Ctouch Canvas User manual

HEY YOU,
START
MEUP!
QUICK STARTGUIDE
REMOTE CONTROLFIRSTTIMEINSTALLATION
Switch the CTOUCH interactive
display power on or off
Confirm or enter a sub-menu or
toggle between options during
menu operation.
Switch to OPS
Display or exit the setting menu
screen
Mute the sound
Freeze the current picture
Volume down
Display or exit input source menu
Use Arrow buttons to navigate in
on-screen menu
Return to previous menu or exit
the on-screen menu
Turn off the picture on the
CTOUCH interactive diaplay and
listen to the program audio only.
Volume up
Switch ECO mode on/off
OTHER QUESTIONS
For User manual, other documentation or support, please visit support.ctouch.eu.
Share, inspire, have fun!
With CTOUCH by your side.
1. Network
Plug the LAN-cable into the LAN-port on the bottom or side of the CTOUCH display, to connect to the internet.
2. Settings menu
After switching on the CTOUCH display, access the settings menu to change the default settings:
- Press the settings button on the remote control or in the quick start menu to open the settings menu
- Use default pincode [0000] to gain access
It is advised to change default settings pincode
here and note down: Optionally change the menu language here:
3. Install CTOUCH BRIX
- Mount and install OPS PC
- Follow the installation procedure according to the license card provided with the BRIX
4. Whiteboard and sharing software
- Each Canvas screen is provided with a software license for whiteboarding software and wireless sharing
software
- Follow the installation procedure according to the license card provided with the Canvas screen to install
these packages on an OPS or an external PC
1556V201214 EN
CANVAS