CYCLOPS Paralyzer 205 User manual

TRANSPONDER IMMOBILISER
USER INSTRUCTIONS
CYCL PS
VEHICLE SOLUTIONS
PROUDLY
AUSTRALIAN

TRANSPONDER IMMOBILISER
Security System
CYCLOPS PARALYSER 205
User Instructions
Congratulations on having one of the world's most advanced
and unique Australian designed and engineered vehicle security
systems, installed in your vehicle!
The Cyclops Paralyser 205 has been tested to and meets
Australian Standards 4601:1999.
CYCL PS
VEHICLE SOLUTIONS

DISARMING
To disarm the P205, simply switch on the vehicle's engine.
The small transponder tag attached to your key chain will
comeincloseproximitytothereceiverantennalocatedbelow
the ignition switch. The P205 will decode the signal from the
taganddisarm.TheredstatusLEDwillextinguishandtheengine
canbestarted.Ifthe engine is not started within 39 seconds the P205
willautomaticallyre-arm.
ARMING
The P205 will automatically arm within 39 seconds of the ignition being
switchedoff.
ENGINEIMMOBILISATION
When the system is armed the engine is immobilised. The two independent,
normallyopencircuitsofimmobilisation ensures the engineisstarvedofeither
fuel or spark. Immobilisation points vary from vehicle to vehicle; common
engine kill places include fuel injection, fuel pump, fuel cut-off solenoids, main
ignitionfeed,low-tensiondistributorsuppliesandstartermotorsolenoidsetc.

OVERRIDE
The system can be overridden by means of a Personal Identification Number
(PIN). Every unit is supplied with its own PIN. It is important to make a note of
thisPINorkeepthecardsuppliedwiththeunitinasafep1aceasitalsohasthe
PINdetailedonit.
**Anydigitmarked'0',indicates10flashes.
OVERRIDEPROCEDURE
!Insert the ignition key into the ignition switch and turn to the ON position. The
redstatusLEDmountedonthedashwillglowconstantly.
!Turn the ignition key back to the ACC position, the status LED will begin to
flash slowly. Count the number of flashes for the first digit in the PIN of the
P205.
!ReturnthekeytotheONpositionwhenthecorrectnumberiscounted.
!Repeat step 2 for all remaining digits in the PIN. When all four digits are
entered, the status LED will flash very quickly. If ignition is left in ON position
for15seconds,theP205willdisarm.ThestatusLEDwillextinguish.

PROBLEM SOLVING
System won't disarm (LED won't flash or extinguish)
!Make sure that ignition switch is in the OFF position.
!Make sure the vehicle battery is not flat.
!Try your spare transponder tag.
!Use PIN to over-ride and contact you nearest Cyclops service centre.
SPECIFICATIONS
Manufactured by Dynamco Pty Ltd
Model Number Paralyser 205
Standards met AS/NZS 4601:1999
Supply voltage +12VDC
Current consumption less than 10mA (when armed)

ANNUALINSPECTION
Dynamcopridesitselfonthe durability and integrity of its car security systems.
WewelcomeuserstocontactaCyclopsservicecentreeverytwelvemonthsfor
anannualinspection.(Pleasenoteachargemaybeleviedforthisinspection)
1st Inspection
Date:
Venue:
Comment:
Signed:
2nd Inspection
Date:
Venue:
Comment:
Signed:

WARRANTY
Subject to the conditions stated below, to be free from manufacturing defects and faulty material within the
warrantyperiodstatedbelow.
CONDITIONS
!That the warranty registration has been completed in full at the time of purchase and / or installation and is
producedwhenwarrantyserviceissought.
!The warranty does not cover general maintenance such as cleaning of bonnet switches, door switches, light
switchesetc,norreplacementofconsumableitemssuchaspilotlampsortransmitterbatteries.
!Thiswarrantyshallbenullandvoidif:-
!The product has been repaired by any other person other than by an authorised Cyclops service centre.
!Should a defect become apparent within the warranty period Dynamco Pty Ltd will repair the product free of
chargeforpartsandlabour.Shouldamobileserviceberequired,acall-outchargemayapply.
!Theproducthasbeenalteredortamperedwithinanywayortheserialnumberaltered,defacedorremoved.
!Thedefecthasbeencausedbynegligencebytheownerortheiragent.
!Theproducthasnotbeenoperatedcorrectly,installedbyanauthorisedCyclopsinstallerorhasbeensubjected
tomisuseorunduewearandtear.
!Siren,controlmoduleoranysystempartisdamagedbywater.
THEWARRANTYDOESNOTCOVERTHEFOLLOWINGCOSTS:-
!TransportoftheproducttoandfromCyclopsservicecentres.
!InsuranceoftheproduceintransittoorfromtheCyclopsservicecentres.
!CostofanyservicecallwheretheproductisfoundbyCyclopstobeingoodworkingorder.
The benefits conferred by this warranty are in addition to all other rights and remedies, which the consumer has

WARRANTY REGISTRATION
PURCHASED FROM
OWNER’S NAME
TYPE OF VEHICLE
VEHICLE REGO
MODEL OF UNIT
DATE OF INSTALL’
WARRANTY PERIOD :
AFTER HOURS EMERGENCY PHONE
CONTROL MODULE
TRANSPONDERS