CYmodel BEAVER CY8043B User manual

SAFETY PRECAUTIONS
This radiocontrol modelis nota toy!
lFirst-time buildersshould seekadvice frompeople havingbuilding
experience inorder toassemble themodel correctlyand toproduce
its performanceto fullextent. ,
lAssemble thiskit onlyin placesout ofchildrens reach!
lTakeenough safetyprecautions priorto operatingthis model.
,
You areresponsible forthis models assemblyand safeoperation!
lAlways keepthis instructionmanual readyat handfor quick
reference,even aftercompleting theassembly.
lCould causeserious injuryor evendeath
SPECIFICATION
Wing Span:3000mm (118.1in)
2
Wing Area:102.9dm(1 549.6sq.in)
Total Length: 1970 mm (77.6 in)
Engine :80-100cc gas engine
Radio : 5channels ,9 servos(landplane)
6channels ,11servos(floatplane)
BEAVER
ALMOST - READY - TO - FLYALMOST - READY - TO - FLY
Before commencing assembly,please read these instructions thoroughly.
Thank you for choosing CYmodel
Global : www.cymodel.com
Australia : www.austars-model.com
Italia : www.biellaexpress.com
Instruction Manual
Item Nr: CY8043B

22
REQUIRED FOR OPERATION (Purchase separately)REQUIRED FOR OPERATION (Purchase separately)
TOOLS REQUIRED ( Purchase separately)TOOLS REQUIRED ( Purchase separately)
BEFOREYOU BEGINBEFOREYOU BEGIN
Sharp Hobby Knife Phillips Screw Driver Awl
Needle Nose Pliers Wire Cutters Scissors
Read through the manual before you begin ,so you will have an overall idea of what to do.
Check all parts .if you find any defective or missing parts .contact your local dealer.
Symbols used throughout this instruction manual,comprise.
11
22
33
.
.
.
Warning!
£¡
Cut off shaded portion.
Ensure smooth non-binding
movement while assembling.
Must be purchased
separately!
Pay close attention
here!
Drill holes with the specified
Diameter(here:2mm)
2mm
Assemble left and right
Sides the same way.
Apply instant glue
(CA glue,super glue).
Apply epoxy glue.
BA
Cut off excess.
!
Do not overlook this symbol.
11
Aminimum 5channel radio for airplanes (with 9servos).
And dry batteries.
CAUTION: Only use a minimum 5channel radio for
airplanes! (No other radio may be used!)
!
12 AA-size Batteries
Aminimum 5 channel
transmitter for airplanes.
22
For handing the radio properly.refer to its instruction manual.
Engine and Muffler
Muffler Glow plug
33
Purchase a propeller that
will match your engine
44
Silicone Tube Fuel Filter
55
Required for engine starting Glow engine fuel only.
WARNING: Normal gasoline cannot
be used with glow engines.
!
Fuel Pump Plug Wrench
33
Glue
66
Instant glue Epoxy Glue
33
Other equipment for enhancing
airplane operation & perormance
77
12V Battery (for starter)
Engine Starter
Propeller splinner
MA
odel irplane engine
Ignition
80-100cc gas engine

!
3
2
Install the aileron and flap
1
5
4
33
Main wing
Hinge - - - - - - 18
Install the servo of aileron and flap
Top view
Bottom view
Install the elevator
Install the servo of aileron and flap
Servo line
25X1195mm tube
Bottom view
Hinge - - - - - - 8
Hinge
Accessory list for this page.
L
R
L
R
The servomust bepurchase separatelyThe servomust bepurchase separately
L
R
Horn
Rod adjuster
Connecting rod head
2.5X85mm rod
4X35mm screw
3X10mm Screw
3X14mm Screw
3mm Lock nut
- - - - - - 4
- - - - - - 4
- - - - - - 8
- - - - - - 4
- - - - - - 4
- - - - - - 4
- - - - - - 4
- - - - - - 4
- - - - - - 4
558mm washer
- - - - - - 4
8mm nylon Nut
- - - - - - 4
55
4mm4mm
4mm4mm
A B
A B
A B
Horn
Rod adjuster
Connecting rod head
2.5X85mm rod
4X35mm screw
3X10mm Screw
3X14mm Screw
3mm Locknut
- - - - - - 4
- - - - - - 4
- - - - - - 8
- - - - - - 4
- - - - - - 4
- - - - - - 4
- - - - - - 4
- - - - - - 4
- - - - - - 4
8mm washer
- - - - - - 4
8mm nylon Nut
- - - - - - 4
- - - - - - 26

!
8
710
99
44
6
Accessory list for this page.
Install the elevator
4X20mm Screw
- - - - - - 2
4mm washer
- - - - - - 2
12.5X325mm tube
Install the tail wheel
Install the rudder
Hinge - - - - - - 3
55
Diameter
3mm3mm
3.2mm Nylon Collar
3.2mm Collar
3X3mm Screw
- - - - - - 2
- - - - - - 1
- - - - - - 2
45mm wheel
- - - - - - 1
3.2mm Nylon Collar
3.2mm Collar
3X3mm Screw
- - - - - - 1
- - - - - - 1
- - - - - - 2
Install the tail wheel
3.2mm Rocker
- - - 1
Horizontal/Vertical tail
Securely glue together
,if coming off during flights.
You lose control of your airplane
which leads to accidents!
AA
AA
3mm3mm
A B
4X20mm Screw
- - - - - - 2
4mm washer
- - - - - - 2
3.2mm Nylon Collar
3.2mm Collar
3X3mm Screw
- - - - - - 3
- - - - - - 2
- - - - - - 4
3.2mm Rocker
- - - 1
Hinge
45mm wheel
- - - - - - 1
- - - - - - 3

!
13
12 15
14
11
55
Accessory list for this page. Install the rod of elevator
Rod
2X8mm screw
- - - - 2
- - - - 2
Rod adjuster
- - - - 2
Aluminium tube
- - - - 2
1500mm Steel wire
- - - - 2
2.3X10mm Tp screw
- - - - - - 4
The cover
Install the servo of rudder and tail wheel
Install the servo of rudder and tail wheel
Rod
2X8mm screw
- - - - 2
- - - - 2
Rod adjuster
- - - - 2
Aluminium tube
- - - - 2
The servomust
be purchase
separately
The servomust
be purchase
separately
Install the servo of elevator
Horn
Rod adjuster
Connecting rod head
4X35mm screw
3X10mm Screw
3X14mm Screw
3mm Lock nut
- - - - - - 2
- - - - - - 2
- - - - - - 4
- - - - - - 2 - - - - - - 2
- - - - - - 2
- - - - - - 2
- - - - - - 2
1187mm
2.5X100 rod 2.5X310 rod
5X3X870 carbon rod
- - - - - 2 - - - - - 2
- - - - - 2
Install the servo of elevator
The servomust be
purchase separately
The servomust be
purchase separately
4mm4mm
4mm4mm
A B A B
Rod
2X8mm screw
- - - - 4
- - - - 4
Rod adjuster
- - - - 4
Aluminium tube
- - - - 4
1500mm Steel wire
- - - - 2
2.3X10mm Tp screw
- - - - - - 4 Horn
Rod adjuster
Connecting rod head
4X35mm screw
3X10mm Screw
3X14mm Screw
3mm Lock nut
- - - - - - 2
- - - - - - 2
- - - - - - 4
- - - - - - 2
- - - - - - 2
- - - - - - 2
- - - - - - 2
- - - - - - 2

!
18
17 20
19
66
16
Accessory list for this page.
Install the main landing gear
Engine:100cc gasEngine:100cc gas
Diameter
5X25mm screw
5mm Bind nut
5mm Washer
- - - - - - - - 4
- - - - - - - - 4
- - - - 4
Install the engine
5X55mm screw
5mm Locknut
5mm Washer
- - - - - - - - 4
- - - - - - - - 4
- - - - 2
Install the main landing gear
5.2mm5.2mm
5.2mm5.2mm
A B
A B
Install the wing support
AB
Install the wing support
3X20mm screw 3mm nut 3mm Washer
- - - - - - - - 16
- - - - - - - - 8
- - - - - - - - 8
Aluminum plank Aluminum plank
Wood support
3X20mm Tpscrew
- - - - - - - 8
5X25mm screw
5mm Bindnut
5mm Washer
- - - - - - - - 8
- - - - - - - - 4
- - - - 4 5X55mm screw
5mm Locknut
- - - - - - - - 4
- - - - 2
3X20mm screw 3mm nut
3mm Washer
- - - - - - - - 16
- - - - - - - - 8
- - - - - - - - 8
3X20mm Tpscrew
- - - - - - - 8

!
23
22 25
24
77
21
Accessory list for this page.
Install the engine
3X20mm Screw
- - - - 1- - - - 1
Assembly of the full tank
Install the cowling
1.8X450mm Rod
- - - - - - 1
Linkage Stopper
2mm Nut
- - - - 1- - - - 1
- - - - 1
3X3mm Screw
- - - - - - 1
160mm Fuel tankFuel tank
Engine :80-100cc gas
Radio Equipment
Install the cowling
BatteryBattery Receiver/BatteryReceiver/Battery
3mm Bind nut
- - - - - - - - 5
6mm Plywood
- - - - - - - - 1
A B
A B
A B
A B
A B
3.2mm
A B
A B
10.5mm
20mm
3.2mm
3X25mm screw
3mm Washer
- - - - - - - - 5
- - - - - - - - 5
1.8X450mm Rod
- - - - - - 1
Linkage Stopper
2mm Nut
- - - - 1
- - - - 1
3X3mm Screw
- - - - - - 1
3mm Bind nut
- - - - - - - - 5
6mm Plywood
- - - - - - - - 1 3X25mm screw
3mm Washer
3X20mm Screw
- - - - - - 5
- - - - - - 1
- - - - - - 5
After confirmingthe
position(see frontof
fuel tank).
Insert and tighten
the screw.
3.2mm 3.2mm

!
28
27 30
29
88
26
Accessory list for this page.
Install the canopy
Cut away thesurplus pats ofcanopy
care fully alongthe shaded line,
Outside the line8mm
AB
8mm
ABABAB
AB
ABAB
L
R
ABAB
Fasten
Loose-leaf
Hard wood
Balsa
- - - - - 2
- - - - - 4
- - - - - 4
- - - - - 2
Hard wood
Hard wood
Balsa
Loose-leaf
Fasten
Loose-leaf
2.3X8mm Tp screw
- - - - - - 8
Fasten
Loose-leaf
Hard wood
Balsa
- - - - - 2
- - - - - 4
- - - - - 4
- - - - - 2
2.3X8mm Tp screw
- - - - - - 8
Install the windows
Install the door and windows
2.3X10mm Tp screw
- - - - - - 4
Install the coverInstall the cover
Install the door and windows
2.3X10mm Tp screw
- - - - - - 4
L
R

!
33
32 35
34
99
31
Accessory list for this page.
Install the float
you should install the float to fly
the plane on water.
Install the servo of float
The wing support's install method
while installing float.
Diameter
4X25mm screw
4mm Bind nut
4mm Washer
- - - - - - - - 8
- - - - - - - - 8
- - - - 8
4.2mm4.2mm
Install the float
4.2mm4.2mm
4X25mm screw 4mm Washer
- - - - - - - - 8
- - - - 8
4X16mm screw
- - - - 12
3X20mm screw
3mm nut
3mm Washer
- - - - - - - - 16
- - - - - - - - 8
- - - - - - - - 8
4mm Lock nut
- - - - - - - - 12 3X20mm Tp screw
- - - - - - - 8 3X20mm Tpscrew
- - - - - - - - 4
2.3X10mm Tp screw
- - - - 8
L
R
L
R
The coverThe cover
3X20mm Tp screw
3.2mm Nylon Collar
3.2mm Collar
3X3mm Screw
- - - - - - 2
- - - - - - 2
- - - - - - 4
3.2mm Rocker
- - - 2
- - - - - - 8
Rod
2X8mm screw
- - - - 4
Rod adjuster
- - - - 4 Aluminium tube
- - - - 8
1800mm Steel wire
- - - - 4
- - - - - - 4
3.5X50 mm Pvc tube
- - - - 4
3X20mm screw
3mm nut
3mm Washer
- - - - - - - - 16
- - - - - - - - 8
3.2mm Nylon Collar
3.2mm Collar
3X3mm Screw
- - - - - - 2
- - - - - - 2
- - - - - - 4
3.2mm Rocker
- - - 2
Rod
2X8mm screw
- - - - 4
Rod adjuster
- - - - 4
Aluminium tube
- - - - 8
1800mm Steel wire
- - - - 4
- - - - - - 4
3.5X50 mm Pvc tube
- - - - 4
4mm Bind nut
4mm Washer
- - - - - - - - 16
- - - - - - - - 8
4X25mm screw
- - - - 16
4X16mm screw
- - - - 12
4mm Lock nut
3X20mm Tp screw
- - - - - - - 20
2.3X10mm Tp screw
- - - - 8
- - - - - - - - 12
- - - - - - - - 8
A B
9mm plywood
- - - - 2
9mm plywood
- - - - - - - - 2
A B

38
37 39
Side view
ELEVATOR
Adjust the travel of each control surface to the
values in the diagrams.
These values fit general flight capabilities.
Readjust according to your needs and flight level.
Top view
36
AILERON
Adjustment.
Top view
Adjust the travel of each control surface to the
values in the diagrams.
These values fit general flight capabilities.
Readjust according to your needs and flight level.
1010
Adjustment.
Never fly before checking the Cg s required position.
In order to obtain the CG specified ,reposition the
receiver and battery.
NEVER fly the model
without well balancing.
Warning!
!
CGCG
Side view
Rudder
Adjust the travel of each control surface to the
values in the diagrams.
These values fit general flight capabilities.
Readjust according to your needs and flight level.
Top view
100-110mm100-110mm
Adjustment
Side view
Adjustment.
Aileron
Flap
CGCG
45
45
45
45
45
45
45