CrimeStopper PARK-EMCU User manual

1230-62140-01B
parking assist system
Installation manual
CONGRATULATIONS on your choice of a CrimeStopper Universal parking assist system. This booklet contains all of
the necessary information for connecting and using your parking assist system. If any questions should arise,
contact your installation facility or check out the Knowledge Base at www.crimestopper.com
PARK-EMCU

2
Warranty
Rockford Corporation oers a limited warranty on all CrimeStopper products as detailed below and on the following terms:
ALL SAFETY PRODUCTS
Length Of Warranty - 3 Year
SECURITY AND REMOTE START PRODUCTS
Length Of Warranty
Limited Lifetime, CrimeStopper will repair or replace defective modules with a comparable new or refurbished module during reasonable
usage and the lifetime of the vehicle in which it is originally installed provided that the module is returned to Rockford, shipping pre-paid and
accompanied by a legible copy of the original sales receipt from the authorized dealer containing; the consumer’s name, authorized dealer’s
name, date of purchase, item or sku number, product description, and the year make and model of the vehicle in which it is installed. The
additional componentry of the system, including but not limited to remotes, antennas and harnesses, are covered by a one year warranty from
the date of original purchase. Products received for repair or replacement without proof of purchase from an authorized dealer will be denied.
WHAT IS COVERED
This warranty applies only to CrimeStopper products sold to consumers by authorized CrimeStopper dealers in the United States of America
Products purchased by consumers from an Authorized CrimeStopper Dealer in any other country are covered only by that country’s Distributor
and not by Rockford Corporation.
WHO IS COVERED
This warranty covers only the original purchaser of CrimeStopper product purchased from an authorized CrimeStopper dealer. In order to receive
service, the purchaser must provide Rockford Corporation with a copy of the original sales receipt stating the customer name, dealer name,
product purchased and date of purchase. Products found to be defective during the warranty period will be repaired or replaced with a product
deemed to be equivalent at Rockford’s sole discretion.
WHAT IS NOT COVERED
- Damage caused by accident, abuse, improper installation, operations, water, and theft
- Any cost or expense related to the removal or reinstallation of product
- Any product which has had the serial number defaced, altered, or removed
- Subsequent damage to other components
- Any product not purchased from an authorized CrimeStopper dealer
LIMIT ON IMPLIED WARRANTIES
Any implied warranties including warranties of tness for use and merchantability are limited in duration to the period of the express warranty
set forth above. Some states do not allow limitations on the length of an implied warranty, so this limitation may not apply. No person is
authorized to assume for Rockford Corporation any other liability in connection with the sale of the product.
HOW TO OBTAIN SERVICE
Please call 1-800-998-6880 for Rockford Customer Service. You must obtain an RA# (Return Authorization number) to return any product to
Rockford Corporation. You are responsible for shipment of product to Rockford. [e-mail]

2 3
The PARK-EMCU parking assist system allows you to add rear parking assist to vehicles with plastic
bumpers. It comes with an audible alert or can be upgraded with an optional LED display (PARK-
LED). The system has simple wiring and comes with everything you need to do the install.
TABLE OF CONTENTS
Warranty 2
Introduction 3
Wiring 4
Specications 5
Key Features 6
Self Test 7
Function/ Alerts 8-9
Sensor Installation 10-13
Speaker/ Display Mounting 14-15
Testing 16
Troubleshooting 17
French 18-31
Spanish 32-45
Notes 46-47
Introduction

4
Fuse Purple
Black
Reverse Trigger
Ground
Speaker
(Audible Alert)
Display
(Sold Separately)
A B C D
A
B
C
D
MCU
(Main Control Unit)
Wiring

4 5
OPERATING VOLTAGE 12-16V
OPERATING CURRENT DRAW LESS THAN 102mA @12V
DETECTION RANGE REAR: 0.3-2.5M/ 1-8.2FT
NUMBER OF SENSORS 4 REAR
SENSORS PAINTABLE YES, PAINT TRAY INCLUDED
AUDIBLE ALERT YES, INCLUDED. ADJUSTABLE VOLUME
VISUAL ALERT YES, SOLD SEPERATELY
SELF TEST FUNCTION YES
Specifications

6
Key Features
Key Features:
• Visual display – is system comes with an audible alert but there is an
optional visual alerts sold separately (PARK-LED).
• Self-testing – is system will run a quick diagnostics every time it is
powered on.
• All weather design – is system was designed to work in all weather
conditions
• Sensor mounting options – e sensors in this system are designed to
work in plastic bumpers
Self Test

6 7
Self Test
SELF-TEST
When the vehicle’s gearshift is placed in“R”, the system will perform a self-test. This will test all of the
connected sensors to make sure that they are working as intended. If there are no issues found during
this test, the system will give a single audible alert. If there is a damaged sensor, the system will give
and audible alert 3 times. If you are using an optional display, the display read out will show which
sensor is faulting.
NOTE:
- If the system gives 3 audible alerts (meaning 1 or more of the sensors have damage) the remaining
sensors will continue to work.
E1 = Sensor A E2 = Sensor B
E3 = Sensor C E4 = Sensor D
Display
(Sold Separately)

8
Rear System Function
Placing the vehicle in Reverse will activate the rear mounted system.

8 9
Audible Alerts
REAR
AUDIBLE ALERT
Continuous alert
Faster multiple
repeating alerts
Multiple,
repeating alerts
Faster,
repeating alert
Single,
repeating alert
0.3~0.6m/1.0~2.0ft
<0.3m/1.0ft
0.6~0.9m/2.0~3.0ft
0.9~1.5m/3.0~5.0ft
1.5~2.5m/5.0~8.4ft

10
Sensor Mounting Instructions
SENSOR INSTALLATION:
• e mounting height of the sensors should be .45m/1.5’ to .65m/2.1’.
• For optimum performance the sensors should be evenly spaced across the rear of the
vehicle with as little curve as possible.
• In some vehicles this may be an issue due to license plates or objects behind the
bumper, so we recommend the following:
4 SENSOR SYSTEM:
• Find the middle of the bumper
• Find the outer most at surface where you can mount 2 sensors
• Measure between the outer most point of the sensor to the middle of the bumper.
• Divide that by 2 and that will give you your best mounting spot for your inner sensor
• If you are not able to use that location, install the sensor as close as possible.
NOTE: Before drilling any holes, check behind the bumper to ensure you are only drilling
through the bumper

10 11
Sensor Mounting Locations
Mark locations before drilling
Use tape that will not
damage the vehicles
paint to mark your
sensor locations
Center point
of bumper
Outer Most
Flat Surface
to Mount
Sensor
Outer Most
Flat Surface
to Mount
Sensor
Optimum
location
for Inner
Sensors
Optimum
location
for Inner
Sensors
REAR SENSOR LOCATIONS
45cm/17.75”
to 65cm/25.5”

12
Drilling the Holes
Before drilling any holes, be sure
that the hole saw is the same size
as the sensors you are installing.

12 13
Painting Sensors
After painting the sensors,
let them completely dry
before installing the silicone ring.
e sensors come mounted in a paint tray with the rubber “O”
rings not installed. is will allow for easy color match paint-
ing. Once the paint has dried, be sure to install the rubber “O”
rings prior to installing the sensors into the vehicle.

14
Mounting the Speaker
MOUNTING THE AUDIBLE ALERT
REAR MOUNT
Recommended speaker placement

14 15
DISPLAY PLACEMENT (optional)
The PARK-LED can be added to provide visual feedback when the sensors are triggered. The display is
designed to be mounted on the vehicles dash.
Dashboard mount
Mounting the Display

16
Testing the System
Rear system check
- To test the system, use a piece of wood (approx. .3mX1m/ 1’X3.3’).
- With the board beyond the furthest trigger point, back up to the board.
- The system should trigger once in sensor range.

16 17
Troubleshooting
TROUBLESHOOTING:
Aer the installation, the audible alert doesn’t work.
A. Are all of the cables connected properly?
B. Is the vehicles Ignition ON?
C. Is the vehicle in Reverse?
ere is a damaged sensor detected.
A. Are all of the sensors plugged into the main control unit correctly and tightly?
B. Is there a sensor wire broken or damaged?
C. Is the sensor covered by snow or mud?
D. Is the sensor damaged?
Getting a false warning.
A. Are all of the sensors plugged into the main control unit correctly and tightly?
B. Do any of the sensors detect the ground?
Any other questions should be directed to CrimeStopper technical support at 1-800-998-6880.

18
Fuse Purple
Black
Reverse Trigger
Ground
Speaker
(Audible Alert)
Display
(Sold Separately)
A B C D
A
B
C
D
MCU
(Main Control Unit)
Câblage

18 19
TENSION DE FONCTIONNEMENT 12-16V
CONSOMMATION DE COURANT DE FONC-
TIONNEMENT
MOINS DE 102 mA à 12 V
PLAGE DE DÉTECTION ARRIÈRE 0,3-2,5 M/ 1-8,2 pi
NOMBRE DE DÉTECTEURS 4 ARRIÈRE
DÉTECTEURS À PEINDRE OUI, LE BAC À PEINTURE EST INCLUS
ALERTE SONORE OUI, INCLUSE VOLUME RÉGLABLE
ALERTE VISUELLE OUI, VENDUE SÉPARÉMENT
FONCTION D'ESSAI AUTOMATIQUE OUI
Spécifications

20
Fonctions clés
Fonctions clés:
• Achage visuel – Ce système est muni d'une alarme sonore mais il y a des
alarmes visuelles en option venues séparément (PARK-LED).
• Test automatique – Ce système procèdera à un diagnostic rapide à chaque
fois qu'il est mis sous tension.
• Conception tous temps – Ce système a été con#u pour fonctionner dans
toutes les conditions météorologiques
• Options de montage des détecteurs – Les détecteurs dans ce système sont
conçus pour fonctionner dans des pare-chocs en plastique
Autotest