Crosley Furniture CO7165 User manual

Outdoor Wicker Bar Stool
CO7165

PART LIST
A B C
Back
1 PC
Panel Seat Panel
1 PC
Left Stretcher
1 PC
HARDWARE LIST
EXTRA HARDWARE LIST
#1 #2 #3
Short Bolt
12 PCS 4 PCS
Flat Washer
16 PCS
M6*20mm M6mm
1 PC
M6mm
M6*45mm
Long Bolt Allen Wrench
DE
#1 #2 #3
Short Bolt
1 PC 1 PC
Flat Washer
1 PC
M6*20mm M6mmM6mm
M6*45mm
Long Bolt
#4
M6mm
Front Leg
1 PC
Cover of Seat
1 PC
F
Right Stretcher
1 PC
2
G
Cushion* Core of Seat Cushion
1 PC
* Please note cushion cover will ship separately.

A
B
D
#1
#3
#4
C
Step 1. Lay back panel (part A) down on a soft flat surface, such as carpet, as shown below. Attach
seat panel (part B) to back panel (part A) using long bolts (part #2), flat washers (part #3)
NOTE: Please do not fully tighten bolts until unit is fully assembled.
#3 x4
#4 x1
#2 x4
#2
#3
#4
A
B
Step 2. Attach left stretcher (part C) and right stretcher (part D) to back panel (part A) using
short bolts (part #1), flat washers (part #3) and allen wrench (part #4).
NOTE: Please do not fully tighten bolts until unit is fully assembled.
#1 x4
#3 x4
#4 x1
3
and allen wrench (part #4).

C
E
B
A
Step 3. Attach front leg (part E) to assembled unit (parts B,C & D) using short bolts (part #1),
flat washers (part #3) and allen wrench (part #4).
NOTE: Please fully tighten all bolts at this time.
D
#3 #1
#4
#1
#3
#4
#1 x8
#3 x8
#4 x1
4
Step 4. Insert core of seat cushion (part G) into cover of seat cushion (part F).
GF

Step 5. Carefully turn the stool upright and place seat cushion on the stool.
5