CYBEX 8800 User manual

Product Number 8800/8810/8830/8840
Owner’s Manual
Strength Systems
Part Number 8800-999-4 G
www.cybexinternational.com

Product Number 8800/8810/8830/8840
Owner’s Manual
Strength Systems
Part Number 8800-999-4 G
Cybex®and the Cybex logo are registered trademarks of Cybex International, Inc.
DISCLAIMER: Cybex International, Inc., makes no representations or warranties regarding the contents of this manual. We reserve the right to
revise this document at any time or to make changes to the product described within it without notice or obligation to notify any person of such
revisions or changes.
© Copyright 2010, Cybex International, Inc. All rights reserved.
Printed in the United States of America.
10 Trotter Drive Medway, MA 02053 • 508-533-4300 • FAX [phone]
www.cybexinternational.com • [email protected] • 8800-999-4 G • October 2010

1 Safety
Safety ......................... 1-1
Safety Guidelines and Practices. . . . . . . 1-2
Warning/Caution Decals .......... 1-3
Regular Maintenance Activities..... 1-5
Using Proper Form .............. 1-5
2 Exercises
Intended Use. . . . ............... 2-1
Instructions. . . . . . . . . . . . . . . . . . . 2-2
3 Customer Service
Contacting Service .............. 3-1
Ordering parts .................. 3-1
Return Material Authorization (RMA). 3-2
Damaged Parts ................. 3-2
4 Assembly . . . . . . . . . . . . . . . . . . . . . 4-1
5 Maintenance
Daily Procedures ................ 5-1
Weekly Procedures .............. 5-4
Yearly Procedures ............... 5-5
Cable Adjustment . . . . . . . . . . . . . . 5-6
Environment. . . . . . . . . . . . . . . . . . . 5-7
Storage . . . . . . . . . . . . . . . . . . . . . . 5-7
Table of Contents
Page i

Product Number 8800/8810/8830/8840 Owner’s Manual
Safety
Page 1-1
1 - Safety
Safety
Read the Owner’s Manual carefully before assembling, servicing or using the equipment.
It is the responsibility of the facility owner and/or owner of the equipment to instruct users on proper
operation of the equipment and review all labels.
WARNING: Serious injury could occur if these safety precautions are not observed:
User Safety Precautions
Obtain a medical exam prior to beginning an exercise program.•
Read and understand warning labels and user manual prior to exercising. Obtain instruction• prior to use.
Keep body and clothing free from and clear of all moving parts.•
Inspect machine prior to use.• DO NOT use if it appears damaged or inoperable.
DO NOT• attempt to fix a broken or jammed machine. Notify floor staff.
Use the machine only for the intended use.• DO NOT modify the machine.
Be sure that the weight pin is completely inserted. Use only the pin provided by the manufacturer.• If unsure seek assistance.
Never pin the weights in an elevated position.• DO NOT use the machine if found in this condition.
See assistance from floor staff.
Children must not be allowed near these machines. Teenagers must be supervised.•
DO NOT• use if guards are missing or damaged.
DO NOT• use dumbbells or other incremental weights, except those provided by the manufacturer.
Inspect all cables and belts and connections prior to use.• DO NOT use if any components are worn,
frayed or damaged.
DO NOT• remove any labeling from equipment. Replace any damaged labels.
Stop exercising if you feel faint, dizzy or experience pain at any time while exercising and consult• your physician.
Facility Safety Precautions
Read the Owner’s Manual carefully before assembling, servicing or using the equipment.•
Securely anchor each machine to the floor using the anchor holes provided in each machine.•
NOTE: Cybex is not responsible for the actual anchoring of equipment. Consult with a
professional contractor.
NOTE: Use fasteners having a minimum of 500 lbs. tensile capacity (3/8” grade 2 bolts or
better).
NOTE: If legs/frame does not contact surface, DO NOT pull down with anchors. Shim any
leg or frame not in contact with surface using flat washers.

Product Number 8800/8810/8830/8840 Owner’s Manual
Safety
Page 1-2
Make sure that each machine is set up and operated on a solid level surface.• Do not install
equipment on an uneven surface.
Make sure that all users are properly trained on how to use the equipment.•
Make sure there is enough room for safe access and operation of the equipment.•
Perform regular maintenance checks on the equipment. Also pay close attention to all areas most• susceptible to wear, including (but not limited to) cables, pulleys, belts and grips.
Immediately replace worn or damaged components. If unable to immediately replace worn or• damaged components then remove from service until the repair is made.
Use only Cybex supplied components to maintain/repair the equipment.•
Keep a repair log of all maintenance activities.•
Inspect all cables and belts and connections prior to use.• DO NOT use if any components are worn,
frayed or damaged.
NOTE: It is the sole responsibility of the user/owner or facility operator to ensure that regular
maintenance is performed.
Safety Guidelines And Practices
Cybex recommends that all fitness equipment be used in a supervised area. It is recommended that the
equipment be located in an access controlled area. Control is the responsibility of the owner. The extent
of control is at the discretion of the owner.
It is the responsibility of the purchaser/user of Cybex products to read and understand the owner’s
manual, and warning labels; as well as instruct all individuals, whether end users or supervising
personnel, on proper usage of the equipment.
PROPER USAGE:
Use machine only as described in the manual. Failing to follow proper instructions may result in injury.
Do Not Lean Against or Pull On the framework, weight stack, or any component, whether machine is at
rest or in use. Inappropriate or improper use may result in injury to users or third parties (bystanders).
Do not use machine if it is not located on a solid level surface or is improperly installed.
Provide an adequate safety perimeter between the machine, walls and other equipment to ensure that
the facility has the proper clearance for usage and training.
SECURING EQUIPMENT:
The machine has holes in the feet, which allow for ease in anchoring to the floor. Cybex strongly
recommends that, to eliminate rocking, tipping or falling over due to incorrect usage and misuse,
equipment be secured to a solid, level surface.
1. The solid, level surface should not deviate more than 1/8” over a 10’ distance or as defined and
required by local building and architectural codes.
2. Anchoring of equipment must be completed by a qualified licensed contractor.

Product Number 8800/8810/8830/8840 Owner’s Manual
Safety
Page 1-3
3. Anchoring holes are provided on the feet of the frame. All anchoring locations must be used when
anchoring the equipment to the floor.
4. Due to the wide variation of flooring on which machines may be anchored or installed, verify
anchoring method and anchoring fasteners with a qualified and licensed contractor.
5. A minimum pull out force of 220 lbs/100 kgs is required for each anchor position..
6. Do not use machine until it is properly anchored.
MAINTENANCE:
Preventative maintenance allows proper equipment operation and reduces the risk of injury. Perform the
maintenance requirements as specified in the manual.
STANDARD COMPLIANCE:
Cybex products meet or exceed applicable ASTM and EN Standards.
Warning/Caution Decals
Warning decals indicate a potentially hazardous situation, which, if not avoided, could result in death or
serious injury.
Caution decals indicate a potentially hazardous situation, which, if not avoided, could result in minor or
moderate injury.
The warning and caution decals are shown on the following page. The diagrams following the decals
show where each decal is located.

Product Number 8800/8810/8830/8840 Owner’s Manual
Safety
Page 1-4
A
B
C

Product Number 8800/8810/8830/8840 Owner’s Manual
Safety
Page 1-5
A. Warning Label....................4605-381-4
B. Caution Decal.....................8500-025-4
C. Caution Decal.....................8800-442-4
Description Part No.
8800/8810
B
A
(both sides) (both sides)
B
B
B
C

Product Number 8800/8810/8830/8840 Owner’s Manual
Safety
Page 1-6
Regular Maintenance Activities
Preventative maintenance activities must be performed to maintain normal operation of your equipment.
Keeping a log sheet of all maintenance actions will assist you in staying current with all preventative
maintenance activities. The preventative maintenance actions are described in detail in Chapter 5.
Briefly, they include:
Daily
1. Clean upholstery.
Weekly
1. Inspect all nuts and bolts for looseness. Tighten as required.
2. Inspect all cables and belts for damage or wear (see Chapter 5). If a cable or belt is worn
or damaged, immediately discontinue use until cable or belt has been replaced.
3. Check for worn handles, worn snap links, and worn warning labeling. Replace all worn parts
immediately.
4. Inspect for loose or worn grips. Replace all loose or worn grips immediately.
5 Inspect weight stacks for proper alignment and operation. Correct all improper alignment
and operation issues immediately.
6. Lubricate guide rods using automotive engine oil only.
Yearly
1. Replace all cables and belts at least annually.
Using Proper Form
Before working out, read and understand the exercises located on the placard and in Chapter 2.

Product Number 8800/8810/8830/8840 Owner’s Manual
Exercise
Page 2-1
Intended Use
The intended use of this equipment is to aid or improve general physical fitness and exercise. For
Commercial use.
Instructions
Read and understand all instructions and warnings prior to using this machine. See Chapter 1, Safety, in
the Owner’s Manual or consult with floor staff.
2 - Exercise
• Select appropriate resistance.
• Adjust handles for proper pulley height.
• Rotate pulleys to desired angle.
• Adjust stabilization arm to desired angle.
• Adjust stabilization pad to desired position.
• Ensure all adjustment knobs are locked into place
NOTE: Position stabilization arm and pad all the way in and all the way down when not in use.
CHEST PRESS ROW
SEATED PRESS ARM CURL

Product Number 8800/8810/8830/8840 Owner’s Manual
Exercise
Page 2-2
ARM EXTENSION TRUNK ROTATION
SQUAT HIP ABDUCTION
HIP ADDUCTION HIP FLEXION-KNEE EXTENSION
HIP EXTENSION-KNEE FLEXION TRUNK FLEXION
TRUNK EXTENSION

Product Number 8800/8810/8830/8840 Owner’s Manual
Customer
Service
Page 3-1
Contacting Service
Hours of phone service are Monday through Friday from 8:30 a.m. to 6:00 p.m Eastern Standard Time.
For Cybex customers living in the USA, contact Cybex Customer Service at 888-462-9239.
For Cybex customers living outside the USA, contact Cybex Customer Service at 508-533-4300 or fax [phone].
Find information on the web at www.cybexintl.com or e-mail at [email protected].
Ordering Parts
Fax orders to 508-533-5183. To speak with a customer service
representative, call 888-462-9239 (for customers living within
the USA) or 508-533-4300 (for customers outside the USA).
You may also contact us through e-mail at
[email protected].
Having the following information ready when calling, will assist our
Cybex representatives in serving you.
Unit Serial Number•
Product Name•
The unit serial number and product name can be found on the serial number decal.
Part Description•
Part Number•
Part descriptions and part numbers are located on the web at www.cybexintl.com.
Shipping Address•
Contact Name•
In addition to your shipping address and contact name, your account number is helpful but not required.
Return Material Authorization (RMA)
The Return Material Authorization (RMA) system outlines the procedures to follow when returning
material for placement, repair or credit. The system assures that returned materials are properly handled and analyzed.
Follow the following procedures carefully.
Contact your authorized Cybex dealer on all warranty-related matters. Your local Cybex dealer will request a RMA from
Cybex, if applicable. Under no circumstances will defective parts or equipment be accepted by Cybex without proper
RMA and an Automated Return Service (ARS) label.
3 - Customer Service
NOTE: All inspections
and repairs must be
performed by trained
service personnel only.
Cybex will void warranty if
non-Cybex replacement parts
a
r
e
used
.

Product Number 8800/8810/8830/8840 Owner’s Manual
Customer
Service
Page 3-2
1. Call the Customer Service Hot Line listed above for the return of any item that is defective.
2. Provide the technician with a detailed description of the problem you are having or the defect in the item you wish
to return.
3. Provide the model and serial number of your Cybex equipment.
4. At Cybex’s discretion, the technician may request that you return the problem part(s) to Cybex for evaluation and
repair or replacement. The technician will assign you a RMAnumber and will send you anARS label. The ARS
label and the RMA numbers must be clearly displayed on the outside of the package that contains the item(s) to be
returned. Include the description of the problem, the serial number of the equipment and the name and address of
the owner in the package along with the part(s).
5. Forward the package through UPS to Cybex.
Attn: Customer Service Department
Cybex International, Inc.
1975 24th Ave SW
Owatonna, MN 55060
NOTE: Merchandise returned without an RMA number on the outside of the package or shipments sent COD will not be
accepted by the Cybex receiving department.
Damaged Parts
Materials damaged in shipment should not be returned for credit. Shipping damages are the responsibility of the carrier
(UPS, Federal Express, trucking companies, etc.)
Apparent Damage - Upon receipt of your shipment, check all items carefully. Any damage seen with a visual check must
be noted on the freight bill and signed by the carrier’s agent. Failure to do so will result in the carriers refusal to honor your
damage claim. The carrier will provide you with the required forms for filing such claims.
Concealed Damage - Damage not seen with a visual check upon receipt of a shipment but notices later must be reported
to the carrier as soon as possible. Upon discovery of the damage, a written or phone request to the carrier asking them to
perform an inspection of the materials must be made within ten days of the delivery date. Keep all shipping containers and
packing materials as they will be needed in the inspection process. The carrier will provide you with an inspection report
and the necessary forms for filing a concealed damage claim. Concealed damage claim is the carrier’s responsibility.
Cybex, if applicable. Under no circumstances will defective parts or equipment be accepted by Cybex without proper RMA
and an Automated Return Service (ARS) label.

4-1
Product Number 8800/8810/8830/8840 Owner’s Manual
4 - Assembly
NOTE: Two people will be required to perform this
procedure.
NOTE: It is the responsibility of the facility
owner/owner of the equipment to ensure
that there is appropriate clearance around
each machine to allow for safe use and
passage.
1. Read and understand all instructions
thoroughly before assembling this product.
2. Verify the appropriate configuration was
received:
Correct color of machine.A.
Proper weight stack and weight stack decals.B. Standard Stack - Weight Pack #13000-041
Graduated Stack - Weight Pack #13000-039 and
Weight Pack #13000-040
Appropriate owner’s manual.C.
Warranty sheet.D.
Verify which machine was received 8800 or 8830E. (Chin-Up Bar Installed) or 8810 or 8840 (With
Chin-Up Bar).
3. Move to desired location.
NOTE: If machine is an 8800/8830 and does not fit through doorway proceed to step 10.
NOTE: If machine is an 8810/8840 and does not fit through doorway proceed to step 10J - 10P. Proceed to
step 13 to install Chin-Up Bar.
NOTE: If machine is an 8810/8840 install Chin-Up Bar. Proceed to step 13 to install Chin-Up Bar.
4. Remove shipping pallet.
WARNING: Use extreme caution when removing shipping pallet. Failure to do so could result in injury.
With an assistant, using a 9/16” wrench, carefully remove each lag bolt securing frame toA. pallet.
7/32” Allen wrench• 3/4” Socket• Hammer• 3/16” Pin punch• 9/16” Wrench• Loctite #242•
Tools Required
6
100 45.0
20 9.0
40.5
22.5
31.5
27.0
36.0
40 18.0
13.5
80
70
60
50
10
90
30
4.5
250 113.5
147.5
140.5
265
127.0
120.0
325
310
295
280
130 59.0
106.5
79.0
93.0
86.0
100.0
160 72.5
65.5
220
205
190
175
115
235
145
52.0
134.0
5
7
1
2
3
4
8
10
9
11
13
14
12
1 2 12090-322 FOOT PAD
2 2 13000-353 FOOT PAD
3 1 13000-355 FOOT PAD
4 1 13000-354 FOOT PAD
5 1 13000-551 DECAL, STANDARD (160-200)
6 1 4800-557 DECAL, STANDARD (10-150)
7 16 4700-337 WEIGHT PLATE (STANDARD)
7 9 4700-337 FOR GRADUATED STACK
8 15 4700-338 FOR GRADUATED STACK
9 1 13000-554 DECAL, GRADUATED (10-100)
10 1 13000-555 DECAL, GRADUATED (115-325)
11 8 12210-352 PLASTIC INSERT
12 2 8830-317 WEIGHT SPACER TUBE
13 2 HS760106 WASHER, FLAT 1.75 X .688 X .140
14 2 JS497600 WASHER 1.19 ID X 1.75 OD X .12
STANDARD STACK ONLY - items 5, 6, 7 (qty - 16), 11, 12, 13 and 14
GRADUATED STACK ONLY - items 7 (qty - 9), 8, 9 and 10
ITEM QTY PART NO. DESCRIPTION

Product Number 8800/8810/8830/8840 Owner’s Manual
4-2
Carefully place frame on floor.B.
Carefully place rubber feet (supplied with machine) on each foot of the frame.C.
5. Securely anchor machine to the floor.
Securely anchor machine to the floor using the anchor holes provided in each machine.A.
NOTE: Cybex is not responsible for the actual anchoring of equipment. Consult with a professional contractor.
NOTE: Use fasteners having a minimum of 500 lbs tensil capacity (3/8” grade 2 bolts or better).
NOTE: If legs/frame does not contact surface, DO NOT pull down with anchors. Shim any leg or frame not in
contact with surface using flat washers.
6. Install weight plates.
Using a 7/32” Allen wrench, remove the two ButtonA. Head Socket Cap Screws (BHSCS) securing the
top cap to the frame. See Figure 1.
Remove top cap and BHSCS and set aside.B.
Carefully lift shroud up and out of machine.C.
Slide spring loaded guide rod cap down guideD. rod until cap is clear of frame. NOTE: Guide rod
cap is spring loaded.
Figure 2
Figure 1
BHSCS
Top Cap Shroud
Compression
Spring
Guide
Rod Cap
Guide
Rod Cap
Compression
Spring
Slowly release graspE. of guide rod cap.
See Figure 2. NOTE:
Guide rod cap
contains a
compression spring
that will fly if grasp is
not released slowly.
Remove guide rodF. cap and spring and
set aside.
Repeat steps 6D - 6FG. for other guide rod.
Guide Rods

4-3
Product Number 8800/8810/8830/8840 Owner’s Manual
Using a 3/16” pin punch and hammer, carefully remove roll pin securing cable end to top weight connec-H. tor. See Figure 3.
Carefully lean guide rods slightly outward.I. NOTE: Excessive pressure on guide rods may
damage lower guide rod caps.
Slide top weight up and out of machine and carefully set aside.J.
Have an assistant hold guide rods vertical.K.
NOTE: Standard Weight Stack only - See steps 6L - 6P and Figures 4 and 7.
NOTE: Graduated Weight Stack only - Skip steps 6L - 6P.
Slide weight stack bumpers up and out of machine.L.
Install washer (#14) and weight spacer tube (#12) onto each guide rod.M.
Install the four plastic inserts (#11) onto each guide rod.N. NOTE: The plastic inserts will slide inside the
weight spacer tube.
Install flat washer (#13) onto each guide rod.O.
Re-install weight stack bumpers.P.
Figure 3
Cable End
Top Weight
Connector
Roll Pin
Figure 4
Guide Rod
# 13
Weight Stack Bumper
# 11
(4x)
# 12
# 14

Product Number 8800/8810/8830/8840 Owner’s Manual
4-4
7. Install weight plate decals.
NOTE: You have the option to use pounds, kilograms or both.
Slowly and carefully peel off back side of decal. See Figure 6.A. NOTE: When peeling off back cover, make sure that the decals
remain attached to the front sticker.
Align holes in decal with appropriate holes in weight stack.B. NOTE: Do not allow the adhesive to touch weight stack at
this time.
Insert a guide pin through each hole of the template.C. NOTE: A guide pin can be anything that fits through the weight stack hole, such as a weight stack
selector pin.
Carefully align decal and rub it onto weight plates.D.
Carefully remove front side, leaving decals adhering to weight plates. See Figure 7.E.
Carefully align weight plates over guide rods and slowly lower each weight plate.Q. NOTE: When installing weight plates, position plates so wide edges of bushings face upward and narrow
edges of bushings face downward. See Figures 5a and 5b.
NARROW bushing edge
WRONG
WIDE bushing
edge faces upward
CORRECT
NOTE: The narrow bushing
edge must face downward.
Figure 5a Figure 5b
Figure 6
Front
Back
Repeat step 6Q for each weight plate.R.
Carefully slide top weight (removed in step 6J) over guide rods.S.
Figure 7
Standard
Weight
Stack
Pounds
Kilograms Kilograms
Pounds
Graduated
Weight
Stack