CYmodel CY8142 User manual

Before commencingassembly,please readthese instructionsthoroughly.
SAFETY PRECAUTIONS
This radio control model is not a toy!
lFirst-time buildersshould seekadvice frompeople havingbuilding
experience inorder toassemble themodel correctlyand toproduce
its performanceto fullextent. ,
lAssemble thiskit onlyin placesout ofchildrens reach!
lTakeenough safetyprecautions priorto operatingthis model.
,
You areresponsible forthis models assemblyand safeoperation!
lAlways keepthis instructionmanual readyat handfor quick
reference,even aftercompleting theassembly.
lCould causeserious injuryor evendeath
SPECIFICATION
Wing Span: 2400mm (94.5in)
2
Wing Area: 97dm (1503.9sq.in)
Total Length: 2010 mm (79.1 in)
Engine :80-100cc gas engine
Radio : 6 channels ,9 servos
FW 190

REQUIRED FOR OPERATION (Purchase separately)REQUIRED FOR OPERATION (Purchase separately)REQUIRED FOR OPERATION (Purchase separately)REQUIRED FOR OPERATION (Purchase separately)
TOOLS REQUIRED ( Purchase separately)TOOLS REQUIRED ( Purchase separately)TOOLS REQUIRED ( Purchase separately)TOOLS REQUIRED ( Purchase separately)
BEFOREYOUBEGINBEFOREYOUBEGINBEFOREYOUBEGINBEFOREYOUBEGIN
SharpHobbyKnife Phillips Screw Driver Awl
NeedleNosePliers Wire Cutters Scissors
Read through the manual before you begin ,so you will have an overall idea of what to do.
Check all parts .if you find any defective or missing parts .contact your local deater.
Symbols used throughout this instruction manual,comprise.
111
222
333
.
.
Warning!
!
Do not overlook this symbol.
Aminimum 6channel radio for airplanes (with 9servos).
And dry batteries.
CAUTION: Only use a minimum 6channel radio for
airplanes! (No other radio may be used!)
!
12 AA-size Batteries
Aminimum 4channel
transmitter for airplanes.
For handing the radio properly.refer to its instruction manual.
Engine and Muffler
Purchase a propeller that
will match your engine
Silicone Tube Fuel Filter
required for engine starting Glow engine fuel only.
WARNING: Normal gasoline cannot
be used with glow engines.
!
Fuel Pump Plug Wrench
Glue
Instant glue
Epoxy Glue
Other equipment for enhancing
airplane operation & perormance
12VBattery (for starter)
Engine Starter
BBBB
20X10----22X10
22
Cut off shaded portion.
Ensure smooth non-binding
movement while assembling.
Must be purchased
separately!
Pay close attention
here!
Drill holes with the specified
Diameter(here:2mm)
Assemble left and right
Sides the same way.
Apply instant glue
(CA glue,super glue).
Apply epoxy glue.
Cut off excess.
502
C.AC.A
LL
RR
AB2mm2mm
99
44
11
77
66
55
88
Muffler
DA 50R
3W 50i
Muffler
Ignition
Ignition
Model Airplaneengine:50ccgasengine
receiver
22
Battery (need 2)
33
Servo(need 9 servos )
remote control
Switch (need 2)
AA

!
3
2
1
5
4
33
Install the aileron
Please notice the illustration below when
epoxy the pin hinges to the aileron
Tailing edge
Flap
Install the servo of flap
Install the servo of aileron
Hinge
Install the servo
Aileron Flap
Accessory list for this page.
Hinge
- - - - - 6
LL
RR
LL
RR
LL
RR
Securely glue together. If comingoff duringflights,you'll
lose control ofyour airplane whichleads to accidents!
Warning!Warning!
AB
Rod adjuster
Connecting rod head
3X30mm screw
2X8mm screw - - - - - 2
- - - - - 2
- - - - - 6
- - - - - 2
2.5X85mm rod
- - - - - 2
HORN
- - - - - 2
- - - - - 2
4X30 Screw
- - - - - 2
Servo line
Rod adjuster
Connecting rod head
3X12mm Tp screw
2X8mm screw - - - - - 2
- - - - - 2
- - - - - 6
- - - - - 2
2.5X85mm rod
- - - - - 2
HORN
- - - - - 2
4X30 Screw
- - - - - 2
Servo line
LL
RR
3mm3mm
3mm3mm
Rod adjuster
Connecting rod head
3X30mm screw
2X8mm screw
- - - - - 4
- - - - - 4
- - - - - 6
- - - - - 4
2.5X85mm rod
- - - - - 4
HORN
- - - - - 4
- - - - - 2
4X30 Screw
- - - - - 4
3X12mm Tpscrew
- - - - - 6
- - - - - 6
Must be purchased
separately!

!
8
7
6
10
9
44
Install the missile Install the missile
Install the missile
Install the missile
2mm plywood
- - - - - - - 1
2mm plywood
Accessory list for this page.
Main wing.Before installing screw,
the tube need to drill a hole
Top view
Servo lineServo line
Servo lineServo line
8mm nylon Nut
- - - - - 2
8mm nylon screw
- - - - - 2
8mm nylon Nut
- - - - - 2
8mm nylon screw
- - - - - 2
8mm8mm
502
C.AC.A
AB
8mm8mm
- - - - - 1

!
13
12 15
1414
55
11
Accessory list for this page.
Main wing.Before installing screw,
the tube need to drill a hole
Install the main landing gear
Bottom view
4X30mm screw
- - - - - 4
4mm Washer
- - - - - 4
4.2mm4.2mm
25X715mm tube25X715mm tube
12X165mm tube12X165mm tube
12X165mm tube12X165mm tube
Install the main landing gear
Install the main landing gear
Install the main landing gear
LL
RR
3X3mm screw
5.2mm Collar
3X20mm Tp screw
- - - - - 8
5X45mm Axletree
- - - - - 2
- - - - - 2
- - - - - 2
4X4mm screw
- - - - - 2
After glue the PVC cover,
cut off its excess part.
AB
LL
RR
2mm plywood 3mm plywood
- - - - 2 - - - - 4
Constrictive
- - - - 4
3X3mm screw
5.2mm Collar
3X20mm Tp screw
- - - - - 8
5X45mm Axletree
- - - - - 2
- - - - - 2
- - - - - 2
4X4mm screw
- - - - - 2
2mm plywood
3mm plywood
- - - - 2
- - - - 4
Constrictive
- - - - 4
4X30mm screw
- - - - - 4
4mm Washer- - - - - 4

!
18
17 20
19
16
66
Accessory list for this page.
Main wing
Main wing
Install the elevator
8mm8mm
5mm5mm
5mm Bind nut
5X50mm screw
- - - - - 2
5mm Washer
- - - - - 2 - - - - - 2
8X40mm Carbon tube
- - - - - 2
8mm8mm
135135
135135
Securely glue together. If comingoff during flights,you'll
lose control ofyour airplane whichleads to accidents!
Warning!Warning!
LL
RR
Install the elevator
Main wing
Securely glue together
,if coming off during flights.
You lose control of your airplane
which leads to accidents!
AAA
Warning!Warning!
A
8X40mm Carbontube
- - - - - 2
5mm Bindnut
5X50mm screw
5mm Washer
- - - - - 2
- - - - - 2
- - - - - 2

!
23
22 25
24
77
21
Accessory list for this page.
Install the servo of elevator
Rod adjuster
Connecting rod head
3X30mm screw
2X8mm screw
- - - - - 2
- - - - - 2
- - - - - 6
- - - - - 2
2.5X85mm rod
- - - - - 2
HORN
- - - - - 2
- - - - - 2
4X30 Screw
- - - - - 2
LL
RR
2.3X10mm Tp screw
- - - - - 8
Install the elevator,
put the servo line into the fuselage
AB
AB
LL
RR
Install the servo of elevator
Servo line
4X16mm screw
4mm Washer
- - - - - - - - 2
- - - - 2
Before installing screw,
the tube need to drill a hole
4.2mm4.2mm
12X330mm tube12X330mm tube
Install the rudder and tail wheel
- - - - 2
- - - - 1
4.2mm Collar
3.2mm Nylon Collar
3X3mm Screw
- - - - 2
3X12 Tp screw
- - - - 3
1.5mm1.5mm
3mm3mm
4X16mm screw
4mm Washer
- - - - - - - - 2
- - - - 2
Rod adjuster
Connecting rod head
3X30mm screw
2X8mm screw
- - - - - 2
- - - - - 2
- - - - - 7
- - - - - 2
2.5X85mm rod
- - - - - 2
HORN - - - - - 2
- - - - - 2
4X30 Screw
- - - - - 2
2.3X10mm Tp screw
- - - - - 8
Install the rudder and tail wheel
3X30mm screw
- - - - - 1
4X30mm screw
- - - - - 1
4.2mm Rocker
- - - - - 1
- - - - 2
- - - - 1
4.2mm Collar
3.2mm Nylon Collar
3X3mm Screw
- - - - 2
3X12 Tp screw
- - - - 3
4X25mm screw
- - - - - 1
4.2mm Rocker
- - - - - 1
3mm Lock nut
- - - - - 1
3mm Lock nut
- - - - - 1

!
28
30
88
26 29
27
Accessory list for this page.
Install the servo of rudder
Install the rudder and tail wheel
55
3mm nut
Aluminium tube
1400mm Steel wire
Rod adjuster
Connecting rod head
3X35mm screw
2X8mm screw - - - - - 2
- - - - - 2
- - - - - 3
- - - - - 2
HORN
- - - - - 2
4X30 Screw
- - - - - 2
- - - - - 3
Rod - - - - - 2
- - - - - 2
- - - - - 2
Aluminium tube
Rod adjuster
Connecting rod head
2X8mm screw
- - - - - 2
- - - - - 2
- - - - - 2
Rod - - - - - 2
- - - - - 2
Install the rudder and tail wheel
Securely glue together
,if coming off during flights.
You lose control of your airplane
which leads to accidents!
DD
DD
3mm3mm
Install the engine.
Engine:50cc
1.8X350mm Rod
- - - - - - 1
Linkage Stopper
2mm Nut
- - - - 1- - - - 1
- - - - 1
3X3mm Screw
- - - - - - 1
Fuel tankFuel tank
3mm nut
Aluminium tube
1400mm Steel wire
Rod adjuster
Connecting rod head
3X35mm screw
2X8mm screw
- - - - - 4
- - - - - 4 - - - - - 3
- - - - - 4
HORN
- - - - - 2
4X30 Screw
- - - - - 2
- - - - - 3
Rod - - - - - 4
- - - - - 2
- - - - - 4
1.8X350mm Rod
Linkage Stopper
2mm Nut
3X3mm Screw
- - - - - 1
- - - - - 1
- - - - - 1
- - - - - 1
Horizontal/Vertical tail
80mm spring
- - - - - 2
50mm spring
- - - - - 2

!
33
32 35
34
99
31
Accessory list for this page.
Install the cowling
Install the canopy
Assembly of the full tank
After confirmingthe
position(see frontof
fuel tank).
Insert and tighten
the screw.
Radio Equipment
Install the canopy
BatteryBattery ReceiverReceiver
2.3X10mm Tpscrew
- - - - - 4
SpinnerSpinner
PropellerPropeller
2.6X12mm Tpscrew
- - - - - 6
Cut awaythe surpluspats ofcanopy
care fullyalong theshaded line.
2.3X10mm Tpscrew
- - - - - 4
2.6X12mm Tpscrew
- - - - - 6
Air tankAir tank

38
37 39
Side view
ELEVATOR
Adjust the travel of each control surface to the
values in the diagrams.
These values fit general flight capabilities.
Readjust according to your needs and flight level.
Top view
36
AILERON
Adjustment.
Top view
Adjust the travel of each control surface to the
values in the diagrams.
These values fit general flight capabilities.
Readjust according to your needs and flight level.
1010
Adjustment.
Never fly before checking the Cg s required position.
In order to obtain the CG specified ,reposition the
receiver and battery.
NEVER fly the model
without well balancing.
Warning!
!
CGCG
Side view
Rudder
Adjust the travel of each control surface to the
values in the diagrams.
These values fit general flight capabilities.
Readjust according to your needs and flight level.
Top view
140-150mm140-150mm
Adjustment
Side view
Adjustment.
Aileron
Flap
CGCG
45
45
90
45
45
45
45