CrimeStopper SV-5110 User manual

INSTALLATIONINSTRUCTION
SV-5110 License barcolorcamera
SV-5120 IR.IILicense barcolorcamerawithIR
SecurViewseriesLicenseplatebarwaterproof back-up camerasaredesigned tobe installedon any
vehicleusing theexisting licenseplatemounting holes. Itiseasy toinstallwithno drilling required,
requiringminimalinstallation time.
Thisuniquelydesignedproduct canbe ofuseforanypassengercar, SUVand Van, alsocanbe of use
forlargetrucks,schoolbus, busorRVand boatsaswell. Furthermore, it not onlycanbe installedon
the licenseplate, butalsootherlocationsof thevehicle, suchason the sidesof cargotrailers, above
the hatchorinsideand outside motorhome’s.
The SV-5110type isdesigned foranypassengercar, SUV, Van, pickup truck ortrailer.
The SV-5120IR.II isthesameasabovebutincludesnight visionfeature.
SPECIFICATION:
Image Device: OmniVision CameraChipTM
TVSystem:NTSCfullcolor
OperatingVoltage: 12 VDC
Image: Mirrorimage ornon mirrorimage (optional)
Video Output: 1.0Vp-p, 750Ohm
Resolution:380 TVLines
Illumination:2Lux/F1.2, 0LuxwithNight-vision
Current Consumption:Max. 60mA/ 200mAforNight-vision
Lens:f=2.8mm/f=2.0
ViewAngle:130 degrees
WaterResistance:IP68
TECHNICAL SUPPORT:[phone]
INSTALLATIONTIPS:
IMPORTANT!!

Readthisinstructionsheetcompletelyand yourmonitorsinstructionsbeforebeginningthe
installation.
Note:MostLicense plates do notrequiremodification. However, please lookovercamera
mountingandplacementoptionspriortomakingmodificationstovehicle.
Step1. Removelicenseplate,ifnecessarycut orfilea¼slot abovethelicenseplatemounting holes
asshownbelow.
Step2. Installthe Licenseplatebarcameraoverthe faceon the topedgeof thelicenseplate; make
surethe screwsaresecure. DO NOTOVERTIGHTEN!! Overtightening maydamage the camera
mounting holelocations.
Step3. Wireconnections:
Camera’sYellowsocketisconnected tovideoinput on monitorunit; Black socketisforthe power
connected toDC 12V.
A.Connect theyellow(RCA)socket tovideomonitorinputconnection, andthe black sockettothe
videomonitorpoweroutput connector,if the Rearviewmonitorunit hasautoreversecamera
poweron feature. (See WiringDiagram1.)

B.Connect theyellow(RCA)socket tovideomonitorinputconnection andthe blacksocket to
reverselight powerwirebyusing thepowerwire,if the Rearviewmonitordoesnot haveauto
reversecamerapoweron feature.When the vehicleisplaced inreverseposition, the camerais
powered on. (See WiringDiagram2.)
C.Connect theyellow(RCA)socket tocamerainput on Video SwitchControlunit (3VSC),if using
Rear, Left&Right 3camera’s, connectthe black socket toVideo SwitchBoxpowerdistributor
wirebaseonrear,left &right operatoroptions. (See WiringDiagram3.)
D. The powerconnection and videoconnectionsmaydepend on themonitorunitfeatures.Before
installingthe camera, pleasesee theinstructionsforthe monitorunit first.

TheBack upcamerasystemisstrictlyadriverassistantdevice. Itshouldnotbeconsidered
safetydevice foranypurposes. Manufacturerand distributorsoftheproductdo not
guarantee orassumeliabilityforcollisionordamages thattake place whenbackingup your
vehicle.
www.crimestopper.com
[e-mail]
Phone [phone]
FAX [phone]
©2007CrimestopperSecurityProducts
VER07.17.07
ONLINETECHNICALSUPPORT
www.crimestopper.com