Crosley Furniture CO9007A User manual

INSTRUCTION MANUAL
CO9007A

Assembly Instructions
WARNINGS:
•This fire bowl is intended for outdoor use only. Do not use on wooden decks.
•This fire bowl is intended to burn wood logs only. Do not burn coal, leaves, or other
combustible materials in the fire bowl.
•Not for use by children. Keep children and pets away from the fire bowl.
•The fire bowl is hot. Use with caution. Do not touch the hot fire bowl with bare hands.
•Never leave the burning fire bowl unattended, and always extinguish the fire completely before
leaving the fire bowl.
•Do not use near flammable or combustible objects or materials.
•When the fire bowl is in use, the handle on the mesh screen can reach extreme temperatures
that can cause serious injury to an unprotected hand. Use a poker or an appropriate heat
resistant glove or pad when handling.
•Check local fire regulations and municipal by-laws for safe use.
•Ensure all ashes are completely cool before removal.
•Wear gloves during assembly.
PARTS LIST
No. PARTS Qty
A Handle 1
B Mesh cover 1
C Grate 1
D Fire bowl 1
E Slate top 1
F Frame 5
G Base 1
H Poker 1
HARDWARE LIST
No. Hardware Qty
AA M6X12mm bolt 15
H
E
C
A
B
D
F
G
BB M6 Nut 1
Note: You will need a screwdriver to help with the assembly

Assembly Step
Step1:
Attach the Handle (A) to the Mesh Cover (B) using M6 Nut (BB).
Step2:Attach the Frame (F) to the Base(G) using M6 x12mm bolts (AA). Do not tighten the bolts at this
time. Repeat this step for the rest of the frames.
Step3:
Place the Slate Top (E) upside down on a soft place. Put the assembly base over the Slate
Top (E) and align bracket, fix by using M6 x12mm bolts (AA). Tighten bolts once they are
aligned in all the holes.
Step 4: Place the Fire Bowl (D), Grate (C) and Mesh Cover (B) into assembly base. The fire pit is now
ready for use.
A
B
BB
F
GAA
E
AA
B
C
D