Curt Manufacturing ECHO User manual

ECHO®BRAKE CONTROLLER QUICK SETUP
1. Download the mobile application
(scan respective QR code below)
2. Enable bluetooth on your mobile device
3. Attach safety strap and insert Echo into
vehicle 7-way socket (ensure LED is lit)
4. Pair app with your mobile device
5. Plug trailer's 7-way into the Echo
6. Configure profile settings
7. Test drive and adjustment
QUICK REFERENCE GUIDE

ACTIVE PROFILE SCREEN SETTINGS
1. Manual Brake Activation:
Activate manual braking,
press and hold the orange button.
2. Brake Output Indicator:
The blue ring indicates
current brake output level.
3. Max Output:
The maximum level of the brake controller
(adjustable in increments of five).
4. Sensitivity Level:
The sensitivity of the braking power
(adjustable in increments of one).
5. Vehicle Hazard Lights:
Turn on any time the vehicle's
hazard lights are active.
6. Screen Theme:
Change from light to dark (see settings menu).
1
2
345

LED STATUS INDICATOR
A single LED on top of the Echo®shows status of the brake controller.
Device paired,
trailer connected
(solid green)
Device not paired,
no trailer connected
(flashing blue)
Device not paired,
trailer connected
(flashing green)
Device paired,
no trailer connected
(solid blue)
Hardware fault
(solid red)
Wiring error
(flashing red)
Calibrating
Echo
(flashing yellow)
No power
(no light on)

Avoid distracted driving.
Only make adjustments when the vehicle is stationary.
51180-QR-RC
If any problems occur during setup or operation, refer to the
'Troubleshooting Guide' on the last page of the installation manual.
Use this PIN number when pairing the
Echo®brake controller with your device.
TROUBLESHOOTING
BLUETOOTH PIN
WARNING