Crosley Furniture Kaplan CO6111 User manual

Outdoor Sofa
CO6111

HARDWARE LIST
Leg
PART LIST
A B CD
Back Panel
F
1 PC
Seat Panel
1 PC
Right Arm Panel
#2 #3 #5
Short Bolt
6 PCS (Extra 1)
Medium Bolt
4 PCS (Extra 1) 4 PCS (Extra 1)
Flat Washer
14 PCS (Extra 1)
M6*25mm M6mm
Cover of Seat
Cushion *
3 PCS
Core of Seat
Cushion
3 PCS
Cover of Back
Cushion *
3 PCS
Core of Back
Cushion
3 PCS
G
*Please note cushion covers will ship separately.
Left Arm Panel
1 PC
#1 #4
M6*15mm
Allen Wrench
1 PC
M6mm
Long Bolt
2
1 PC
M6*40mm
H
E
1 PC
I

Step 1.
Attach back panel (part A) to left arm panel (part D) using long bolts (part #3), flat
washers (part #4) and allen wrench (part #5).
NOTE: Please do not fully tighten bolts until unit is fully assembled.
Lay left arm panel (part D) down on a soft flat surface, such as carpet, as shown below.
Step 2.
medium bolts (part #2), flat washers (part #4) and allen wrench (part #5).
NOTE: Please do not fully tighten bolts until unit is fully assembled.
Attach seat panel (part B) to assembled unit (parts A & D) using short bolts (part #1),
#4 x2
#3
#5 x1
x2
#5
#1
#4
#4
#2
#5
#4 x6
#1
#5 x1
x2
#2 x4
#5
#3
#4
3
A
D
B
A
D

4
Step 3.
bolts (part #1), long bolts (part #3), flat washers (part #4) and allen wrench (part #5).
NOTE: Please fully tighten all bolts at this time.
Attach right arm panel (part C) to back panel (part A) and seat panel (part B) using short
#4 x4
#1
#5 x1
x2
#3 x2
#5
#1
#4
#4
#3
#5
B
A
C
Step 4.
(part #4) and allen wrench (part #5).
NOTE: Please fully tighten all bolts at this time.
Attach leg (part E) to seat panel (part B) using short bolts (part #1), flat washers
#4
#1
#5 #4 x2
#1
#5 x1
x2
B
E

GF
IH
Step 5. Insert core of seat cushions (part G) into cover of seat cushions (part F).
lnsert core of back cushions (part I) into cover of back cushions (part H).
Step 6. Carefully turn unit upright and add cushions as shown below.
5