CrimeStopper SV-5500 PC-B User manual

INSTALLATIONINSTRUCTIONS:
Part#SV-5600 PC-FFullFrameType(Black orChrome)
Part#SV-5500 PC-BTop BarType(BlackorChrome)
Part#SV-“PK”Kits withPlateCamand 3.5”LCD monitor
FEATURES:
•Revolutionarypatented designintegratesaColorrearvision camerawithyourrear
licenseplate
•Enhancethe lookof yourCar, SUV, Truck orVan.
•The 130°ultrawide-angleCCD colorcameraprovidesrearimagesinrealtimeand
eliminatesthedangerous“blind-spot”directlybehind yourvehiclewhen backing.
•Works dayornight, on most vehicles.
•Simpleinstallation: Nomajortoolsrequired. Video monitorrequired,notincluded.
•The platecameasilyconnectswithotherSecurViewproductsincludingthe SV-8000 2.5
inLCD rearviewmirrormonitor, 3.5”minimonitororyourexisting LCD/TFTdisplays.
•The PlateCam™isdesignedforvehiclesinwhichthe licenseplatelocationiscentered
and abovetheleveloftherearbumper.The PlateCam™maynotperformwell on
vehicleswithloworoffsetlicenseplatepositions.
USPatent#5574443, 6433680,6441872

DISCLAIMER:
Undernocircumstancesshall themanufacturerordistributorofthePlateCam™beheldliablefor
consequentialorincidentaldamagessustained inconnectionwiththeuseofthePlateCam™RearVision
System.ThePlateCam™isdesigned asasafetyenhancementdeviceandisinnowayintended asa
replacementforrear-viewmirrors,side-viewmirrorsorphysicallycheckingthesurroundingswhen
backing avehicle.Always checksurroundingsforsafetywhenbacking!Objectsonthemonitorare
closerthantheyappear.Forthebestfit, modification ofthe vehiclelicensemayormaynotbe
necessary.Itisthe soleresponsibilityofthe vehicleownertocheck andverifyanyandall Stateor
FederalMotorvehiclecodeswithregardstomodificationsof vehiclelicenseplates.Themanufacturerof
the PlateCam™assumesnoliabilityorresponsibilitywhatsoeverwithregardsmodificationsofthe
licenseplate.
OPTIONALACCESSORIES:
SV-40AB:Anadjustablebracketisavailableforvehiclesthatdo nothaveclearanceunderthe trunkliporthe
Licenseplatelighting assemblytoinstallthe PlatecamorBarCam.
SV-30EXT: 30 FTextension cableforvehiclesrequiring an extended cablerun.
HARDWARE/ PART LIST:
PARTS LIST:
2XTorxPin2.5"
SecurityBolt
2XTorxPin7/8"
SecurityBolt
2XPhillips
ModuleBox
Screw
4XSpacer/
Washer
2XNut
T-30 TorxL-KEY
SecurityPin
AdjusterBracket
SV-40AB ExtensionCable
SV-30EXT
2

INSTALLATIONNOTES (ReadFirst!):
MOUNTING:
1.The PlateCam™RearVisionSystemusesasuperwide-anglelensforbestall around
performance.TheCamerawill displaythefull widthofmostparkingspacesup to6feetor
evenwider.
2.The PlateCamisdesigned toworkbeston vehiclesthathavealicenseplatelocated atthe
centerand abovetherearbumper.If yourvehiclehasaplatelocation thatisoffsettothe left
side,rightside,oryourplateislocatedunderthe bumperthen thePlateCam™maynot
provideoptimumperformance.
3.Thedesignoftheframe(or“Bar”) itselfallowsthe cameratobeangledtowardstherear
“Blind Spot”behind thevehicle.Insomecasesadjustmentmaybenecessary.Anoptional
slottedadjusterbracket isavailableseparatelytoadjust yourframe(orbar).
CAMERA:
1.The Camerahasbuilt-incircuitrytoreversethe imagesoobjectsontherightofvehicle
appearon therightandobjectsontheleftappearon the left when lookingatastandard
monitor.(See ReverseImaging next sectionformoreinformation.)
2.The colorCCD cameraismaintenance-free, waterproof andvibrationresistant.
3.The cameraisNOTanightvisionInfra-redcamera,howeverthebackuplightsonyour
vehicleand/oranyambientlightintheareashouldallowthe systemtostill be usefulatnight
inmostinstallations.
4.The cameraiscompletelyelectronic.ThereareNO manualadjustmentsforfocus,etc.
REVERSE (MIRROR)IMAGING:
The PlateCam’sCamerahasbuilt-incircuitryto“mirror” the imagesoobjectsonthe rightofvehicle
appearon the rightand objectsontheleftappearon theleftwhenlooking atastandardmonitor.If
yourexistingmonitororin-dashmonitorhasareversecamerainput wherethemonitoritselfperforms
the mirrorimage,thenyourpicturewill notbe correct. Thisisduetothefactthe image isbeing
mirrored bytheplatecam and mirrored byyourmonitor.Check tosee if youcancontrolthesettings
inyourmonitortoturnoff themirrorimage feature.If youdonot, thenyourequirea”NormalImage”
cameramodule.TheNormalImage moduleisnotincludedinthekitand mustbe purchased
separately.
PICTUREQUALITY:
The 1/3”CCD cameraprovidesthebestqualitypictureavailable.Objectsonthemonitorarecloser
thantheyactuallyappear.
WIRING:
1.Carefullychooseahiddenout-of-sightlocation[possiblybehindtheplate]fordrilling the cable
hole.Somevehiclesmayhavean existinghidden rubbergrommetorplugavailabletoavoid
havingtodrill intothebody.Besuretodouble-check foranywiring orobstructionsbehind the
surfacewhereyouaregoingtodrill thecablehole.Usetherubbergrommet(included oncable)
tomakeawatertightsealforthecablewhereitpassesintothevehicle.
2.Chooseaconvenientplacetorunthecameracableuptheleft,rightorcenterofthe vehicle.As
aruleof thumb,trytoavoidmainfactoryharness loomsthatmaycontainhigh levelsorRFnoise
orinterference.
3.Asatime-saver,youcanconnectthecamerapowerattherearofthevehiclebehindthereverse
lights.TheWhitepowerwiregoestoReverseLight +12V,andtheBlack wiretoGround.
4.Run thevideo cabletoyourmonitor’svideo inputorreversecamerainput.
5.The minipowerplug isdesigned forusewithanoptionalSecurViewSV-70003-in/4-outAudio
Videoswitcherwithareversecameraport.Ifyou arenotusingtheSV-7000 simplycutoff the 2-
pinplugand connect theRed wiretoReverse(12V)powerand connect theblack wiretoChassis
ground.
3

Using the templateprovided:
1.Align the holesin thetemplatewiththe holes in the licenseplate.
2.Mark2small cut linesfromthe templateontothe top center ofthe plate.
3.Make2minor cuts in the top ofthe plate
4.Useplierstofold downthe metal flap down.
1.
2.
3.
4.
SIDE VIEW
LicensePlate
LongSecurity
CameraLens
Nut
Mounting
Surface
Cable
Short Security
Nut
ExistingScrew(s)
fromoldplate
Whenusingtheexistinglicenseplate
mountingscrews, attachtheframetothe
vehiclefirst, thenusetheshort boltsto
toattachtheplatetotheframe. See
inset above.
EXISTINGSCREWOPTION
Bolt
Bolt
PLATEMODIFICATION:
Forbestfit, aslight
modificationof the
licenseplateis
needed.Readthe
disclaimeron Page 1
2of these
instructionsbefore
attempting to
modifyyourplate!
ASSEMBLY:
Usethe diagrambelowasageneralguideforassemblingyourPlateCamSystem.Notea1/2“diameter
holeisrequiredtorunthecameracableinside the vehicle. Usearubbergrommet,silicon sealeror
rubberbodyputtytoensureawatertight sealaround thecameracable.
4

SPACERWASHERINSTALLATION:
SomeinstallationmayrequiretheuseofspacerwasherseithertospacethePlateCamawayfrom
bodywork,ortochange thecameraspointofview.Usethespacerwashersasneeded,see diagram
below.
SIDE VIEW
Mounting
Surface
SPACER/WASHERINSTALLATION
Camera's
viewing
angle
5

CONNECTIONS:
WHITE=+12VDC
FromReverseLight
12PinM/FConnectors CameraElectronics
4PinM/F
Connectors
CONNECTIONS:
PLATECAM
Plugfor
Optional
SecurView
SV-7000video
controller
VideoOut
toMonitor
BLACK=Chassis
Ground
OR:
6

KITSWITH3.5”LCDMONITOR:
RED
BLACK 12VReversePower Input
ChassisGround
Video infromPlateCam
3A MiniATC Fuse
SIDE VIEW: SV-8500 3.5"LCD Monitor Installation
WINDSHIELD
UNIVERSALMOUNTINGPOST
Settodesiredlocation
NoHardware Required
1.Choosedesired location and clean surface.
2.Remoteadhesivebackings frommount.
3.Firmlypress the againstmounting.
PeelAdhesive
Backing
PeelAdhesive
Backing
or Mounting
Surface
3.5"Monitor
TECH SUPPORT:[phone]
SPECIFICATIONS:
1/3inchCCD sensor
Sizes: FullFrame12.5Wx7”Hx1.8”DVideo Output:1.0VP-Pcomposite(75Ohmload)
Bar: 12.5Wx1.7”Hx1.8”DSupplyVoltage:+12VDC
WeightFull6Oz.)Bar:4Oz. PowerConsumption:180mAtyp.
Pixels: 512 (H)x492 (V) ElectronicShutter: 1/50 s–1/100000s
Resolution:>250,000 pixels WhiteBalance: Automatic
Morethan 330 TVlines GammaCorrection: 0.45
MinimumIllumination:1LUX/ F 1.2 S/NRatio:Morethan 48dB
LensType:Wide AngleOperating Temp:-13 to185 F(-25 to85 C)
Horizontal Angle: 130 GainControl: Automatic
Vertical Angle:90 Digital SignalProcessorw/10 BitA/DConverter
7

www.crimestopper.com
[e-mail]
Phone [phone]
FAX[phone]
©2007 CrimestopperSecurityProducts