 Screws
4
H M6 Nut
The maximum supported
weight is up to 50kg
400mm
360~390mm
340mm
290~320mm
100mm
75mm
130mm
200mm
400mm
360~390mm
290~320mm
340mm
75mm
100mm
130mm
200mm
270mm
270mm
20mm

Step 2: Attach Mounting Plate to TV (Max VESA 200x200)
1. Using a second person for assistance, lay your TV face down on something soft so as not to scratch the TV screen.
2.
3.
snugly (the bolt must turn at least 3 full turns, do not tighten). If you feel resistance stop immediately and select a smaller bolt.
4. Gently put your TV Wall Mount on the back of the TV so that the mounting holes are showing through the holes of the
mounting plate.
If the back of your TV is curved or recessed you will also need to use a spacer (F) depending upon the amount of space
you are trying to clear. If using a spacer you will also need to use longer screws. Remember that the bolt needs to turn at
least 3 full turns.
Step 1: Attach Wall Plate to Wall
A. INSTALLING IN DRYWALL (TIMBER SUPPORTS)
WARNING: The Crest Company holds no responsibility for incorrectly installed TV Wall Mounts.
1. After working out the required positon that you want your TV mounted, locate the closest stud to that position using a stud
2.
3. Pre-drill holes to a minimum depth of 55mm using a high speed 5.0mm drill bit. If installing in hardwood, larger diameter
and deeper holes may be required.
4. Attach the wall plate using screws (W-A) thr ough the washers (W-C). Do not over tighten.
B. INSTALLING IN MASONRY
WARNING: Ensure you have a minimum of 35mm of actual concrete/brick thickness in the hole for the anchors. Do not drill into mortar joints.
Installer must verify that the supporting surface will safely support the combined weight of the TV Wall Mount and TV.
The Crest Company holds no responsibility for incorrectly installed TV Wall Mounts.
1.
2. Pre-drill holes to a minimum depth of 60mm using 8mm masonry drill bit. Clean out holes.
3. Fully insert concrete anchors (W-B). Tap in with hammer if required.
4. Attach wall plate by inserting the screws (W-A) through the washers (W-C) into each concrete anchor (W-B).
Do not over tighten.
5. Using the correct mounting bolt size and length, insert these through the corresponding hole on the washer (D/E/W-C)
to attach mounting arms to the rear of the TV. To avoid damaging TV, do not over tighten bolts.
The Crest Company is not responsible for any damage caused by screwing the bolt too far into the back of the TV.
1 1a
1b
Step 3: Attaching VESA Adaptor Arms (400x400)
This step is required if the VESA mounting pattern for your TV is over 200x200mm and less then 400x400mm
1. Using the VESA Adaptor Arms (W-E ) attached them to theWall Plate (W-E) using the Screws (G) and Nuts (H) as shown in
image 3a. This will allow 300x300mm and 400x400mmm VESA Pattern.
2. The VESA Adaptor Arms can also go horizontal or vertical as show in image 3b to allow for other VESA mounting Patterns.
Step 4: Attach TV to Wall Plate
1. Using a second person for assistance, carefully lift the TV and hook arms over the top of the wall plate.
2. Slowly lower the bottom of the TV until the bottom of the mounting plate locks into the bottom of the wall plate.
3. Tighten screw at the top of the mounting plate to make sure the TV is secure. (depending upong the size of your TV a long
handle screw driver may be required)
Check your TV Wall Mount is secure and safe to use at regular intervals (at least every three months).
300x200mm 400x200mm
200x300mm
200x400mm
300x300mm
400x400mm
23a
3b 4
(ø17/64")
ø 8mm
ø 5.0mm
(ø 7/32")
H
G
W-B
W-B
W-C
W-C
W-A
A/B/C
D/E/W-C
F
TV
Wall
W-C W-A