CTC Union ITP-800-8PH24 User manual

ITP-800-8PH24
ITP-800-8PHE24
IP56 EN50155 8 x 10/100Base-TX
with 8 x PoE+ Ethernet Switch (Hardened)
Quick Installation Guide
[e-mail]

1
ITP-800-8PH(E)24 QIG
Version 1.3 (HWv1.1a) September, 2019
This QIG supports the following models:
- ITP-800-8PH24
- ITP-800-8PHE24
CTC Union Technologies Co.,Ltd.
Far Eastern Vienna Technology Center
(Neihu Technology Park)
8F, No. 60 Zhouzi St.,
Neihu, Taipei 114, Taiwan
T [phone]
F [phone]
[e-mail]
Hwww.ctcu.com
2019 CTC Union Technologies Co., LTD.
All trademarks are the property of their respective owners.
Technical information in this document is subject to change without notice.
To download this QIG, please visit https://www.ctcu.com/en/download.html

1
Table of Contents
Introduction...................................................................................4
Package List..................................................................................4
Features.........................................................................................4
Specifications................................................................................5
Panel ..............................................................................................7
PIN Assignment.............................................................................8
M12 Cable Connector Installation................................................9
LED Indicators.............................................................................10
Earth Ground Connection ..........................................................11
Wall-Mounting & Din-Rail Installation .......................................12
Application ..................................................................................13

4
Introduction
ITP-800-8PH(E)24 devices, designed for industrial grade applications, are
unmanaged Fast Ethernet PoE+ switches. ITP-800-8PH(E)24 Ethernet switches
provide 8 x 10/100Base-TX Fast Ethernet PoE+ ports that utilize M12 connectors to
ensure tight and robust connections against environmental disturbances such as
vibration and shock. ITP-800-8PH(E)24 Series Ethernet switches also comply with
EN50155 standard that covers strict demands on operating temperature, power
input voltage, surge, ESD, vibration, and shock, thus making these switches
suitable for industrial applications such as vehicle, rolling stock and railway.
Package List
One ITP-800-8PH(E)24 device with a wall-mounting bracket
Protective caps for UTP ports
Features
Use M12/M23 anti-vibration and anti-shock connector
24/48VDC (20~57VDC) redundant dual input power
Built-in very high efficiency (97%~98%) booster to provide PoE output voltage
at 50VDC
Regulate PoE output voltage (50VDC) to stabilize PoE-supported end devices
up to a distance of 100 meters
PoE output power budget 120W (Maximum)
Wide temperature range -40°C~75°C (ITP-800-8PHE24)
IP56 grade rugged housing against water
CE, FCC, EN50155 and EN50121-4 certified
Heavy Industrial grade EMS, EMI, EN61000-6-2, EN61000-6-4 certified

5
Specifications
Interface
Connector Type: 8 x M12 D-Code Female
Speed: 10/100Base-TX
Support Auto Negotiation and Auto MDI/MDI-X
Support 802.3x Flow Control
Support Half/Full Duplex
Store & Forward Data Processing
Switch
MAC Address Table: 1K
Packet Buffer Size: 448Kbits
Switching Fabric: 1.6Gbps
Power over Ethernet
8 x PoE enabled ports, M12 (4-Pin) D-Code Female
Supports IEEE802.3af 15.4watts PoE per port
Supports IEEE802.3at 30watts PoE+ per port
Maximum power budget 120W (30W per port)
Regulate PoE output voltage (50VDC) to stabilize PoE devices
Deliver PoE power up to 100 meters
Power
Connector Type: 1 x M23 (5-Pin) Male
Power Supply: Redundant Dual DC 24/48V (20~57VDC) input power
Support Power Input Reverse Polarity Protection
Support Overload Current Protection
Consumption:
Input
Voltage
Total Power
Consumption
Device Power
Consumption
PoE Budget
Boost
Efficiency
24VDC
125W
3.6W
120W
98%
48VDC
127W
4.3W
120W
97%

6
Mechanical
Housing: IP56 Waterproof Protection
Fanless Design
Dimensions: 67 mm (D) x 71.4 mm (W) x 219.5 mm (H)
Installation: Wall mounting & DIN-Rail (Optional accessory)
Weight: 715g
Environmental
Operating Temperature: -10°C~60°C (ITP-800-8PH24), -40°C~75°C (ITP-800-
8PHE24)
Storage Temperature: -40°C~85°C
Humidity: 5%~95% (Non-condensing)
Certifications
EMC: CE (EN55024, EN55032)
EMI (Electromagnetic Interference): FCC Part 15 Subpart B Class A, CE
Railway Traffic: EN50155, EN50121-4
Immunity for Heavy Industrial Environment: EN61000-6-2
Emission for Heavy Industrial Environment: EN61000-6-4
EMS (Electromagnetic Susceptibility) Protection Level:
EN61000-4-2 (ESD) Level 3, Criteria B
EN61000-4-3 (RS) Level 3, Criteria A
EN61000-4-4 (Burst) Level 3, Criteria A
EN61000-4-5 (Surge) Level 3, Criteria B
EN61000-4-6 (CS) Level 3, Criteria A
EN61000-4-8 (PFMF, Magnetic Field) Field Strength: 300A/m, Criteria A
EN61000-4-11 Voltage Dips
Safety: UL60950-1 (Pending)
Shock: IEC 61373
Freefall: IEC 60068-2-32
Vibration: IEC 61373
MTBF (MIL-HDBK-217)
937,878 Hours

7
Panel
Index
No.
Description
1
Wall mounting holes
2
Grounding screw
3
M23 power input port
4
Power port label
5
Power LED
6
M12 Ethernet ports
7
Ethernet port LED
8
PoE LED
9
Ethernet port label
Figure 1: Front Panel
1
1
4
3
2
7
5
9
8
6

8
PIN Assignment
M12 Fast Ethernet Cable
M12 Pin No.
RJ-45 Pin No.
Ethernet Pinout
PoE Pinout
1
3
TD+
V-
2
1
RD+
V+
3
6
TD-
V-
4
2
RD-
V+
NOTE: ITP-800-8PH(E)24 is a PSE device that can connect to PDs (Powered
Devices) or non-PoE devices. However, it is NOT recommended to connect ITP-
800-8PH(E)24 to another PSE device. By doing so, it may have potential risks to
cause device damages.
M23 Power Input Cable
M23 Pin No.
Pinout
Description
Color of Open Cable
1
V1+
24/48VDC
Black
2
V1-
Blue
3
C-GND
Green
4
V2+
24/48VDC
Brown
5
V2-
White
Model: CAB-M12DM4-RJ45
Model: CAB-M23F5-Open

9
M12 Cable Connector Installation
Before assembling M12 open cable, make sure you have the following M12
cable connector components (Model: M12D-M4 M12 D-Code Male) and open
cable at hand.
Assembly Steps:
Step 1. Insert the screw nut, O-ring, and housing into the cable in the order shown
in Figure 2 and keep them loose in this step.
Step 2. Strip the cable and the individual cores to fit the connector. Insert the
stripped wires into the opened contact clamps.
Figure 2: Insert components into the cable
Figure 3: Insert the stripped wires to contact clamps
Screw Nut
Housing
Male Contact
Connector
O-Ring

10
Step 3. Tighten the connector in clockwise direction, making sure that
the wires inside the connector are not twisted as the screwed housing is
assembled.
LED Indicators
LED
Color
Status
Description
PWR1
Green
On
Lit if power 1 is connected and active.
Off
Power is not connected.
PWR2
Green
On
Lit if power 2 is connected and active.
Off
Power is not connected.
Link/
ACT
Green
On
Lit when the LAN connected speed is 10M or
100M.
Blinking
Blinking if there is Ethernet traffic.
Off
No Ethernet link.
PoE
Green
On
Lit when the respective LAN port has successfully
negotiated PoE and is supplying output power to
the remote connected PD device.
Figure 4: Tighten the connector

11
Earth Ground Connection
An earth grounding connection hole is provided in the upper right-hand corner
of the front panel (See Figure 1) with an earth ground sign next to it. Grounding
the device can help to release leakage of electricity to the earth safely so as to
reduce injuries from electromagnetic interference (EMI).
Prior to connecting to the power, it is important to connect the ground wire to
the earth. Follow steps below to install ground wire:
Step 1. Make sure you have the grounding screw and grounding cable at hand.
Step 2. Unfasten the ground screw on the front panel.
Step 3. Attach the grounding screw to the ring terminal of the grounding cable.
Make sure that the grounding cable is long enough to reach the earth.
Step 4. Use a screwdriver (or other tools) to fasten the grounding screw on the
earth ground hole securely.
Figure 5. Earth Grounding Connection
Ring-type
terminal
Fork-type
terminal

12
Wall-Mounting & Din-Rail Installation
The PoE+ Ethernet Switch can be mounted on the wall or installed in DIN rail.
The wall mount bracket has been attached to the device. Therefore, there is no
need to install wall mount bracket (Figure 6).
Figure 6. Wall Mounting
When installing the DIN rail bracket (optional accessory), be sure to correctly
align the orientation pin (Figure 7). The DIN Rail bracket has a steel spring in the
upper rail of the bracket. This spring is compressed for mounting and un-mounting
by applying downward force.
Figure 7. Din Rail Figure 8. Mounting Figure 9. Un-mounting

13
Application
Figure 10. EN50155 PoE Switch in Smart Bus Application Diagram
NOTE: ITP-800-8PH(E)24 is a PSE device that can connect to PDs (Powered
Devices) or non-PoE devices. However, it is NOT recommended to connect ITP-
800-8PH(E)24 to another PSE device. By doing so, it may have potential risks to
cause device damages.

14
Version
Date
Description
v1.3
2019/9/26
Single-page format
Revise PoE budget (180W to 150W to
120W)
Regulate PoE output voltage (50VDC)
Revise power consumption
Add a note in page 8 & 13